Astro caps Bild | viscose keyback

Astro caps made of PP by Hygostar The astro caps are made of very high quality and air-permeable PP fleece. Therefore, the hoods are pleasant and comfortable even when worn for long periods of time. Due to the latex-free elastic band at the face cutout, the astro caps are more skin-friendly and also food-safe, making them ideal as hygienic headgear for food industries and slaughterhouses. The astro caps can be combined with a mouth and nose cover for everyday work. If necessary, you can easily replace the mouth and nose cover without having to change the complete astro hood. This saves money and conserves resources. Features of the astro caps at a glance: air-permeable PP fleece, high quality with straps in the neck for fastening can be combined with a mouth and nose cover if required, flexible and easy to replace latex-free elastic band for less skin irritation  suitable for contact with food protection against low superficial mechanical risks

Astro caps with sweatband made of PP by Hygostar The astro caps are made of air-permeable PP fleece and have a sewn-in sweatband at the front. The sweatband absorbs moisture and increases the wearing comfort noticeably. Thus, the astro caps feel comfortable even when worn for long periods of time or in warm temperatures. The caps can be combined with a face mask as desired and can be easily fastened with straps at the neck. Your advantage: You can change the face mask flexibly without having to replace the entire hood. This saves you costs and conserves resources. Astro caps with sweatband are ideal for hospital, laboratory, nursing and all areas where hygiene is paramount.  Features of the astro caps with sweatband at a glance: air-permeable and high-quality PP material can be combined with a face maske, which can be changed flexibly fit and position can be adjusted with ties at the neck face cutout with latex-free elastic band for a good fit protection against low superficial mechanical risks

Astro caps micromesh made of nylon The special feature of these astro caps is the material: micromesh made of nylon is particularly air-permeable, soft and elasticated. The micromesh allows the head and skin to breathe. This means that the astro caps are always comfortable and pleasantly light, even when worn for long periods. In addition, the face cut-out is so flexible that you can wear the astro cap in three different ways: either with just the head covered and the face uncovered or pulled over the mouth or pulled over the mouth and nose at the same time so that only the eye area is uncovered. Micromesh astro caps are therefore ideal for hygienic areas in the food industry and slaughterhouses. Advantages of Micromesh nylon astro caps at a glance: high-quality, soft nylon air-permeable, fine micromesh for high wearing comfort latex-free, very soft and light texture prevents skin irritation and pressure Suitable for contact with food fulfils the highest demands

Astro caps with 2-ply face mask made of SMS from Hygostar These astro caps are made of very high-quality SMS material. The special feature: SMS is slightly water-repellent and comfortable to wear even for long periods. SMS consists of three layers: The outer and inner sides are made of soft, air-permeable PP fleece. In between is a meltblown layer. The astro caps also have a sewn-on 2-layer mouth-nose mask. This makes them a particularly hygienic head covering for food production, abattoirs and all hygiene areas where a mouth-nose cover is required by law. Feautures of Astro caps made of SMS with 2-ply face mask at a glance: air-permeable, slightly water-repellent SMS Sewn-on 2-layer mouth-nose cover, latex-free not a medical face mask, not an FFP respirator mouldable nose clip for a good fit high wearing comfort even when worn for long periods

Astro cap micromesh with cape made of nylon The astro caps Micromesh with cape are made of high-quality nylon. Thanks to the micromesh, the bonnets are very high quality and breathable. They consist of a combination of bonnet, mouth and beard cover. The cape also covers the neck up to the shoulders. The face cut-out can be adjusted to any size and is fastened with a latex-free elastic band. The astro caps also offer first-class wearing comfort, preventing marks and cuts. It is ideal for contact with food and protects against minor superficial mechanical risks. The properties of the Astro caps Micromesh with Cape at a glance: high-quality nylon material with micromesh Combination of bonnet, mouth and beard cover the cape also covers the shoulders Ideal for contact with food

