Protective gowns Protect type PB 4B + PB 6B | PP, PE partly laminated
- PP protective gown with PE part coating
- CAT3 certification, virus-proof
- very tight (type PB 4B + PB 6B)
- lamination on arms and front
- protection against infectious and biological hazards
- comfortable knitted cuffs at arm ends
To product advisor
Similar articles
Protective gowns Protect type PB 6B | PP, PE fully laminated
Protective gowns type PB 6B made od PP, PE fully laminated from Hygostar
These high-quality protective gowns can be used as protective clothing against infectious agents (biological hazards) and liquid chemicals (limited splash resistance). The disposable gowns are tested according to DIN EN 14325 and EN 14126 (type PB 6B), which defines the minimum requirements for chemical protective clothing. They are made of soft PP non-woven and have a full PE coating on the arms, front and back. This coating makes the gowns particularly tight and robust. Therefore, the protective gowns can be used as chemical protective clothing with limited protective effect. This means they are suitable for use with light chemical sprays, liquid aerosols or splashes that impinge at low pressure, and wherever a complete barrier against liquid permeation (at the molecular level) is not required. The protective gowns meet the standard of partial body protection. This is indicated by the abbreviation "PB" (Partial Body Protection) in the designation. The protective gowns are ideal for hygiene-sensitive areas in care and medicine.
Advantages of the protective gowns type PB 6B at a glance:
protective clothing against infectious agents (biological hazards) and liquid chemicals (limited splash protection)
soft PP-fleece with PE-full lamination on arms, front and back side
CAT3 certification
neck and waist ties
not available
From
€49.25
100 Stück
Gowns Med Light with neck velcro | PP, PE partly laminated
Gowns Light with velcro, made of PP, PE partly laminated from Hygonorm
The disposable gowns are made of lightweight PP fleece and have a PE coating on the arms and the entire front. The material has been tested for virus-tightness in accordance with EN 14126 and provides a very good barrier against contamination. The PP gowns are worn in hospitals and care facilities as external protection and ensure complete hygiene. They can be closed at the neck with velcro and are overall very light and comfortable to wear.
Advantages of the gowns with velcro fastener and partial PE lamination at a glance:
light PP fleece, air-permeable
arms and front side coated with PE
material tested for viral tightness according to EN 14126
velcro fastener, waistband to tie
soft knitted cuffs at arm ends
for external protection to prevent contamination in the care sector
suitable dispenser for gowns:
art.-no. 88938: stainless steel dispenser
art.-no. 88950: double dispenser made of acrylic
not available
From
€48.80
100 Stück
Gowns Med Eco with neck ties | PP/PE, partly laminated
Gowns Eco with neck ties made of PP, PE partly laminated by Hygonorm
These gowns from the inexpensive Eco series are made of lightweight PP nonwoven. The special feature: The arms and front are laminated with a layer of PE. This lamination is water-repellent and tested for virus tightness in accordance with EN 14126. Thus, the gowns Eco prevent contamination in the care sector and are ideal as foreign protection for hospitals, nursing homes and retirement homes. The disposable gowns have a tie band at the neck and waist. From the low-priced Eco series, you can also find gowns with Velcro closure or uncoated gowns made only of PP at Franz Mensch.
