Face masks

A mouthguard is an integral part of hygiene clothing in medicine, food production or cleanrooms. To meet all requirements, a mouthguard must also completely cover the nose. Here in the shop you will find various medical masks (EN 14683) or lightweight disposable masks - also available with comfortable headbands.

Sorting:

Mouthguard type II, 3-ply made of PP the different variants

Face masks type II, 3-ply | PP

Face masks type II, 3-ply made of PP from HygostarThis medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.

Colour

top seller

Face masks type IIR, 3-ply made of PP in blue in the front view

Face masks type IIR, 3-ply | PP

Face masks type IIR, 3-ply made of PP by Hygostar The face mask type IIR is a surgical mask with an excellent filter performance of 98% BFE. The "R" in the designation indicates that the face mask offers additional splash protection, for example against contaminated liquids such as blood. The face mask therefore fulfils all requirements for medical use - also suitable for operating theatres. The face mask type IIR is 3-layered and made of high-quality PP fleece. The material is soft and comfortable to wear. Advantages of the face mask type IIR, 3-ply at a glance: Particularly high quality, splash protection against contaminated liquids Proven filter performance of 98 % BFE as external protection against droplet infections 3-ply, high-quality PP material latex-free ear loops Integrated nose clip for a good fit For single use only

Colour

Face masks Civil Use, 3-ply made of PP in blue in the front view

Face masks Civil Use, 3-ply | PP

Face masks Civil Use, 3-ply made of PP by Hygostar The Civil Use face mask is made of 3-layer PP fleece and has a high-quality finish. The elastic ear loops and the malleable nose clip ensure a good fit. Civil Use masks cover the mouth and nose. In this way, they retain droplets that are spread when breathing and speaking. The Civil Use 3-layer face mask is therefore suitable for hygienic areas such as the food industry. The masks protect the food from contamination. This face mask is not personal protective equipment and is not suitable for medical use. Special feature: The green mouthguard (art.no. 291471) is equipped with comfortable headbands and is therefore especially recommended for longer wearing times! Features of the face masks civil use, 3-ply at a glance: 3-layer mask made of high-quality PP fleece for single use to be worn with elastic bands behind the ear, latex-free art. 291471 with comfortable headbands malleable nose clip, individually adjustable mouth and nose covered as product protection, reduces contamination by droplets no PPE, not for medical use

Colour

Face masks type II, 3-ply made of PP with ties with all colours

Face masks type II, 3-ply | PP, ties

Face masks type II, 3-ply made of PP with ties by Hygostar The face mask type II is 3-layer and approved for medical use. The masks achieve an excellent filtering performance of 98% BFE. Thus, they are suitable as foreign protection in hospital, medical and nursing. The face mask covers the mouth and nose and protects against droplet infections. The masks are worn with tie straps. Simply tie at the desired length at the back of the head. Nice side effect: No pressure behind the ears and a comfortable wearing feeling over a long time. Features of the Face masks type II, 3-ply with ties at a glance: 3-layer medical mask made of PP fleece meets the "Type II" standard excellent filtering performance, 98 % BFE tie straps for tight fit, no pressure behind the ears malleable nosepiece, individually adjustable for single use for external protection in hospital and care areas, prevents droplet infection

Colour

Face masks Civil Use, 1-ply made of paper in white in the front view

Face masks Civil Use, 1-ply | paper

Face masks Civil Use, 1-ply made of paper by Hygonorm The Civil Use 1-ply face mask is made of tissue. Tissue is a lightweight, air-permeable paper and very comfortable to wear in everyday life. The Civil Use face mask is a very affordable face mask that hygienically covers the mouth and nose. The masks are ideal for cosmetic areas and beauty treatments. Features of the face masks Civil Use, 1-ply at a glance: 1-ply tissue material inexpensive and ideal for high consumption latex-free, soft ear loops very comfortable and easy to wear for single use

Colour

Face masks Civil Use, 3-ply | PP, economy pack

Face masks Civil Use, 3-ply made of PP by Hygostar The Civil Use face mask is made of 3-layer PP fleece and has a high-quality finish. The elastic ear loops and the malleable nose clip ensure a good fit. Civil Use masks cover the mouth and nose. In this way, they retain droplets that are spread when breathing and speaking. The Civil Use 3-layer face mask is therefore suitable for hygienic areas such as the food industry. The masks protect the food from contamination. This face mask is not personal protective equipment and is not suitable for medical use. Features of the face masks civil use, 3-ply at a glance: 3-layer mask made of high-quality PP fleece for single use to be worn with elastic bands behind the ear, latex-free malleable nose clip, individually adjustable mouth and nose covered as product protection, reduces contamination by droplets no PPE, not for medical use

