Face protection
Mouth protection, FFP Masks, beard protection: this is about protection and hygiene. Products in the head protection and face protection category protect against hazards as PPE or prevent contamination as a hygiene measure. Franz Mensch pays special attention to legal standards and high wearing comfort.
Sorting:
%
Respirators FFP2 NR, vertically foldable, ear loops | PP
Respirators FFP2 NR with ear loopsThe respirators are made of high-quality PP fleece and are folded vertically. The wearing method with the ear loops is particularly practical if the mask is frequently put on and taken off in everyday life. In addition, folding masks with ear loops are cheaper than overhead straps or pre-formed protective masks. The FFP2 NR respirators come with an S-hook that allows an alternative way of wearing them. Simply close the loops at the back of the head with the hook. This relieves the strain on your ears and makes the mask noticeably more comfortable even when worn for long periods. The FFP2 masks are ideal for medicine, laboratory, nursing, hospital as protective equipment, food industry and hygiene-sensitive areas. They reliably protect against solid and liquid harmful dusts, smoke and aerosols.Features of the respirators FFP2 NR with ear loops at a glance: folding mask, folded verticallypractical ear loops, more favourable than headbandshigh quality PP fleeceflexible noseband for a tight fitreduces the absorption and transmission of infectious agentsindividually packed
not available
From
€15.10
100 Stück
Beard cover | PP
Beard cover made of PP by HygostarThis beard cover is made of high quality, air-permeable PP fleece. The material is pleasantly light and soft. A beard cover is an important addition to the hygiene clothing and is usually worn in combination with a hood. It is elastic and covers even long beards very well. For even more hygiene, the elastic beard cover can also be pulled over the nose. This reliably prevents beard hairs from contaminating your product or food.The fleece beard cover is for single use and therefore very hygienic. At the same time, it offers your employees a high level of wearing comfort, because the latex-free elastic is worn over the head. In this way, nothing presses behind the ears and the beard cover is comfortable to wear for a long time. A beard cover made of PP fleece is often worn in very hygiene-sensitive areas. These include, for example, food industry, kitchens, industry, chemical or pharmaceutical.Tip: Detectable beard coverDetectable beard covers are available especially for the food industry and production facilities with strict hygiene requirements. This beard cover is made of PP fleece and additionally equipped with a detector strip. It is therefore detectable by the detector machines if it ever gets into the production. Find out more about detectable beard covers here.Matching dispensers for beard cover:Art.-Nr. 8895: Multi-Dispenser made of AcrylArt.-Nr. 88950: Double dispenser for disposable clothing "Double" made of AcrylArt.-Nr. 88939: Multi-Dispenser made of stainless steelFeatures of the beard cover made of PP at a glance:high-quality PP fleece, air-permeable and lightweighthigh wearing comfortcovers also long beardsfood safelatex-free elastic bandshead elastic, no pressing behind the earsvery elastic, can be additionally pulled over the noseprotection against minor mechanical risks
not available
From
€1.84
100 Stück
Face masks type IIR, 3-ply | PP
Face masks type IIR, 3-ply made of PP by HygostarThe face mask type IIR is a surgical mask with an excellent filter performance of 98% BFE. The "R" in the designation indicates that the face mask offers additional splash protection, for example against contaminated liquids such as blood. The face mask therefore fulfils all requirements for medical use - also suitable for operating theatres. The face mask type IIR is 3-layered and made of high-quality PP fleece. The material is soft and comfortable to wear. Advantages of the face mask type IIR, 3-ply at a glance:Particularly high quality, splash protection against contaminated liquidsProven filter performance of 98 % BFEas external protection against droplet infections3-ply, high-quality PP materiallatex-free ear loopsIntegrated nose clip for a good fitFor single use only
not available
From
€1.69
100 Stück
Face masks type II, 3-ply | PP
Face masks type II, 3-ply made of PP from HygostarThis medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
not available
From
€1.69
100 Stück
%
Respirators FFP2 NR, 3D | PP
Respirators FFP2 NR, 3D made of PP
The most comfortable FFP2 mask on the market: noticeably easier breathing, no pressure behind the ears and pleasant ventilation. The FFP2 NR respirators in 3D panel design are a real innovation. The FFP2 masks convince with their high wearing comfort - even during long and frequent wearing. Thanks to the three-part 3D panel design (also called fish shape) and the high-quality, soft PP fleece, the respirators are as pleasantly light to wear as a surgical mask. The extremely low breathing resistance makes it much easier to breathe in and out, and you can breathe through in a relaxed manner - 50% better breathing ability than the standard.
