Mop systems

Complement your cleaning equipment with these mop covers and mop holders. At Franz Mensch you will find a wide range of materials and sizes to meet your cleaning requirements - ideal for hygienic areas in industry, kitchens, commerce and food production.

Sorting:

Mop made of polyester/microfiber, preview image

Mop | polyester/microfiber

Mop made of polyester/microfiber by Hygoclean The polyester microfibre mop is suitable for damp and wet cleaning of various surfaces. Due to the use of high-quality microfibres, dirt and dust particles are effectively picked up and held without leaving any residue. However, the advantage of a polyester microfibre mop is not only the cleaning performance, but also the hygiene, as the mop is washable at 90 °C. Cross-contamination can be effectively prevented by the different colours. A colour code, using a different colour for each surface, helps to ensure optimum hygiene and prevent the spread of bacteria and germs. Properties of mop at a glance: material: polyester microfibre the mop can be washed at 90 °C avoidance of cross-contamination due to colour variations suitable for cleaning methods: damp cleaning wet cleaning

Colour

Mop with bristle strips made of polyester/microfiber, variants

Mop with bristle strips | polyester/microfiber

Mop with bristle strips made of polyester/microfiber by Hygoclean This white-grey mop is extremely effective for use in damp or wet cleaning. Its bristle strips ensure thorough cleaning of grout and problematic surfaces. The bristle strips are designed to effectively remove even stubborn dirt. Thanks to its washability at high temperatures of up to 90°C, the mop is hygienic and can be used again and again. This makes it a particularly environmentally friendly and sustainable cleaning product. The mop makes cleaning easy, even of hard-to-reach places. Equipped with the right features, it is the perfect choice for thorough and reliable cleaning. Properties of mop at a glance: bristle strip included material: polyester/polyamide bristle strips ensure joint cleaning can be washed for two types of cleaning

Colour

Vermop Ceran, glove mop

Glove mop Ceran from Vermop The glove mop Ceran is made of microfiber and is characterized by a high dirt holding capacity. Thanks to the electrostatic charge of the fiber, cleaning without dust whirling is possible. The Ceran glove mop is ideal for quick and thorough dry cleaning, as it does not germinate when used without water. In addition, the mop can be washed at 95°C and is suitable for different hand sizes. The features of the glove mop Ceran at a glance: made of microfiber with electrostatic charge high dirt holding capacity cleans without raising dust does not get germinate when used without water can be washed at 95°C

Packaging unit

Box Package

Vikan Pad Holder Hand Model

Vikan Pad Holder Hand ModelAttach the TV5523, TV5524 and TV5525 cleaning pads to this sturdy, durable and lockable pad holder using the stainless steel hooks. Ideal for cleaning exterior furnishing surfaces and walls.Features of the Vikan Pad Holder Hand Model at a glance:Material: polypropylene, stainless steel, nylon

Colour

Vermop Sprint Progressive, mop

Mop Sprint Progressive from Vermop The mop Sprint Progressive is made of a polyester microfiber plush. It is characterized by high dirt retention, which makes it ideal for daily wet and damp cleaning of floors. After cleaning tasks, the mop washes out well. The Sprint Progressive is available in different colours. Thus, it offers the possibility to separate different cleaning areas and avoid cross-contamination. Tip: Wash the Sprint Progressive mop at 95°C, even for coarse soiling. For more information, use Vermop's washing recommendation to achieve best cleaning results. The features of the mop Sprint Progressive at a glance: made of polyester microfiber plush binds dirt very well can be washed out well wash at 95°C, even with coarse dirt separation of colours to avoid cross-contamination

Colour

Vermop Sprint V, holder

Holder Sprint V from Vermop The holder Sprint V from Vermop is the ideal mop holder for professional cleaning in all sectors, as it is extremely maneuverable and runs easily. It is made of plastic and can be combined with textiles from Vermop. Due to its V-shape it can be easily inserted into the mop pockets. Thanks to a hand button, the mop can be dropped in an upright position, which is easy on the back of its wearer. So that the mop holder can absorb dirt particularly well, it has an optimal contact surface. The features of the holder Sprint V at a glance: made of plastic with hand button for mop dropping in upright position easy insertion into mop pocket due to V-shape thanks to optimized support especially good dirt collection maneuverable and easy-running

Packaging unit

Box Package

Vikan pad holder, floor model, 230 mm, blue as portrait

Vikan Pad Holder, 230 mm

Vikan Pad Holder, 230 mmAttach the TV5523, TV5524 and TV5525 cleaning pads to this solid, durable and lockable pad holder using the stainless steel hooks. It is equipped with a rotating neck that allows cleaning under equipment up to a minimum height of 12 cm above the floor. It can be used with any Vikan handle and allows users to safely clean floors and walls under equipment and the outside of tanks/containers.Features of the Vikan Pad Holder, 230 mm at a glance:Material: polypropylene, stainless steel, nylon

