DuPont™ Tyvek® 500 Hood PH30L0
- Hood with wide collar and elastic bands at the face opening and neck
- is intended to provide even better protection for particularly exposed parts of the body
- permeable to air and water
- vapor repellent to water-based liquids and spray mist
Similar articles
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.60
1 Stück
Hood Cat. III Typ PB 6B | microporous
Hood Typ PB 6B | microporousThe disposable hoods are made of multi-layer, microporous fleece, which forms a highly effective barrier against water-based liquid splashes, dust and microorganisms while remaining breathable. The half-shoulder length cut covers the head, neck and upper shoulder area without restricting mobility. A circumferential, latex-free elasticated band ensures a tight, non-slip fit. The material is antistatic (EN 1149-5), tear and abrasion resistant and low-linting - ideal for cleanrooms, pharmaceutical production or food processing. PPE certification CAT III according to type PB 6B and infection protection according to EN 14126 guarantee standard-compliant safety.Properties of Hood Typ PB 6B | microporous at a glance:CAT III / EN 13034 PB 6B certifiedAir-permeable barrier material – no heat build-upHalf-shoulder design protects neck & shoulderslatex-free all-round elasticated band, secure fitantistatic finish in accordance with EN 1149-5low-linting & clean – cleanroom compatible
not available
From
€50.75
100 Stück
Disposable hoods | microporous
Disposable hoods made of microporous by Hygostar
These disposable hoods are an ideal addition to gowns and coveralls when the head and shoulder area needs extra protection. The disposable hoods are made of special microporous fabric and protect against weakly aggressive cleaning agents and against moisture. The material has a functional membrane that makes the hoods water repellent and breathable at the same time. The disposable hoods are widely used in industry and sensitive hygiene areas.
The features of the disposable hood at a glance:
special fabric with functional membrane
water repellent and breathable
covers head and shoulders
face rubber for a good fit, latex-free
for protection against weakly aggressive cleaning agents and against prolonged contact with liquids
not available
From
€36.15
100 Stück
DACH SAFE® Cleanroom hood 180W, machine-made
DACH SAFE® Cleanroom hood 180W, machine-madeThe DACH SAFE Cleanroom Hood 180W is a machine-manufactured hood specifically designed for use in cleanrooms of classes 5-9. It consists of a headpiece, two side panels and a shoulder cover, which are carefully sewn together with overlock seams. This construction ensures that the wearer’s freedom of movement remains unrestricted and that the hood does not slip, even during intensive activity. Elastic bands at the junction between the headpiece and shoulder cover, as well as in the facial area, guarantee an optimal fit and provide secure protection, particularly against hair becoming entangled in the immediate working environment. The hood has been tested for particle emission under heavy mechanical stress and has also proven to be reliable for cleanroom use during intensive physical activity, as confirmed by the Helmke Drum Test, Category II.Properties of DACH SAFE® Cleanroom hood 180W, machine-made at a glance:machine-manufactured hood for cleanrooms of classes 5-9headpiece, side panels and shoulder cover with overlock seams for secure holdunrestricted freedom of movement, no slipping even during intensive activityelastic bands at the head and shoulder area as well as in the face for optimal fit and protectiontested for particle emission and confirmed by Helmke Drum Test Category II
not available
From
€0.27
1 Stück
DACH SAFE® Cleanroom hood 181W, with lint-free seam
DACH SAFE® Cleanroom hood 181W, with lint-free seamThe DACH SAFE Cleanroom Hood 181W with lint-free seams has been specially developed for use in cleanrooms of classes 5-9 and offers reliable protection while ensuring a high degree of freedom of movement. The hood consists of a headpiece, two side panels and a shoulder cover, all finished with lint-free overlock seams. This construction prevents slipping even during intensive physical activity and ensures a stable fit. Elastic bands at the junction between the headpiece and shoulder cover, as well as in the facial area, guarantee an optimal fit and effectively protect against hair becoming entangled in the immediate working environment. The shoulder cover provides additional protection for the upper body area. The suitability for cleanroom use has been confirmed by the Helmke Drum Test, Category II, even under heavy mechanical stress.Properties of DACH SAFE® Cleanroom hood 181W, with lint-free seam at a glance:lint-free overlock seams for a stable fit without slippingsuited for cleanrooms of classes 5-9elastic bands at the head and facial area for optimal protectionadditional shoulder cover for extended particle protectionsuitability for cleanroom use confirmed by Helmke Drum Test Category II
not available
From
€0.27
1 Stück
DACH SAFE® TriCap 126W, Cleanroom hood 3 in 1