At the same time, the masks meet the high standard of an FFP2 respirator and reliably protect against liquid and solid aerosols. The FFP2 mask in fish shape achieve a top filtering performance of over 99%.
Even more comfort is provided by the soft ear elastics and the low weight of the masks. This reduces the pressure behind the ears and the FFP2 masks are comfortable for a long time. The malleable nosepiece and ergonomic fit allow the mask to fit very close to the face - for high protection and less fogging of glasses.
*Your advantage: The 3D-respirators FFP2 NR have a pharmaceutical central number (PZN): single package - PZN 18018012; box - PZN 18018029
Advantages of the FFP2 NR, 3D | PP respirators at a glance:
Premium mask for easier breathing
especially breathable and comfortable
made of soft, high-quality PP fleece
easy to wear, similar to a mouth guard
excellent filter performance according to FFP2 standard
optimal fit and formable nose clip for a tight fit
good visibility due to less fogging of the goggles
soft ear loops for less pressure behind the ears
hygienic in single pack
horizontally folded, fish shape in three-part 3D panel design
not available
From
€15.45
100 Stück
Respirators FFP2 NR, cup-shaped | PP, sale item
Respirators FFP2 NR, cup-shaped, made of PP, sale itemRemaining shelf life of max. 2 months, but extremely affordable! Still the same high quality and perfect for anyone who uses them frequently and in large quantities. Get these respiratory masks at a special price.These FFP2 masks are designed for single use. They are made of high-quality PP fleece and have an ergonomic fit. Thanks to the pre-formed cup, the FFP2 NR respiratory masks fit particularly well. The cups seal tightly at the edges and on the face, which significantly increases the protective effect of the masks. The respiratory masks are equipped with headbands. Compared to ear loops, headbands are particularly comfortable because there is no pressure behind the ears. The soft nose pad provides additional wearing comfort. The FFP2 masks protect against harmful dusts, smoke, and aerosols. They are ideal for use in medicine, laboratories, care, hospitals as protective equipment, industry, food industry, and hygiene-sensitive areas.Advantages of the sale items respiratory masks FFP2 NR, cup-shaped at a glance:sale item with a short remaining shelf life of max. 2 monthsunchanged quality, but extremely affordablehigh-quality, soft PP fleecepre-formed, ergonomic cup for a very tight fitwith headbands, very comfortable, no pressure behind the earsreduces intake and transmission of infectious agentsprotection against solid and liquid harmful dusts, smoke, and aerosolsflexible nose clip, improves the fitsoft nose pad
not available
From
€9.35
Respirators FFP2 NR, 3D | PP, sale item
Respirators FFP2 NR, 3D, made of PP, sale itemRemaining shelf life of max. 2 months, but extremely low-priced! Same reliable quality and perfect for everyone who uses them frequently and in large quantities. Get respirator masks at a special price.The FFP2 NR 3D respirator masks are the most comfortable FFP2 masks on the market: noticeably easier breathing, no pressure behind the ears, and pleasant ventilation. They are made in a 3D panel design and are a true innovation. The FFP2 masks impress with their high wearing comfort – even during long and frequent use. Thanks to the three-piece 3D panel design (also called fish shape) and the high-quality, soft PP fleece, the respirator masks feel as pleasantly light as a surgical mask. The extremely low breathing resistance makes inhaling and exhaling significantly easier, allowing you to breathe freely – with 50% better breathability than the standard.At the same time, the masks meet the high standard of an FFP2 respirator mask and reliably protect against liquid and solid aerosols. The fish-shaped FFP2 masks achieve a top filtration performance of over 99%.Additional comfort is provided by the soft ear loops and the low weight of the masks. This reduces pressure behind the ears, making the FFP2 masks comfortable to wear for long periods. The moldable nose clip and the ergonomic fit allow the mask to seal closely to the face – ensuring strong protection and reducing fogging of glasses.*Your advantage: The 3D FFP2 NR respirator masks have a pharmaceutical central number (PZN): Single packaging - PZN 18018012; Box - PZN 18018029Advantages of the sale item respirator masks FFP2 NR 3D at a glance:special offer with short remaining shelf lifeunchanged quality, but extremely low-pricedparticularly breathable and comfortablemade of soft, high-quality PP fleecelightweight, similar to a surgical maskexcellent filtration performance according to FFP2 standardoptimal fit and moldable nose clip for a secure sealfor glasses wearers: clear view thanks to reduced foggingsoft ear loops for less pressure behind the earshygienically individually packedhorizontally folded, fish shape in three-piece 3D panel design
not available
From
€9.35
Respirators FFP2 NR, 3D | PP, small package
Respirators FFP2 NR, 3D made of PP as small package
Much easier breathing, no ear pressure and pleasant ventilation: The FFP2 NR respirators in 3D panel design are also available in a small pack. These innovative FFP2 masks are currently the most comfortable on the market. They wear easily and comfortably like a medical mouthguard - even when worn for long periods. The special feature: The high-quality, newly developed fleece material provides 50% more breathing capacity than the standard. You can feel this clearly when breathing in and out. This extremely low breathing resistance of the FFP2 masks and the three-part 3D panel design (also called fish shape) make the masks so comfortable.