Colour

Vermop Sprint Brush Progressive, mop

Mop Sprint Brush Progressive from Vermop With the mop Sprint Brush Progressive it is possible to clean thoroughly even in joints because of its bristle strips made of a polyester blended fabric. Due to the good dirt dissolution and dirt absorption, it can be used for wet and damp cleaning of textured and rough floors. Ideally, it washes out well after the cleaning work. Tip: The mop Sprint Brush Progressive is washable at 95°C. For more information, use Vermop's washing recommendation to get optimal cleaning results. The features of the mop Sprint Brush Progressive at a glance: with bristle strips for thorough cleaning in joints good washability absorbs dirt well can be washed at 95°C suitable for cleaning rough and textured floors

Colour

Vermop Sprint Brush, mop

Mop Sprint Brush from Vermop The mop Sprint Brush made of microfiber is equipped with bristle strips made of polyester, which ensure thorough cleaning even in joints. It is characterized by excellent dirt dissolution as well as dirt absorption, which is why it is mainly used for wet cleaning of highly structured and rough floor coverings. Thanks to its good sliding behavior on safety tiles, it is suitable for use in sanitary or bathroom areas. Also, the Sprint Brush is immediately ready for cleaning, as it is already washed. Tip: Wash the Sprint Brush at 95°C. For more information, use Vermop's washing recommendation to achieve optimal cleaning results. The features of the mop Sprint Brush at a glance: made of microfiber thanks to bristle strips thorough cleaning in joints excellent dirt dissolution and absorption already washed for immediate use

Packaging unit

Box Package

Vermop Sprint Tronic Light, mop

Mop Sprint Tronic light from Vermop The Mop Sprint Tronic light is ideal for damp and wet cleaning, as it has a high water absorption capacity. Consisting of a polyester-cotton blend combined with microfiber, the mop absorbs hair very well thanks to its structure. For optimal dirt loosening, it is tufted with loops. So that the Sprint Tronic light can be used immediately by its user, it is already pre-washed. Tip: The mop is washable at 95°C. For more information, use Vermop's washing recommendation to achieve the best cleaning result. The features of the mop Sprint Tronic light at a glance: polyester-cotton blend combined with microfiber structure for very good absorption of hair already ready for use, because pre-washed tufted loops for optimal dirt removal high water absorption

Packaging unit

Box Package

Vermop Sprint Plus, holder

Holder Sprint Plus from Vermop The holder Sprint Plus from Vermop shows a high quality mop holder, which is made of plastic. Thanks to a step button he can be used without touching, making it particularly hygienic. So that the holder can achieve a high level of cleanliness, it is equipped with a double joint on the side, which makes it extremely mobile. Thus, the holder Sprint Plus from Vermop is best suited for heavy dirt accumulation in schools, offices and industrial objects. The features of the Sprint Plus holder at a glance: high quality plastic mop holder touchless application due to kick button very hygienic especially mobile thanks to double joint on the side for heavy soiling

Packaging unit

Box Package

Vermop Brush, glove mop

Glove mop Brush from Vermop The glove mop Brush is made of microfiber, which is why it ensures excellent dirt dissolution and absorption. Its bristle strips are made of polyester and allow thorough cleaning even in joints. In addition, the glove mop shows a good gliding behavior on safety tiles. It can be washed at 95°C. Since the Brush glove mop is already washed, it can be used immediately for wet cleaning of highly structured and rough coverings. The features of the glove mop Brush at a glance: made of microfiber with polyester bristle strips bristle strips for thorough cleaning in joints already washed for immediate use excellent dirt dissolution and absorption glides well on safety tiles

Packaging unit

Box Package

Vermop Scandic-Mono, holder

Holder Scandic-Mono from Vermop The holder Scandic-Mono from Vermop is characterized by its velcro mop concept, which makes it uncomplicated. Through this Velcro principle, the mop can be easily removed and changed. Also, ergonomic work is possible due to its low holder weight. Thanks to the double joint attached to the side, mop holder grants strong mobility. Especially for wet, damp and dry cleaning, the holder Scandic-Mono achieves optimal cleaning results. The features of the holder Scandic-Mono at a glance: uncomplicated thanks to velcro principle easy mounting and changing of the mops ergonomic work possible due to light holder very mobile thanks to lateral double joint

Packaging unit

Box Package

Vikan Pad, 245 mm, medium

Vikan Pad, 245 mm, mediumAttach the TV5523, TV5524 and TV5525 cleaning pads to this solid, durable and lockable pad holder using the stainless steel hooks. It is equipped with a rotating neck that allows cleaning under equipment up to a minimum height of 12 cm above the floor. It can be used with any Vikan handle and allows users to safely clean floors and walls under equipment and the outside of tanks/containers.Features of the Vikan pad, 245 mm, medium at a glance:Material: polypropylene, stainless steel, nylon

