Protection gloves & work gloves in comparison

Chemical protective gloves Super High Risk made of nitrile by Hygostar When handling chemicals and biological hazards, you need protective gloves you can rely on. The nitrile gloves Super High Risk they are tested Cat 3 protective glove strong, resilient and safe. At the same time, they fit very well on the hand and offer a lot of sensitivity for precise work. Here you buy high quality chemical protective gloves made of strong nitrile for single use. Nitrile is chemical resistant, resistant to oils, greases and tight against microorganisms and other biological hazards. With the extended cuff, the gloves are approximately 30 cm long overall, providing protection beyond the wrist. This provides even more protection when handling splashes or liquids. The chemical protection gloves are elastic and fit like a second skin. In addition, the textured surface facilitates gripping so that you simply work more quickly and accurately. Thanks to these features, the Super High Risk gloves are best suited for laboratory, pharmaceutical industry, emergency services, hospital, nursing, food industry and industry. They are the top seller among chemical gloves at Franz Mensch and have proven themselves for over 15 years. The properties of the chemical protective gloves Super High Risk at a glance: strong nitrile, very robust and tight powder-free, no contamination of samples or food by the powder non-slip thanks to textured surface 30 cm long, protection beyond the wrist very robust, durable good sense of touch, suitable for fine work flexible and elastic for a very good fit food safe with rolled edge that catches run-off drops latex free left-right portable

Chemical protection gloves Professional made of nitrile by Hygostar The nitrile glove Professional is a full chemical protection glove that offers its wearer a particularly high level of protection against biological dangers and chemicals. A cotton flocking on the inside of the glove ensures that it is quicker and easier to slip on, making it easier to put on. However, the protective glove not only impresses with its high wearing comfort, but its textured surface also provides a secure grip and a good sense of touch. Thanks to the extended cuff, the nitrile protective glove provides additional protection against liquid splashes, for example. Due to its durable property, it is suitable for medium risks in mechanical and industrial work and is therefore the ideal protective glove to be used in industry, the pharmaceutical industry, the food industry or in the laboratory. Our tip: Make sure you also have soft cotton gloves to wear underneath. They reduce sweating and offer even more wearing comfort. The features of the chemical protection gloves Professional at a glance: made of nitrile, durable and abrasion-resistant high wearing comfort due to its cotton flocking inside very secure grip thanks to structured surface protect against biological dangers and chemicals extended cuff for extended protection free of latex-allergy causing proteins

Chemical protective glove TRIPLEX The TRIPLEX chemical resistant glove has been triple-dipped in latex and is therefore extremely robust. With a material thickness of 0.7 mm, it is very tight against liquids and can withstand even strong mechanical stress very well. Thanks to the triple latex coating, the TRIPLEX is the ideal protective glove for work in the chemical cleaning, construction and agriculture. As a chemical protection glove it offers reliable protection against chemicals and solvents - certified according to EN 374-2 and EN374-3. Advantages of the chemical protection glove Triplex at a glance: High quality latex: triple dipped in latex, extremely resistant Protection against mechanical risks: tested to EN 388 Extended protection: by a length of 33 cm, for protection of the forearm High wearing comfort: thanks to cotton flocking inside the glove, less sweating and improved moisture absorption Very handy: thanks to structured palms and fingers, even on slippery surfaces Chemical-resistant: Protection against various acids and bases

Cold protection gloves Wet Protect Winter with latex coating The cold protection gloves Wet Protect Winter are made of a high-quality nylon fine knit with knitted cuff. Thanks to their moisture repellent latex full coating and their warming polyacrylic lining, they are suitable for wet as well as cold working conditions. This includes, for example, activities in agriculture and forestry, horticulture, crafts, construction industry, engineering, locksmithery and workshops, waste management or installation work. Here, the gloves are designed for medium risks. In addition, the sandy 1/4 latex coating of the gloves on the palm, the thumb and the fingertips ensures a very good dry and wet grip. The features of the cold protection gloves Wet Protect Winter at a glance: Latex full coating repels moisture warming inner lining made of polyacrylic suitable for activities in damp, cold environment for medium risks in mechanical and industrial work non-slip texture