In addition, the FFP2 NR 3D respirators achieve a top filtering performance of over 99%. These excellent values ensure high protection against liquid and solid aerosols.
Advantages of the FFP2 NR, 3D respirators in the small pack at a glance:
50% easier to breathe
innovative 3D design, fish shape
in a practical small pack
ultralight, less weight for less pressure behind the ears
ergonomic fit for a tight seal on the face (less fogging of glasses)
premium mask with over 99% filtering efficiency
highest comfort for a long time
made of PP fleece, horizontally folded
malleable nose clip
soft ear loops
hygienic single pack
not available
From
€43.55
100 Stück
Meditrade Respima Respirators FFP2 NR, vertically foldable, ear loops | PP
Meditrade Respima Respirators FFP2 NR, vertically foldable, ear loops | PPThe Meditrade Respima FFP2 NR respirator mask is a vertically foldable, filtering half mask without a valve, offering reliable protection against viruses and bacteria. It is designed for single use and meets the requirements of protection class FFP2. The mask is made from an ultra-light, soft material with a five-layer filter structure that ensures high filtration performance. A lightly adjustable blue nose clip provides a secure fit, while elastic and pleasantly soft ear loops enhance wearing comfort.Properties of Meditrade Respima Respirators FFP2 NR, vertically foldable, ear loops | PP at a glance:reliable FFP2 protection against viruses and bacteriavertically foldable half mask without valveultra-light, soft material with five-layer filter structureadjustable nose clip for a secure fitelastic, comfortable ear loops for high wearing comfortdesigned for single useindividually packaged
not available
From
€17.75
100 Stück
BLS Respirators Zer033, FFP3 R D, with valve
BLS Respirators Zer033, FFP3 R D, with valveThe 3-flap filter masks in the BLS Zer0 Flat series offer a high level of protection combined with exceptional breathing comfort. They have a surface micromesh that prevents clogging of the filter material and the absorption of liquids, thus extending the service life of the mask. The face mask offers the protection of a P3 with the breathability of a P1 and can be used for more than one work shift. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently, which is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The masks offer protection against: Particles and nano-particles (ultra-fine dust), aerosols, biological agents, viruses. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033, FFP3 R D, with valve at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valveTextile straps to avoid trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological
not available
From
€2.88
1 Stück
BLS Respirators BLS O2 103V, FFP3 NR D, with valve
BLS Respirators BLS O2 103V, FFP3 NR D, with valveThe BLS O2 103V FFP3 NR D disposable filter mask guarantees respiratory protection against aerosols and solid particles. The cup-shaped design, the elasticated straps attached at four points and the external nose clip, which can be moulded to the face mask, ensure the best fit for most face types. The external nose clip can be optimally adapted to the nose profile. The exhalation valve reduces breathing resistance and reduces moisture inside the mask, making breathing safer even in humid or very hot workplaces. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. The shelf life of the mask is 10 years.Properties of BLS Respirators BLS O2 103V, FFP3 NR D, with valve at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testWith exhalation valve with low breathing resistanceFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols
not available
From
€1.50
1 Stück
BLS Respirators O2 102, FFP2 NR D
BLS Respirators O2 102, FFP2 NR DThe BLS O2 102 disposable respirator offers respiratory protection against solid particles and aerosols. The cup shape, the four-point elasticated strap and the nose clip that can be adapted to the filter material ensure excellent adaptability to most face shapes. The special shape of the moulded respirator offers increased wearing comfort thanks to reduced breathing resistance. The external nose clip adapts perfectly to the nose profile and ensures good vision, even for spectacle wearers. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. Shelf life of the mask: 10 years.Properties of BLS Respirators O2 102, FFP2 NR D at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testwithout exhalation valveFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols
not available
From
€0.70
1 Stück
BLS Respirators 670next, FFP2 NR D
BLS Respirators 670next, FFP2 NR DThe FFP2 respirator BLS 670next is a 2-fold folded respirator. It is available in 2 different sizes, offering the perfect fit. The mask has a shelf life of 10 years! The mask is without an exhalation valve. The mask can be optimally adjusted in the nose area with the internal nose clip. The textile elastic bands are made of a hypoallergenic, latex-free material and offer a secure and optimal fit and prevent hair from getting caught. Designed as a disposable mask (NR = Not Reusable), the mask has a dolomite dust test. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The addition of an innovative inner core gives the filter mask strength and high breathability combined with low breathing resistance.Properties of BLS Respirators 670next, FFP2 NR D at a glance:2-fold folded design for particularly low breathing resistanceDolomite dust testWithout exhalation valveTextile straps - to avoid trapped hairHygienic individual packagingShelf life of the mask: 10 yearsProtection against dusts/smoke/aerosols of particles of medium toxicity in concentrations