Colour

Vermop Sprint White Magic, mop

Mop Sprint White Magic from Vermop The Mop Sprint White Magic is made entirely of microfiber, which gives it a very good dirt dissolution. Thanks to its high water absorption as well as dirt absorption, it is ideally suited for damp and wet cleaning with a high level of protection. It also exhibits very good squeezing behavior. The additional cover sheet serves as a liquid depot. The mop Sprint White Magic is ready for use immediately, as it is pre-washed. Tip: You can wash the mop at 95°C. For more information, use Vermop's washing recommendation to achieve optimal cleaning results. The features of the mop Sprint White Magic at a glance: thanks to 100% microfiber very good dirt dissolving extra cover sheet as liquid depot can be squeezed out well absorbs water and dirt well ready for use by pre-washing

Colour

Vikan Pad, 245 mm, hard

Vikan Pad, 245 mm, hardThis hard scouring pad can be used to remove stubborn dirt from walls and floors. It fits all Vikan pad holders (hand and floor models). The pad is not FDA-compliant.Features of the Vikan pad, 245 mm, hard at a glance:Hardness burr: hardMaterial: 100% polyester (microfiber)

Colour

Vermop element mop holder

Element mop holder from Vermop The element mop holder in combination with a handle is suitable for dry as well as wet and damp cleaning. It is flexible and bendable, which allows it to be used in hard to reach places. It is made of plastic and has stainless steel support brackets. In addition, it can be equipped with different covers. The features of the element mop holder at a glance: made of plastic with stainless steel support bracket for attaching to a handle can be combined with different covers for hard to reach places due to flexibility and bendability

Packaging unit

Box Package

Vermop Sprint Tronic, mop

Mop Sprint Tronic from Vermop The mop Sprint Tronic shows a high-end mop made of high quality materials. For optimal dirt dissolution are the materials cotton and polyester combined with microfiber. Since it has an optimal water absorption, is ideal for wet and damp cleaning. In addition, the mop absorbs hair very well in the process. The Sprint Tronic is also ready for immediate use, as it is already pre-washed. It proves itself as an all-rounder for various areas of use. Tip: Wash the Sprint Tronic at 95°C. For more information, use Vermop's washing recommendation to achieve the best cleaning results. The features of the mop Sprint Tronic at a glance: made of cotton, polyester combined with microfiber optimal dirt dissolving and water absorption very good absorption of hair since pre-washed, immediate use possible

Packaging unit

Box Package

Vermop Scandic Mono Ceran, mop

Mop Scandic Mono Ceran from Vermop The Scandic Mono Ceran is a mop consisting of microfiber with a high dirt holding capacity. Due to the electrostatic charge of the fiber, cleaning takes place without dust whirling up. Thanks to the velcro principle, the user can easily put on or change the mop. Ideally, the Scandic Mono Ceran is already pre-washed and thus ready for immediate use. This mop is particularly suitable for dry cleaning and for interval or preliminary cleaning. Tip: Wash the mop at 95°C. For more information, use Vermop's washing recommendation to achieve the best cleaning results. The features of the mop Scandic Mono Ceran at a glance: made of microfiber velcro concept for easy mounting and changing no dust whirling up thanks to electrostatic charge high dirt absorption since pre-washed, immediately ready for use

Packaging unit

Box Package

Vermop White Magic / Blue, glove mop

Glove mop White Magic / Blue von Vermop The glove mop White Magic / Blue is characterized by its two different color sides with double effect. The blue side ensures that mechanically adhering dirt comes off. Thanks to the high quality microfiber, the white side then removes the loosened dirt. Thus, the White / Blue Magic Glove Mop can be optimally used for wet & damp cleaning, especially on structured surfaces. So that the user can start cleaning immediately, it is supplied already washed. The features of the glove mop White Magic / Blue at a glance: pages with double action blue for loosening of mechanically adhering dirt white to remove loosened dirt can be washed at 95°C already pre-washed

Packaging unit

Box Package

Vermop cover Ceran for element mop holder

Cover Ceran for element mop holder from Vermop The cover Ceran is made of microfiber and is specially made for the element mop holder from Vermop. Together with the holder and a handle can dry clean hard to reach places on ceilings and walls. At the same time, it cleans without dust whirling thanks to the electrostatic charge of the fiber. Particularly convincing is its high dirt absorption. The features of the cover Ceran for element mop holder at a glance: primarily for the element mop holder due to electrostatic charging of microfiber no dust whirling up does not germinate without water absorbs dirt very well