Colour

economy pack

Face masks Civil Use, 2-ply made of PP in blue in the front view

Face masks Civil Use, 2-ply | PP

Face masks Civil Use, 2-ply made of PP by Hygostar The 2-ply Civil Use face mask is made of soft PP fleece. It is comfortable to wear and provides hygienic coverage for the mouth and nose. The latex-free ear loops are elastic and ensure a good fit. The Civil Use face mask is also equipped with a nose clip to adjust the fit individually. The masks are especially worn in the food industry to protect food from droplet contamination. A Civil Use face mask is versatile in areas where a face mask is required by law. Features of the face masks Civil Use, 2-ply at a glance: 2-layer PP fleece air-permeable with stretchable ear loops, latex-free anatomically adjustable with integrated nose clip for single use covers mouth and nose prevents contamination by droplets

Colour

Mouthguard type II, 3-ply from PP in the front view in blue

Face masks type II, 3-ply | PP, economy pack

Face masks type II, 3-ply made of PP from Hygostar This medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer. The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity. Hygiene with colour system: surgical mask and mouthguard also in black or pink The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications. Advantages of the face masks type II, 3-ply at a glance: 3-layer, soft PP fleece filter performance of 98 % BFE can be worn behind the ear with elastic bands, latex-free integrated nose clip, anatomically formable for a good fit for single use for external protection (protection against droplet infection) in the hospital and care sector pharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces) Suitable wall holder for mouthguard boxes: art.-no. 88934: Stainless steel mouth guard dispenser What is a medical face mask type II? Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission. Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE): Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids. Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air. Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.

Colour

economy pack

Face Mask Type IIR | PP (Made in Germany)

Face Mask Type IIR | PP (Made in Germany) by Hygostar The face mask type IIR is made of polypropylene fleece. As this face mask absorbs liquid splashes and has a higher resistance against aerosols, it is perfectly suited for operating rooms, for example. Due to the integrated nose clip and the skin-friendly material, it is very comfortable to wear. It also has a filter performance of ≥ 98% BFE and is non-sterile. Properties of the face mask: polypropylene nonwoven ideal for the medical sector with nose clip resistant against aerosols and liquid splashes non sterile and skin-friendly

Colour

Face masks type II, 3-ply made of PP individually packed in blue in the front view

Face masks type II, 3-ply | PP, individually packed

Face masks type II, 3-ply made of PP, individually packed by Hygostar The 3-ply face mask type II is individually packed in a bag. It is therefore particularly suitable for handing out to employees or visitors. The masks are handled by the wearer's hands only - very clean and hygienic. The face mask type II has an excellent filtering performance of 98% BFE and is approved for use in the medical field. The face masks are used as foreign body protection in hospital and nursing care. They protect against so-called droplet infections. Features of the face masks type II, individually packed at a glance: hygienic single packs 98 % BFE, excellent filter performance high-quality PP fleece 3 layers tight fit thanks to elastic ear loops adjustable nose clip for a good hold of the mask for single use

Colour

Face Mask Civil Use | PP (Made in Germany)

Face Mask Civil Use | PP (Made in Germany) by Hygostar The face mask "Civil Use" (Made in Germany) is exclusively produced and developed in Germany and consists of a polypropylene fleece. It has three layers and is very skin-friendly and lint-free thanks to this PP material. Optically it has white elastic bands, which are extra soft and padded. In addition, an integrated nose clip ensures an extremely comfortable fit. The face mask "Civil Use" made of PP is non-sterile, which is why it was not made for medical purposes, but for private use. This face mask should not be reused after use to ensure safety. Properties of the Face Mask Civil Use made of PP (Made in Germany): skin-friendly PP material, lint-free 3-ply made in Germany with white ear loops and integrated nose clip non-sterile: for private use cannot be used again comfortable to wear

Colour

Face masks Civil Use, 2-ply made of paper in white in the front view

Face masks Civil Use, 2-ply | paper

Face masks Civil Use, 2-ply made of paper by Hygostar The 2-ply Civil Use face mask is especially recommended for hygienic applications in cosmetic and beauty areas. The lightweight face masks are made of 2-ply tissue paper. This paper is very soft, light and therefore comfortable to wear. The Civil Use face mask is worn with elastic ear loops, which are of course latex-free. These masks are a favourable option to cover the mouth and nose hygienically, and due to the price advantage ideal for very high consumption. Features of the face masks Civil Use, 2-ply at a glance: made of 2-ply paper, light tissue material soft ear loops, latex-free for single use for covering mouth and nose very comfortable to wear Tip for hygienic storage and removal: order matching dispenser