not available
From
€0.89
1 Stück
BLS Respirators Zer033 NV, FFP3 R D
BLS Respirators Zer033 NV, FFP3 R DThe double-folded FFP3 respirator BLS Zer0 33 Flat is a high-end mask that offers maximum protection against: Particles and nanoparticles (ultra-fine dust), aerosols, biological agents, viruses. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently. This is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033 NV, FFP3 R D at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceTextile straps to prevent trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€2.20
1 Stück
Face masks type IIR, 3-ply | PP, sale item
Face masks type IIR, 3-ply made of PP by Hygostar, sale itemThe face mask type IIR is a surgical mask with an excellent filter performance of 98 % BFE. The ‘R’ in the type designation indicates that this mask also offers splash protection - for example against contaminated liquids such as blood. The face mask therefore fulfils all requirements for medical use and is also suitable for use in operating theatres. The type IIR mask has a 3-layer construction and is made of high-quality, soft PP fleece. The material is pleasant on the skin and ensures a high level of comfort - even when worn for long periods.Advantages of the face mask type IIR, 3-ply, sale item at a glance:Particularly high quality, splash protection against contaminated liquidsProven filter performance of 98 % BFEas external protection against droplet infections3-ply, high-quality PP materiallatex-free ear loopsIntegrated nose clip for a good fitFor single use only
not available
From
€1.29
Face masks type II, 3-ply | PP, sale item
Face masks type II, 3-ply made of PP from Hygostar, sale itemThis medical mask complies with the "Type II" standard. This means it is approved for medical use and serves as effective third-party protection in hospitals and care facilities – including use as a surgical mask. Type II face masks have been proven to protect against droplet transmission. Featuring a 3-layer design, the mask delivers excellent filtration performance with a Bacterial Filtration Efficiency (BFE) of 98%, thanks to the integrated filter layer.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply, sale item at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
not available
From
€1.19
BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve
BLS Respirators Zer032 C flame retardant, FFP3 R D, with valveThe new series of BLS moulded masks has been designed to offer you both: Maximum protection and maximum comfort. The mask offers flame protection and is therefore ideal for welding work. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elasticated straps makes it easy and secure to fit all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odours caused by organic and acid gases and vapours, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. Suitable against gases and vapours that are organic as well as acidic with concentrations lower than TLV.Properties of BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve at a glance:with flame protectionIdeal for welding work (even with by-products such as ozone)Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapours with concentrations below the TLV limit valueIntegrated nose flap and adjustable strapsWith sealing tape to effectively prevent leaks, even with most bearded wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€6.90
1 Stück
Beard cover Eco | PP, machine made
Beard cover Eco made of PP by HygonormThe beard cover Eco made of PP fleece is an extremely affordable option as it is it is machine-made. The beard cover is therefore ideal for short wearing times and high demand. It is made of lightweight PP material and is very permeable to air. It provides more safety in sensitive hygiene areas, as it reliably covers the beard hairs. The Eco beard cover is especially recommended for the food industry and kitchens.Features of the beard cover Eco at a glance:extra favourable, as machine-madeair-permeable and lightlight fleece made of PPlatex-free rubber bandssuitable for food areasprotection against low superficial mechanical risks
not available
From
€1.60
100 Stück
Beard cover with earloops | PP
Beard cover with ear loops made of PP from HygostarSo practical: this beard cover is simply worn with ear loops. The comfortable loops hold particularly well behind the ears so that the beard protector stays securely in place. The beard cover is made of soft PP nonwoven, is food-safe and ideal for all hygiene areas in the food industry. A beard cover ideally complements other hygiene garments such as bonnets or astro caps. It can be quickly changed if necessary and specifically covers the beard hairs. The beard cover with ear loops is elastic and fits very well.Advantages of the PP Beard cover with ear loops at a glance:very hygienic, as for single usewith ear loops for a secure holdlatex-freemade of PP fleecesoft, air-permeable and lightfood safesuitable dispensers for beard covers with ear loops are available here:art.-no. 88939: stainless steel dispenserart.-no. 88963: bulk dispenserart.-no. 8895: acrylic dispenserart.-no. 88950: double dispenser made of acrylic
not available
From
€2.50
100 Stück
Beard cover Large | PP
Beard cover Large made of PP by Hygostar
This beard cover is particularly large and stows even long beards safely and hygienically. The beard cover is made of high-quality, soft PP fleece. It is permeable to air and comfortable to wear for a long time. The beard cover Large is ideal in particularly hygiene-sensitive areas, food industry and kitchens.