DACH SAFE® TriCap 126W, Cleanroom hood 3 in 1The DACH SAFE TriCap 126W Cleanroom Hood 3 in 1 has been specially developed to minimise particle contamination in the cleanroom and ensure the highest hygiene standards. Thanks to the extra-thin and breathable nonwoven fabric, the hood offers optimal wearing comfort without compromising its protective function. The innovative design allows for three different wearing options, so the face can be left completely uncovered, only the eye and nose area, or just the eye area. Wearing a respiratory mask is also possible without any problems.The antistatic material reliably prevents electrostatic discharges, thus minimising the risk of sparking when removing the hood. The TriCap 126W is suitable for use in ISO cleanrooms of classes 4–9 according to EN 14644-1 and can be used as a beard cover. Thanks to the high-quality nonwoven fabric and covered facial design, it is the ideal solution for demanding cleanroom applications.Properties of DACH SAFE® TriCap 126W, Cleanroom hood 3 in 1 at a glance:versatile, extra-thin and breathable nonwoven fabricantistatic material prevents electrostatic dischargessuitable for ISO cleanrooms of classes 4–9 according to EN 14644-1can be easily combined with a respiratory maskcan be used as a beard cover
not available
From
€0.19
1 Stück
DuPont™ Tyvek® 500 Hood PH30L0
The hood features a wide collar and elastic bands on the face and neck for improved protection. It was developed to protect particularly exposed areas and is at the same time permeable to air and water vapor as well as repellent to water-based liquids and spray mist.
Properties of DuPont™ Tyvek® 500 Hood PH30L0 at a glance:
- Hood with wide collar and elastic bands at the face opening and neck
- is intended to provide even better protection for particularly exposed parts of the body
- permeable to air and water
- vapor repellent to water-based liquids and spray mist
Functional range
handling pharmaceuticals, chemical protection, lead and asbestos disposal, general maintenance work, spray painting, general cleaning work and much more
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tyvek |
| Norms: |
      |
Certifications / Standards
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| product information |
Overview all norms of DuPont™ Tyvek® 500 Hood PH30L0
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Buy together with
DuPont™ Tyvek® 500 Apron PA30L0
DuPont™ Tyvek® 500 Apron PA30L0The calf-length apron made of Tyvek® offers a comfortable and secure fit with its straps in the neck and back area. With a length of 108 cm, it is ideal for reliably protecting particularly exposed parts of the body. Its air and water vapor permeable properties make it comfortable to wear while also repelling water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Apron PA30L0 at a glance:Calf-length apron with ties in the neck and back areaLength: 108cmis intended to provide even better protection for particularly exposed parts of the bodypermeable to air and water vapor repellent to water-based liquids and spray mist
not available
From
€1.75
1 Stück
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00DuPont™ Tyvek® IsoClean® overboots IC458B00 with slip-resistant Gripper™ sole offer reliable protection and high wearing comfort in one. The overboots feature covered elasticated bands at calves and leg ends as well as ankle ties to ensure a secure fit. Bound, internal seams provide additional stability.Tyvek® IsoClean® is made from high-density polyethylene, manufactured using the patented flash-spinning process, and offers an effective barrier against particles, microorganisms and harmless splashes of water-based liquids. The material is breathable, extremely low-lint and antistatic. They are compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353).The overboots are not processed under cleanroom conditions and not sterilised, but are manufactured in a controlled environment. They are suitable for use in cleanrooms of GMP class C/D as well as in industries such as biotechnology, pharmaceuticals, medical technology, food processing, cosmetics and electronics. Certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], they also comply with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Properties of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00 at a glance:overboots with slip-resistant Gripper™ sole for secure footingcovered elasticated bands at calves and leg ends as well as ankle ties for a firm fitbound, internal seams for added stability made from high-density polyethyleneeffective barrier against particles, microorganisms and splashes of water-based liquidsbreathable, extremely low-lint and antistaticnot sterilised but manufactured in a controlled environmentsuitable for cleanrooms of GMP class C/Dcompatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353)
not available
From
€1.37
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.40
1 Stück
DuPont™ Tychem® 2000 C lab coat 0290
DuPont™ Tychem® 2000 C lab coat 0290The Tychem® 2000 C lab coat from DuPont™ offers reliable protection when working with hazardous substances. The shin-length back fastening gown with a hook-and-loop closure at the neck and double cuffs ensures a secure fit, high wearing comfort and optimal connection with gloves. The combination of Tyvek® material and polymer coating provides effective protection against inorganic chemicals and biological hazards, even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, the gown meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams enhance durability.Properties of DuPont™ Tychem® 2000 C lab coat 0290 at a glance:shin-length back fastening gown with hook-and-loop closure at the neckdouble cuffs for a secure fit and optimal connection with glovesdurable combination of Tyvek® material and polymer coatingprotects against inorganic chemicals, biological hazards and contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1taped seams for enhanced durabilityideally combinable with Tychem® protective clothing