Astro caps with cape made of PP from HygostarThe Astro caps with cape are a particularly hygienic headwear for butchers and other sensitive areas of food production. The great advantage: The astro bonnets cover large parts of the head and, thanks to the sewn-on cape, also the shoulders. This significantly minimises the risk of food contamination. At the same time, astro caps are very practical for your employees because they only have to put on one piece. 3 in 1: Astro caps with cape are a bonnet, face mask and beard cover all in one. The face cut-out is elastic thanks to an rubber band and can be worn in different ways depending on hygiene requirements. You can thus cover more or less of the face and also pull it over the nose, for example. The astro caps with cape are made of air-permeable, soft PP and are very comfortable to wear.Advantages of the PP astro caps with cape at a glance:with integrated cape as shoulder coverastro caps: maximum hygiene for food areascap, face mask and beard cover in oneair-permeable PP fleecelight and comfortableflexible face cut-out, latex-freesuitable for contact with foodprotection against minor superficial mechanical riskssuitable dispensers for astro bonnets available here: stainless steel dispenser art. 88939, bulk dispenser art. 88963, acrylic dispenser art. 8895 or double dispenser made of acrylic art. 88950

Beard cover made of nylon by Hygostar Nylon beard cover is a very high-quality hygiene garment. Nylon is finer, more elastic and therefore noticeably more comfortable than PP fleece. A nylon beard cover is especially recommended for long periods of wear. The material is soft and pleasant to the skin for a long time. Nylon beard cover is ideal in combination with a hood to cover hair in sensitive hygiene areas - ideal for kitchens and food industry. Features of the beard cover made of nylon at a glance: soft, very fine structure air-permeable, elastic and very comfortable latex-free elastic bands food-safe protection against low superficial mechanical risks

Face masks type II, 3-ply made of PP from HygostarThis medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.

Patient gowns made of PP by Hygostar These patient gowns are made of strong, pure PP. The material is breathable and particularly soft. The high-quality PP fleece makes the patient gowns pleasant and comfortable to wear. The patient gowns also provide protection against minor superficial mechanical hazards. The gowns are open at the back and can be closed with ties at the waist neck. The PP gowns are a hygienic solution for hospitals, nursing homes and other medical facilities. Features of the patient gowns at a glance: air-permeable, strong PP fleece high wearing comfort with ties at the waist and neck very hygienic prevents contamination in the care sector protection against minor superficial mechanical risks

Aprons approx. 150 my made of EVA from Hygostar The disposable aprons are made of EVA material. The abbreviation stands for ethylene vinyl acetate and is related to plastics such as PE. However, EVA is many times more hard-wearing than PE and is more durable, especially when temperatures change. EVA aprons are ideal for slaughterhouses or other food production facilities where there are frequent changes between hot and cold (e.g. cold store and production hall). They do not become brittle and remain supple. What's more, the bib aprons have a hygienic, smooth surface and the material is waterproof. Advantages of the EVA-aprons laid at a glance: very strong quality, made of EVA smooth surface, approx. 150 my durable, long-lasting and waterproof remains supple and stable during temperature changes PVC-free, food-safe laid and packed in a hygienic PE bag protection against minor superficial mechanical risks, contact with mildly aggressive cleaning agents or prolonged contact with water

Overshoes for Ecostep Comfort made of LDPE by Hygostar The overshoes made of LDPE are suitable for use in the Ecostep Comfort overshoe machine. They are water-repellent and keep your visitors' shoes dry. The Ecostep Comfort is an inexpensive alternative among overshoe machines. The matching overshoes made of LDPE are also very reasonably priced and therefore ideal for high demand and short wearing times. They can be used for industry, the food industry and hygiene-sensitive areas that need to be protected from contamination by street shoes. Features of the overshoes for Ecostep Comfort made of LDPE at a glance:  very durable water-repellent, dense LDPE protection against weakly aggressive cleaning agents protection against prolonged contact with water universal fit with elasticated cuff for a good hold on the shoe for use in the Ecostep Comfort overshoe dispenser