Features of the beard cover Large at a glance:
large size, covers also very long beards
high-quality PP fleece, air-permeable
soft and easy to wear
latex fine rubber bands
approved for contact with food
protection against low superficial mechanical risks
not available
From
€2.62
100 Stück
Respirators FFP2 NR with valve, vertically foldable | PP
Respirators FFP2 NR with valve, vertically foldable made of PP by Hygostar
FFP2 masks with valve are particularly comfortable. The breathing valve noticeably facilitates inhalation and exhalation. The FFP2 NR respirators are vertically folded and therefore particularly space-saving. The folding masks are made of high-quality PP material and provide reliable protection of the FFP2 category. FFP2 masks protect against solid and liquid harmful dusts, smoke and aerosols. They are ideal for employees in hygienic areas such as medicine, laboratory, nursing, hospital, industry or food production. The FFP2 NR respirators are for single use - identified by the abbreviation "NR" for "not reusable". The head band ensure a tight fit without pressing behind the ears.
Features of the respirators FFP2 NR with valve, vertically foldable at a glance:
high-quality fleece made of PP
vertically folded
low breathing resistance thanks to valve
with overhead straps for tight fit
malleable nose clip
very comfortable
protection against solid and liquid harmful dusts, smoke and aerosols
Masks are individually packed
not available
From
€28.95
100 Stück
Respirators FFP3 NR with valve, vertically foldable | PP
Respirators FFP3 NR with valve, vertically foldable made of PP by HygostarThe FFP3 respirators with valve meet the highest category of respiratory protection filter classes. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. They are particularly suitable for sensitive areas where hygiene and protection against infection are top priorities. These include medicine, laboratory, nursing, hospital as protective equipment, industry and food industry. the respirators FFP3 NR have an integrated valve. So you breathe noticeably easier and more comfortable. The masks are fixed with head band - without pressing behind the ear. So the FFP3 masks feel comfortable even when worn for long periods.Features of the respirators FFP3 NR with valve, vertically foldable at a glance:high wearing comforthigh-quality material made of PP fleecevertically folded, large breathing surfacevalve facilitates inhalation and exhalationwith head band - no pressure behind the earwith clip for easier putting on and taking off of the maskflexible nose clip for tight fiteach mask individually packed in a hygienic bag, 10 x 10 bags in a box
not available
From
€63.05
100 Stück
Face masks type II, 3-ply | PP, ties
Face masks type II, 3-ply made of PP with ties by Hygostar
The face mask type II is 3-layer and approved for medical use. The masks achieve an excellent filtering performance of 98% BFE. Thus, they are suitable as foreign protection in hospital, medical and nursing. The face mask covers the mouth and nose and protects against droplet infections. The masks are worn with tie straps. Simply tie at the desired length at the back of the head. Nice side effect: No pressure behind the ears and a comfortable wearing feeling over a long time.