Colour

Mouthguard type II, 3-ply made of PP, headband in different colors

Face masks type II, 3-ply | PP, head band

Face masks type II, 3-ply made of PP with headband from HygostarThis disposable mask is worn with head straps and therefore offers optimum wearing comfort even during long periods of use. Your advantage: No pressure behind the ears as with comparable masks with ear loops. The elastic, latex-free rubber bands ensures a tight fit and good hold.The medical mouthguard is 3-ply and has an excellent filter performance of 98% BFE. It meets all the requirements of category "Type 2" and can be used as third-party protection in hospital and nursing. The mouthguard can therefore also be worn as a surgical mask and high-quality surgical face mask. The mouthguard type II with headgear is a disposable product and protects against droplet infections.Advantages of the face masks type II, 3-layer with headband at a glance:3-ply, nonwoven material made of high-quality PPfilter performance of 98 % BFE, corresponds to type IIwith elastic headband, no pressure behind the earsvery good fitanatomically adjustable nosebandoptimum comfort with long wearing timefor single useSuitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.Intended purposeFor third-party protection (protection against droplet infection) in the hospital and care sectorFunctional rangesuitable for medical use

Colour

very comfortable

Face masks, type II, 3-ply made of SMS, Made in Europe in the front view with disruptor

Face masks type II, 3-ply | SMS, Made in Europe

Face masks type II, 3-ply made of SMS - Made in Europe This face mask type II is manufactured in Europe and is ideal for all who value sustainability. "Made in Europe" stands for economical and resource-saving production with short transport routes within Europe. The face mask is made of high-quality SMS material with an effective filter layer. Thanks to its excellent filtering performance of 98% BFE, the face mask can be worn as a medical face mask in hospital and care settings. The latex-free, soft ear loops and the flexible nose clip ensure a good fit. Advantages of the face masks type II, 3-ply at a glance: more sustainable, because made in Europe 3-ply, with filter layer top filter performance of 98% BFE medical face mask tested as type II according to EN 14683 high quality, soft SMS material latex-free ear elastics integrated nose clip, adjustable for a good fit for single use

Colour

Face masks type IIR, 3-ply made of PP in green in the front view

Face masks type IIR, 3-ply | PP, economy pack

Colour

economy pack

Face mask from Franz Mensch

Hygienic face protection at a reasonable price

In the head and face protection section you will find a wide range of face masks such as beard protection, hygienic masks, surgical masks and face masks - ideal for dentists, hospitals, operating theaters, cosmetics, industry and food production.

Face masks - certified quality for highest infection protection

A face mask is an important part of hygiene clothing in sensitive areas such as medicine, food production or clean rooms. Because especially when exhaling and speaking, the smallest droplets are distributed to the environment and pathogens can spread easily. A face mask prevents this so-called droplet infection. A face mask is therefore worn most frequently in the medical sector, for example in hospitals, in surgery and in the operating theater. Here, infection protection and prevention have top priority.

To meet all hygiene requirements, a face mask must also completely cover the nose. The term mouth and nose protection or face mask would therefore be more appropriate. All face masks from Franz Mensch have moldable nose clips. This means that the face mask always fits tightly and offers a particularly good fit - without pressing or slipping.

In the medical field, the face mask is an integral part of reliable personnel and patient protection. Hygiene masks or surgical masks must comply with EN 14683. All 3-layer face masks that you can find here in our online store comply with EN 14683 and belong to the category Type II. The 3-layer face mask consists of two layers of PP fleece and a high-performance filter unit made of meltblown in between. In addition, the face mask complies with the MPG - Medical Device Class I and the Medical Device Directive 93/42 EEC. Important: A face mask is basically a disposable product and approved for single use only.

Latex-free rubber bands and particularly soft fleece materials are a matter of course at Franz Mensch. In this way, every face mask is particularly skin-friendly and comfortable.

The face mask assortment here in the online store:

Face masks with rubber bands: 3-ply, ideal as medical face mask and surgical mask, rubber bands are worn behind the ears, excellent filtering performance, low breathing resistance, lint-free, certified quality, available in many colors, either in a bag or in a box of 50.
Face mask with rubber bands over head: 3-ply, certified as surgical mask or surgical mask, rubber bands are worn on the back of the head, excellent filtering performance, lint-free
Face mask with tie straps: 3-ply, meets EN 14683 Type II performance requirement, ideal for hospital and OR, tie straps are tied at the back of the head and neck, excellent filtering performance
Face mask with activated carbon filter: filters unpleasant odors, hypoallergenic, very good filtering performance, protects against splashes and germs, skin-friendly PP fleece
Face mask with elastic bands: 2 layers of PP fleece, padded elastic bands, elastic bands are fastened behind the ears, light hygiene protection
Face mask made of tissue in one layer or face mask made of tissue in several layers: light face mask made of paper, very breathable and comfortable, ideal for cosmetic and wellness applications, very favorable hygiene protection