Cold protection gloves Cold Protect, HBT® vinyl coating The Cold Protect is comfortable and has a good fit, thanks to the polyamide fine knit. In addition, it has an anti-vibration effect whereby the damping property benefits the wearer.  An HPT® vinyl coating (Hydropellend Technology®) on the palm and 3/4 of the back of the hand ensures the resistant to oil and grease as well as a good grip. It is preferably used for medium risks in mechanical and industrial work in the field of construction industry, locksmithery, waste management, agriculture and forestry, horticulture. Especially in cold working conditions, the Cold Protect can be used without hesitation, because it has a warming acrylic lining. Properties of the cold protection gloves Cold Protect at a glance: HPT vinyl coating anti-vibration effect fluffy, warm acrylic lining oil and grease resistant, abrasion resistant for medium risks in mechanical and industrial work, especially under cold conditions

Cut protection gloves Cut Safe 3/4-coating with PU coating by Hygostar The cut protection glove Cut Safe is characterized by its PU coating on the palm and its back side of the hand, which is also 3/4 PU coated. Its carrier material consists of a High Pressure Polyethylene fine knit, which is especially suitable for cut protection. Thanks to the coating and the dense knitting, the glove is very abrasion-resistant and ensures a good dry grip. In addition, it is breathable and thus convinces with a good wearing comfort. Since the Cut Safe glove has the cut-resistance level F, it is applicable for medium risks in mechanical and industrial work with sharp objects. Thus, it is mainly used in the metal and glass industry as well as in the production of automobiles and electronic devices. The features of the cut protection gloves Cut Safe 3/4-coating at a glance: HPPE fine knit with dense knitting, glass fibre PU-coated palm and 3/4 coated back side good grip on dry objects very abrasion-resistant with cut-resistance level F good wearing comfort for medium risk mechanical and industrial work with sharp objects

Cut protection gloves Cut Allfood Glass Sensitive from HygostarThe cut protection glove "Cut Allfood Glass Sensitive" is made of a particularly tightly knitted special fabric.The "Cut Allfood Glass Sensitive" has a very good cut resistance (cut protection class 5). It is light and highly flexible. Its cuff is extra extended for more safety. The cut protection glove has unsurpassed tactile properties and is therefore also especially suitable for the knife-wielding hand. It is washable at up to 95°C and can be worn on both hands.The blue colour makes the glove particularly suitable for food production, as it ensures better recognition within the production chain

Fine knit gloves Black Ace with PU coating from HygostarBlack Ace coated fine knit gloves are the best-selling work gloves for crafts, repairs, assembly work, industry, warehouse and horticulture. As reliable CAT2 gloves, they protect against medium risks during mechanical and industrial work. They are tested and approved in accordance with the requirements of the PPE Directive. The PU coating on the palm and palm makes the work gloves particularly abrasion-resistant and resilient. This type of coating is called 1/4-coating, because in terms of surface area, around 1/4 of the upper side is coated.The base material of the Black Ace fine knit gloves is made of nylon. This material is very stretchy and provides a very good fit. The better the work glove fits, the more sensitivity and precision are possible. Nylon fine knit is also permeable to air and allows the skin to breathe. Therefore, these assembly gloves are very comfortable to wear even during longer work.The features of the fine knit gloves Black Ace at a glance:light and comfortable to wearpalm and fingertips PU coatedabrasion resistant and robustsnug fit thanks to stretchy nylon fine knitwith soft knitted cuff at the end of the armsair permeable material, allows the skin to breatheVery good drying gripversatilepersonal protective equipment (PPE) of category "CAT 2", for medium risksMore Black AceThe Black Ace fine knit gloves from Hygostar are available in three variants with different types of coating:3/4 PU coating: Palm and 3/4 of the back of the hand coated, more protection and coverage than with a ¼-coatingBlack Ace Touch: Palm and fingertips PU-coated (1/4) and additional carbon coating on the fingertips for operating capacitive touchscreensWhy PU coated?PU is very durable and yet lightweight. PU coating does not weigh down the glove and allows a secure grip. Especially when working with dry objects on construction sites or in industry, the PU-coated gloves are very suitable.