Features of the Face masks type II, 3-ply with ties at a glance:
3-layer medical mask made of PP fleece
meets the "Type II" standard
excellent filtering performance, 98 % BFE
tie straps for tight fit, no pressure behind the ears
malleable nosepiece, individually adjustable
for single use
for external protection in hospital and care areas, prevents droplet infection
not available
From
€2.79
100 Stück
Respirators FFP2 NR with valve, cup-shaped | PP, economy pack
Respirators FFP2 NR with valve, cup-shaped made of PP by Hygostar
Cup shaped protective masks such as the FFP2 NR respirators with valve seal particularly well against the face. They are superior to folding masks in terms of tightness. The preformed cups of the FFP2 masks are made of high-quality PP fleece - pleasant and soft on the skin. The integrated breathing valve makes exhalation noticeably easier. The FFP2 NR respirators are ideal for industry, the food industry and hygiene-sensitive areas. They protect against solid and liquid harmful dusts, smoke and aerosols. The FFP2 masks are worn with head band and prevent uncomfortable pressure behind the ears.
Features of the respirators FFP2 NR with valve, cup-shaped at a glance:
ergonomic fit thanks to preformed cup
high-quality PP fleece
valve facilitates breathing
with overhead straps, no pressure behind the ears
comfortable nose cushion
flexible noseband for a tight fit
not available
From
€21.90
price reduced
Face masks type II, 3-ply | PP, economy pack
Face masks type II, 3-ply made of PP from Hygostar
This medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.
The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.
Hygiene with colour system: surgical mask and mouthguard also in black or pink
The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas.
Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.
Advantages of the face masks type II, 3-ply at a glance:
3-layer, soft PP fleece
filter performance of 98 % BFE
can be worn behind the ear with elastic bands, latex-free
integrated nose clip, anatomically formable for a good fit
for single use
for external protection (protection against droplet infection) in the hospital and care sector
pharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)
Suitable wall holder for mouthguard boxes:
art.-no. 88934: Stainless steel mouth guard dispenser
What is a medical face mask type II?
Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.
Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):
Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.
Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.
Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
not available
From
€1.46
Respirators FFP2 NR, vertically foldable | PP
Respirators FFP2 NR, vertical foldable made of PP
FFP2 NR respirators are made of high quality breathable PP fleece. They meet the FFP2 performance level and thus protect against solid and liquid harmful dusts, smoke and aerosols. The FFP2 masks are versatile and reduce the absorption and transmission of infectious agents. The protective masks are particularly suitable for employees in medicine, laboratory, nursing, hospital as protective equipment, industry, food industry and hygiene-sensitive areas.
The FFP2 protective masks are folded vertically, providing a large breathing surface for easier inhalation and exhalation. At the same time, folded respirators are a cheaper alternative to preformed cups because they are easier to manufacture. Thanks to the moldable nose clip, the disposable masks seal well and fit tightly to the face. The elastic, latex-free headgear does not pinch behind the ears and is very comfortable over a long period of time.
Advantages of the respirators FFP2 NR, vertical foldable at a glance:
vertically folded, large breathing surface
latex-free headband, no pressure behind the ears
very comfortable even when worn for long periods
breathable, high quality PP fleece
malleable nose clip for tight fit and good seal
reliable filter performance of level FFP2
protection against solid and liquid harmful dusts, smoke and aerosols
individually packed in a hygienic bag
pharmacy central number (PZN) 1 piece: 17162089
pharmacy central number (PZN) 10 pieces: 17161279
What you should know about respirators
When it comes to respirators, all guideline values and minimum requirements are defined in EN149:2001 + A1:2009. The filter classes FFP1, FFP2 and FFP3 are also precisely defined there. Read the most important facts about the so-called filtering half masks here.
Respirators (also called fine dust masks) that comply with EN 149 are suitable for use with liquid and solid aerosols and protect the wearer from these health hazards. They are part of the PPE (Personal Protective Equipment) and are required by law in many industrial work areas.
Respirators are divided into three protection classes: FFP1, FFP2 and FFP3. The protection classes are based on the so-called MAK value: The value corresponds to the concentration at the workplace to which an employee can be exposed without suffering an adverse health effect. FFP1 = small particle quantities; FFP2 = medium particle quantities; FFP3 = large particle quantities. The abbreviation FFP stands for Filtering Face Piece.
In accordance with legal requirements, the protective masks are tested with sodium chloride (solid aerosols) and with kerosene oil (liquid aerosols). Depending on the filter class, respirators protect against many times the MAK limit value (VdGW).
Filter class FFP1
up to 4 times MAK, application: protection against coarse, health-endangering dry particles and aerosols; e.g. wood grinding dust, quartz dust, coarser allergens, pollen, etc.