Packaging unit

Box Package

Haug Bürsten, abrasive mop

Abrasive mop from Haug BürstenThe precision-fit abrasive mop for folding holders with a working width of 400 mm is the ideal solution for thoroughly cleaning coarse soiling on slightly rough and structured surfaces. In addition, it is washable up to 95° to ensure hygienic cleaning.The features of the abrasive mop at a glance:suitable for folding holders with a working width of 400mmfor coarse soilingsuitable for slightly rough and structured surfaceswashable up to 95

Colour

Vermop element mop holder Des, set

Element mop holder Des, set from Vermop The element mop holder Des, set is made of plastic and has a microfiber cover. It can be used especially for hard to reach places, because it is flexible and bendable. The mop holder is already washed, which is why it is immediately ready for use. After the cleaning process, it can be easily disinfected and thus proves to be extremely hygienic. Ceilings and walls can also be cleaned with the element mop holder Des, set from Vermop. The features of the element mop holder Des, set at a glance: made of plastic with microfiber cover disinfectable for special hygiene immediately ready for use, since prewashed for hard to reach places thanks to flexibility and bendability

Colour

Vikan Pad, 245 mm, soft

Vikan Pad, 245 mm, softThe soft pad is ideal for removing greasy soiling from smooth surfaces such as PVC walls and stainless steel surfaces. It is not FDA compliant.Features of the Vikan pad, 245 mm, soft at a glance:Hardness: softMaterial: 100% polyester (microfiber)

Colour

The best mops for sparkling clean results

The mop, often also known as a mop, is an indispensable tool in professional cleaning. The flexible and absorbent mop covers pick up dirt and liquids - for clean and hygienic surfaces. Whether in commercial cleaning, in industry or in the catering sector, a mop makes cleaning work much easier and contributes to a neat appearance.

Franz Mensch understands the requirements and needs of commercial customers in the commercial cleaning, industrial, catering and medical sectors. That is why we offer you a wide range of high-quality mop systems. Both the covers and the mop holders are durable and made from hard-wearing materials. They offer optimum cleaning performance on various floor coverings. Whether smooth surfaces or textured floors, our mop covers remove dirt and dust efficiently and ensure streak-free results. Thanks to the high suction power of the covers, picking up liquids is also child's play.

The robust construction ensures a long service life, and thanks to the simple replacement mechanism, you can change the mop covers quickly and easily.

Which mop is the best?

There are different mops that are suitable for different situations and requirements. Here are some factors you should consider when choosing a mop:

1. type of surface to be cleaned:

Smooth floors: Microfibre mops are particularly effective as they pick up dirt and dust well.
Textured or rough floors: A mop with a longer and more robust fibre structure is more effective here.

2. size of the area to be cleaned:

Smaller areas: A compact, lightweight mop that also reaches narrow corners is just right here.
Larger areas: A mop with a wider head and a longer handle makes work easier and saves a lot of time on large areas.

3. type of dirt:

Dry or loose dust: A mop with a static charge can pick up dust effectively.
Wet or greasy dirt: A mop with high absorbency and cleaning performance is useful here.

4. user-friendliness: A mop with an easy-to-change cover and good ergonomics ensures easy handling.

5. value for money: compare the cost with the expected life and performance of the mop.

How does a mop work?

A mop is a cleaning appliance that has been specially developed for cleaning surfaces. The way it works is simple and consists of a few steps:a few steps:a mop?

1. preparation:
First, the mop cover, which can be made of various materials such as microfibre, cotton or a mixture of both, is soaked in a bucket of cleaning solution. The mixture of water and detergent helps to loosen dirt and dust from the floor surfaces.

2. wring out:
Once the mop cover has absorbed enough liquid, it is wrung out to remove excess water. This can be done manually or with the help of a special wringing system integrated into the bucket. The aim is to get the mop damp but not dripping wet.

3. wipe:
The mop is then pulled onto a mop holder and moved evenly over the surface or floor. The movement of the mop picks up the dirt and at the same time distributes the cleaning solution over the floor. With high-quality mop covers, the special structure or composition of the fibres ensures that dirt and dust are effectively picked up and retained.

4. rinse (if necessary):
For heavily soiled floors, it may be necessary to rinse the mop head occasionally or change the cover.

How do you mop with a mop?

The right wiping technique is important. It is best to work in strips: Run the mop across the floor in even, overlapping strips. Start in a corner of the room and work backwards towards the door to avoid stepping on the already cleaned surfaces.

Practical tips Mop:

Pay attention to the direction: On wooden floors, you should wipe in the direction of the grain to avoid scratches.
Do not scrub: Do not apply too much pressure to avoid damaging the floor. Instead, let the mop and cleaning agent do their work.

In our online shop, you will find a wide range of different sizes and designs so that the right mop cover and mop holder is available for every requirement. Whether for professional commercial cleaning, for use in industry or in other commercial areas - our products are the right choice for you.