Fine knit glove Black Ace Touch with PU coating from HygostarThis work glove with touch function makes your everyday work noticeably easier. Thanks to a special carbon coating, you can easily operate smartphones, tablets and all other capacitive screens. Save yourself the hassle of putting on and taking off your assembly gloves and work without interruptions. The tips of the thumb, index finger and middle finger are carbon coated and thus enable the operation of touchscreens.Why touchscreen-enabled work gloves?Touchscreens do not work with normal work gloves. So that the gloves do not have to be taken off separately, Franz Mensch offers special touchscreen gloves for professionals. They are equipped with conductive carbon on the fingertips and thus enable the operation of capacitive screens. In addition, these gloves are approved as PPE and meet legal standards. This means your work processes run more quickly and the protective function of the gloves remains at all times because they can simply be left on.The Black Ace Touch in detailThe fine knit glove Black Ace Touch is made of elastic nylon fibers and is therefore very precise fit. It fits well on the hand and offers a high degree of dexterity and mobility. The air-permeable 1/4 PU coating on the palm as well as on the fingertips makes the work glove very abrasion-resistant, hard-wearing and resistant to mechanical stress. As a tested CAT2 protective glove, it is suitable for medium risks in mechanical and industrial work and offers a safe dry grip.Features of the fine knit glove Black Ace Touch at a glance:Carrier material made of high quality nylon fine knit with 13 gauge1/4 PU coating on hand and fingersabrasion resistant and robustbreathable back of the hand3 fingers coated with carbon for touchscreenssuitable for all touch sensitive screens, touchscreens, tablets and smartphonessoft knitted waistband for high wearing comfortprecise fit for very good tactile sensitivityGood drying gripfor medium risk mechanical and industrial work in dry environmentsMore Black AceBlack Ace is a range of fine knit gloves from Hygostar and is available in three variants:1/4 PU coating: classic work glove, palm and fingertips are coated, free back of the hand3/4 PU coating: palm and 3/4 of the back of the hand coated, more protection and coverage than with a ¼ coatingWhy PU coated?PU is very durable and yet lightweight. PU coating does not weigh down the glove and allows a secure grip. Especially when working with dry objects on construction sites or in industry, the PU coated gloves are very suitable.How touchscreen gloves work?Touchscreens are touch-sensitive screens - also called capacitive screens in technical jargon. They are usually operated with bare fingers and are very common in smartphones or tablets. Capacitive technology works via detectors located underneath the display. These detectors detect the touch of your finger using electrical conductivity. Since most gloves are made of non-conductive, insulating materials, this does not work. The touches are not detected. To prevent this problem and avoid taking off the glove, there are special touchscreen gloves. Here, conductive carbon is sewn into the fingertips. In this way, conductivity is established and you operate touchscreens with your hand as usual.

Fine knit gloves Allfood Nitril, nitrile coating by Hygostar The Allfood Nitril fine knit glove has a liquid-repellent full nitrile coating and a 1/4 nitrile foam coating on the fingertips as well as on the palm. This provides a good wet and dry grip as well as a strong abrasion-resistance. The work glove is food safe and has a very good fit. The Allfood Nitril is ideal for medium risks in mechanical and industrial work in the food industry and gastronomy. The features of the Allfood Nitril fine knit glove at a glance: 15 gauge food safe and very abrasion-resistant good dry and wet grip comfortable and ideal fit especially suitable for medium risks in mechanical and industrial work