Filter class FFP2
up to 10 times MAK, application: protection against dry particles and aerosols hazardous to health; e.g. metal dusts, mineral fiber dusts, polishing dusts, construction site dusts, etc.
Filter class FFP3
up to 30 times MAK, application: protection against very fine, health hazardous dry particles and aerosols e.g. chemical industry, bacteria, viruses, simple radioactive dusts etc.
Why respirators with valve?
FFP masks are also available as a variant with an exhalation valve. This makes breathing noticeably easier and more pleasant. A valve improves ventilation in the mask, lowers the temperature and ensures that less moisture forms in the mask. Protective masks with a valve are therefore more comfortable and more kind to the skin. However, they can only be used for self-protection (PPE), because possible germs of the wearer can be released to the outside world via valve. This means that if the focus is on protection against infection, respirators without a valve should be used. FFP masks without a valve offer both external protection and self-protection.
What does the "NR" mean for protective masks?
NR stands for "Not reusable" and states that it is a disposable mask, which is intended for single use.
not available
From
€24.10
100 Stück
Beard cover | nylon
Beard cover made of nylon by Hygostar
Nylon beard cover is a very high-quality hygiene garment. Nylon is finer, more elastic and therefore noticeably more comfortable than PP fleece. A nylon beard cover is especially recommended for long periods of wear. The material is soft and pleasant to the skin for a long time. Nylon beard cover is ideal in combination with a hood to cover hair in sensitive hygiene areas - ideal for kitchens and food industry.
Features of the beard cover made of nylon at a glance:
soft, very fine structure
air-permeable, elastic and very comfortable
latex-free elastic bands
food-safe
protection against low superficial mechanical risks
not available
From
€7.45
100 Stück
Beard cover with earloops Large | PP
Beard cover with earloops Large made of PP by HygostarBeard covers are worn in hygiene areas such as the food industry. They prevent facial hair and beard hair from contaminating sensitive products and are an integral part of staff hygiene clothing. Franz Mensch offers the Large beard covers for long beards. It is made of soft PP fleece and is particularly elasticated so that it completely covers the beard. The latex-free ear loops ensure a secure and comfortable fit. The beard protector Large with ear loops is for single use and is ideal for wearing with other hygiene clothing such as face masks or ear plugs.Advantages of the beard covers XXL with earloops at a glance:hygienic beard covers in a large sizecover long beards completely and securelywith ear loops for quick put-on and take-offlatex-free, food-safemade of PP fleece, breathable and lightweightalso available in standard size: Art.-Nr. 29220
not available
From
€3.16
100 Stück
Respirators FFP2 NR, cup-shaped | PP
Respirators FFP2 NR, cup-shaped made of PP by Hygostar
These FFP2 masks are high-quality respirators for single use. They are made of breathable PP fleece and have an ergonomic shape. Thanks to the preformed cup, the FFP2 NR respirators fit very well. The cups close particularly tightly at the edges and on the face. This increases the protective effect of the masks. The respirators are to be worn with headwear. This way of wearing is very comfortable, especially during long periods of use, because no rubber presses behind the ears. The soft nose cushion provides additional wearing comfort. The FFP2 masks protect against harmful dusts, smoke and aerosols. They are ideal for medicine, laboratory, nursing, hospital as protective equipment, industry, food industry and hygiene-sensitive areas.
Features of the respirators FFP2 NR, cup-shaped at a glance:
high-quality PP fleece, soft
preformed, ergonomic cup for very tight fit
with head band, very comfortable, no pressure behind the ears
reduces the absorption and transmission of infectious agents
flexible noseband, improves the fit
soft nasal pillow
not available
From
€21.70
100 Stück
Respirators FFP3 NR with valve, horizontally foldable | PP
Respirators FFP3 NR with valve, horizontally foldable made of PP by Hygostar
The respirators FFP3 NR with valve provide a high level of protection. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. Thanks to the incorporated breathing valve, the masks are very comfortable to wear for a long time. The valve reduces breathing resistance and noticeably facilitates inhalation and exhalation. The FFP3 NR respirators with valve are ideal for personnel in industry, food production and other hygiene-sensitive areas. They are horizontally folded and therefore favourable and space-saving.