not available
From
€12.60
1 Stück
More from this brand
DuPont™ Tyvek® 400 Dual Coveralls CHF 5
DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5The protective suit made of Tyvek® offers reliable protection with its hood and external seams. The front is made of robust Tyvek®, while a large breathable SMS insert in the back area ensures comfort. Elasticated cuffs, leg ends and hood provide a secure fit, supported by a sewn-in elastic in the back. Permeable to air and water vapor as well as repellent to water-based liquids and spray mist, it offers optimal protection in various work environments. The suit is particularly suitable for applications that involve exposure of the front of the body.Properties of DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5 at a glance:Hooded suitExternal seamsFront made of Tyvek®, large breathable insert made of SMS in the back areaElasticated cuffs, leg ends and hoodElastic band in the back area (sewn in)permeable to air and water vaporrepellent to water-based liquids and spray mist
not available
From
€5.90
1 Stück
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.45
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.60
1 Stück
DuPont™ Tychem® 2000 C apron PA30L0
DuPont™ Tychem® 2000 C Schürze PA30L0The Tychem® 2000 C apron from DuPont™ offers reliable protection when working with hazardous substances. The calf-length apron with adjustable straps at the neck and waist provides a secure fit and can be flexibly integrated into existing protection concepts. Made from durable Tyvek® material with a polymer coating, it offers effective protection against a wide range of inorganic chemicals and biological hazards – even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 provide additional safety. The apron is the ideal complement to the DuPont™ Tychem® 2000 C range.Eigenschaften der DuPont™ Tychem® 2000 C Schürze PA30L0 im Überblick:calf-length apron with adjustable straps at neck and waistsecure fit and flexible integration into existing protection conceptsdurable Tyvek® material with polymer coatingeffective protection against inorganic chemicals and biological hazardssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€4.30
1 Stück
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00DuPont™ Tyvek® IsoClean® overboots IC458B00 with slip-resistant Gripper™ sole offer reliable protection and high wearing comfort in one. The overboots feature covered elasticated bands at calves and leg ends as well as ankle ties to ensure a secure fit. Bound, internal seams provide additional stability.Tyvek® IsoClean® is made from high-density polyethylene, manufactured using the patented flash-spinning process, and offers an effective barrier against particles, microorganisms and harmless splashes of water-based liquids. The material is breathable, extremely low-lint and antistatic. They are compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353).The overboots are not processed under cleanroom conditions and not sterilised, but are manufactured in a controlled environment. They are suitable for use in cleanrooms of GMP class C/D as well as in industries such as biotechnology, pharmaceuticals, medical technology, food processing, cosmetics and electronics. Certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], they also comply with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Properties of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00 at a glance:overboots with slip-resistant Gripper™ sole for secure footingcovered elasticated bands at calves and leg ends as well as ankle ties for a firm fitbound, internal seams for added stability made from high-density polyethyleneeffective barrier against particles, microorganisms and splashes of water-based liquidsbreathable, extremely low-lint and antistaticnot sterilised but manufactured in a controlled environmentsuitable for cleanrooms of GMP class C/Dcompatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353)
not available
From
€1.37
1 Stück
DuPont™ Tyvek® 500 HV Protective Coveralls 125
DuPont™ Tyvek® 500 HV Protective Coveralls 125The protective coveralls are equipped with a collar for extra protection and have an ergonomic, protective design that combines comfort and safety. The external seams ensure increased durability and prevent the penetration of harmful substances. Elasticated arm and leg cuffs ensure a secure fit, while a bonded elasticated waist provides additional protection and freedom of movement.Properties of DuPont™ Tyvek® 500 HV Protective Coveralls 125 at a glance:protective suit with collar available in fluorescent orange with silver reflective strips for visibility during the day and at night (in the presence of a light source)ergonomic and protective designexternal seamselasticated arm and leg cuffselasticated waist (glued in)large, easy-to-grip zipper slider
not available
From
€15.00
1 Stück