Fine knit gloves Skill with latex coating from Hygostar The fine knit glove skill is made of abrasion-resistant nylon fine knit as well as a crinkle 1/4 latex coating. Thanks to the coating on the fingers and palm, the work glove is very robust and has an excellent wet and dry grip. The Skill offers a high wearing comfort as well as an excellent fit. It is particularly suitable for medium risks in mechanical and industrial work in the field of packaging sector, warehouse and for installation work. The properties of the fine knit gloves Skill at a glance: 15 gauge, durable, elastic 1/4 latex coating on palm and fingertips excellent dry and wet grip very good tactile sensitivity ideal for medium risks in mechanical and industrial work

Cold protection gloves Wet Protect Winter with latex coating The cold protection gloves Wet Protect Winter are made of a high-quality nylon fine knit with knitted cuff. Thanks to their moisture repellent latex full coating and their warming polyacrylic lining, they are suitable for wet as well as cold working conditions. This includes, for example, activities in agriculture and forestry, horticulture, crafts, construction industry, engineering, locksmithery and workshops, waste management or installation work. Here, the gloves are designed for medium risks. In addition, the sandy 1/4 latex coating of the gloves on the palm, the thumb and the fingertips ensures a very good dry and wet grip. The features of the cold protection gloves Wet Protect Winter at a glance: Latex full coating repels moisture warming inner lining made of polyacrylic suitable for activities in damp, cold environment for medium risks in mechanical and industrial work non-slip texture

Cotton gloves Nero by Hygostar The cotton gloves Nero are intensely black and immediately stand out due to their beautiful appearance. They are blacker and of a higher quality than comparable black cotton gloves. The Nero gloves are therefore often worn as dark work gloves in industry, workshops and logistics. But the medium-weight fabric gloves are also very suitable for work in the catering industry or for wearing under cleaning gloves.  Why black work gloves? Especially in hygiene areas and bright environments, black gloves offer a more pleasant contrast for the eyes. Your eyes are relieved and you work more comfortably especially in fine work that requires a lot of concentration. In addition, the black colour is less sensitive to dirt.  The features of the cotton gloves Nero at a glance: Deep black, blacker than comparable gloves layered fingers, inserted thumb for very good fit soft, with very good tactile sensitivity high quality cotton blend, medium weight for low risk light mechanical work ideal in dry and clean areas What exactly are Schichtel? Schichtel are the side inserts on the fingers and give the glove a high level of fitting accuracy. The aim is to precisely match the anatomical shape of the hand so that the glove fits very well at all times. Only very high-quality gloves have layered fingers. The thumb of the gloves is inserted separately and also supports the anatomical fit.

Cotton gloves Blanc from Hygostar With their bright white colour, precise fit and high quality, the Blanc cotton gloves have been impressing our customers from a wide range of industries for several years. The medium-weight cotton gloves have a particularly fine and high-quality finish. The layered fingers and the inserted thumb ensure an anatomically exact fit, which is why the gloves fit perfectly and adapt very well to your hand movements. The Blanc cotton gloves are made from a blend of cotton and polyester. This combination combines the advantages of both materials: soft, durable cotton together with stretchy polyester. The Blanc fabric gloves are among Franz Mensch's top sellers. The features of the cotton gloves Blanc at a glance: made of cotton blend, medium weight version high quality and fine precise fit with layered fingers and inserted thumb very good tactile sensitivity extra white, bleached versatile ideal for low risk light mechanical work in dry and clean areas Even more from the Blanc range Cotton gloves Blanc Extra Long: extra long cotton gloves, 35 cm long Cotton gloves Blanc Doubled: robust cotton gloves with reinforced fingers and palm Cotton gloves Blanc | packed in pairs Cotton gloves Cotton Detect | detectable: for the food industry Cotton gloves Blanc Light: seamless, extra thin - ideal for underwear What exactly are Schichtel? Schichtel are the side inserts on the fingers and give the glove a high accuracy of fit. The aim is to precisely match the anatomical shape of the hand so that the glove fits very well at all times. Only very high quality crafted gloves have layered fingers. The thumb of the gloves is inserted separately and also supports the anatomical fit.