Features of the respirators FFP3 NR with valve, horizontally foldable at a glance:
high-quality PP fleece, soft on the skin
folded horizontally
breathing valve for easier breathing
head band, no pressure behind the ears
malleable noseband for improved fit
not available
From
€64.25
100 Stück
Respirators FFP3 NR D with valve, cup-shaped | PP
Respirators FFP3 NR D with valve, cup-shaped made of PP by Hygostar
The dolomite respirators meet the high requirements of category FFP3. The masks protect the wearer from toxic and harmful dolomite dusts, smoke and aerosols. They are made of high-quality PP fleece and are particularly tight. The ergonomic shape ensures a very good, tight fit on the face. The integrated valve makes breathing in and out much easier and makes the FFP3 mask comfortable to wear for a long time. The elastic overhead bands are latex-free and do not pinch behind the ears. These dolomite FFP3 respirators are ideal for professionals and high protection requirements. They are particularly used in industry, but are also suitable for the food industry and other hygiene areas.
Features of the respirators FFP3 NR D with valve, cup-shaped at a glance:
protection against the finest dust, also dolomite dust
preformed cup, ergonomic fit
high-quality PP fleece
with valve for easier inhalation and exhalation
with head band, no pressure behind the ears, latex-free
flexible noseband
soft nasal pillow, high wearing comfort
not available
From
€100.50
100 Stück
Respirators FFP2 NR with valve, cup-shaped | PP
Respirators FFP2 NR with valve, cup-shaped made of PP by HygostarCup shaped protective masks such as the FFP2 NR respirators with valve seal particularly well against the face. They are superior to folding masks in terms of tightness. The preformed cups of the FFP2 masks are made of high-quality PP fleece - pleasant and soft on the skin. The integrated breathing valve makes exhalation noticeably easier. The FFP2 NR respirators are ideal for industry, the food industry and hygiene-sensitive areas. They protect against solid and liquid harmful dusts, smoke and aerosols. The FFP2 masks are worn with head band and prevent uncomfortable pressure behind the ears.Features of the respirators FFP2 NR with valve, cup-shaped at a glance:ergonomic fit thanks to preformed cuphigh-quality PP fleecevalve facilitates breathingwith overhead straps, no pressure behind the earscomfortable nose cushionflexible noseband for a tight fit
not available
From
€28.95
100 Stück
Masks and safety goggles: What you should know about safe face protection
In the Franz Mensch online shop, you will find an extensive selection of respirators, face masks, protective goggles and visors that are specially tailored to the needs of commercial customers. From lightweight surgical masks to heavy-duty FFP3 masks, the range of face protection covers all levels of safety and fulfils all requirements in terms of both comfort and protection.
Facts about respiratory masks
For protection against solid and liquid aerosols and particles, respiratory masks, with or without a breathing valve, are an ideal solution for many occupational fields. They are made from high-quality, breathable materials and ensure effective filtering of particles and aerosols. Maximum wearing comfort and excellent test results guarantee you the best face protection. Soft straps and flexible nose pieces ensure a secure fit at all times. Depending on the filter class, FFP 1, FFP 2 and FFP 3, the half masks are suitable for lower to higher risks.
Face masks - infection protection for everyone
The reliable face mask from Franz Mensch is a must in any professional hygiene kit. These masks are lightweight, skin-friendly and offer optimum protection against microorganisms and contamination thanks to their high filter performance. They are particularly indispensable in the healthcare sector. Face masks and filtering half masks must fulfil the requirements for solid and liquid aerosols in accordance with EN 149. Surgical masks provide effective protection against bacteria and germs. These face masks fulfil the requirements of the EN 14683 standard for filter class type II and thus ensure a quality standard for protecting patients and staff against the transmission of germs. They have an optimum filter performance of more than 99%. Franz Mensch offers 1 to 3-layer face masks.
Eye protection for professionals
Safety spectacles combine safety with comfort. They offer complete protection against liquid splashes and dust without impairing vision. The ergonomic shape and adjustable temples ensure a perfect fit for every head shape.
Protective visors
Protective visors are recommended for comprehensive protection against infection and as the ideal complement to face masks. They provide a clear view and protect the entire face from splashes and direct contact. They are easy to fit and can be worn comfortably for long periods of time. The visors are a good alternative to safety goggles, especially for spectacle wearers, as they can be worn comfortably in combination with marine goggles.
At Franz Mensch, we understand that protecting your health and complying with hygiene standards is our top priority. That's why we offer products that not only meet the highest safety requirements, but also impress in terms of comfort and user-friendliness.
Browse through our range and see the quality and variety of our products for yourself. If you have any questions or require personalised advice, please do not hesitate to contact us at any time. Protect yourself and your employees with the best face protection from Franz Mensch - your expert for hygiene products and protective clothing.