Features of the gowns Eco with neck ties and partial lamination at a glance:
arms and front laminated with PE
coating tested for viral tightness according to EN 14126
gown made of lightweight, low-cost PP fleece
air-permeable back
tie bands in neck and waist
for protection of third parties to prevent contamination in the care sector
not available
From
€46.35
100 Stück
Gowns Med with elastic wrist band | PP
Gowns with elastic wrist bands made of PP by HygostarThese gowns are universally suitable for many hygiene areas - including food production. Especially in care areas, they prevent contamination and the spread of germs as external protection. They are used as disposable gowns for visitors as well as for patients or employees. The gowns are made of very high-quality, soft PP fleece and therefore offer a high level of wearing comfort. Thanks to the generous cut, the disposable nonwoven gowns can be easily worn over normal clothing and offer plenty of freedom of movement.To close, simply tie the ties at the waist and neck at the back. For a good hold without slipping, a latex-free elastic band is incorporated at the end of the arms. Hygiene with colour system: disposable gowns in blue, white, red, yellow and greenThis selection is unique: the gowns with arm elastic are available in many sizes and, above all, in 5 colours, so that they can also be used to colour-code different hygiene areas, e.g. also as area clothing.Matching dispensers and wall holders for disposable gown:Art.-Nr. 88950: Double dispenser for disposable clothing made of acrylicArt.-Nr. 88938: Dispenser for coats and overalls made of stainless steelFeatures of the gowns with elastic wrist bands at a glance: high quality material made of pure PPair-permeable and comfortable to wearelastic band at wrist, latex freewith waist and neck closure straps good freedom of movement thanks to generous cutfavorable manufacturer pricesindividually and hygienically packed in PE bagfor external protection to prevent contamination in the care area
not available
From
€34.05
100 Stück
Gowns Med Light with thumbhole | CPE
Examination gowns with thumbhole Light made of CPE by Hygonorm
These gowns are made of lightweight CPE material. The abbreviation CPE stands for Cast Polyethylene. The material makes the gowns impervious to water and other liquids. The gowns are therefore ideal as examination gowns for personnel in hospitals, nursing and retirement homes. Another advantage is that the material has been tested for virus tightness in accordance with EN 14126 and prevents contamination by protecting against foreign bodies. In addition, the examination gowns have a thumb hole at the cuffs. This means that the sleeves are easily secured and do not slip.
Featrues of the examination gowns with thumbhole Light at a glance:
lightweight CPE, liquid-tight
tested for viral tightness, based on EN 14126
thumb hole prevents sleeve slippage
tie band at waist
individually packed
for external protection to prevent contamination in the care sector
not available
From
€26.85
100 Stück
Gowns Med with neck velcro | PP, PE partly laminated
Gowns with velcro made of PP, PE partly laminated by Hygostar
These high-quality gowns from Hygostar are made of pure PP and have an additional PE coating on the front. The PE material is tested for virus tightness based on EN 14126. It prevents contamination in sensitive hygiene areas. The gowns are therefore very suitable for use as external protection in the care sector. But also in retirement homes and hospitals you are right with these gowns. The carrier material is high-quality, strong PP fleece. It is air-permeable and comfortable even when worn for long periods. The PE coating is applied on the entire front side as well as on the arms. The gowns are simply closed in the neck by velcro and in the waist with a tie.
Features of the gowns with velcro and partial lamination at a glance:
with partial PE coating on arms and front side
PE material tested for virus tightness according to EN 14126
soft PP fleece in very high quality
width adjustable with tie band at the waist
velcro fastener at the neck
arm ends with knitted cuffs
air-permeable back
not available
From
€36.45
100 Stück
Matching accessories
Dispenser for coats and overalls | stainless steel
Stainless steel dispenser for gowns and coveralls from Hygostar
Stainless steel dispensers are ideal for hygienic storage of protective clothing and disposable clothing. This is because stainless steel is rustproof, durable and, thanks to its hardness, resistant to hot cleaning or disinfection. Stainless steel dispensers have a smooth surface and can therefore be thoroughly cleaned at any time.
Hygostar gown and coverall dispensers are among the most popular dispensers at Franz Mensch. They store all large items of clothing such as loose visitor gowns, surgical gowns or disposable coveralls. Thanks to the viewing window on the front of the wall holder, you can always see the contents and filling quantity. The stainless steel wall holder is equipped with a large removal opening and can be easily refilled via the top flap.
The features of the stainless steel dispenser at a glance
hygienic stainless steel, rustproof
robust and durable
with inspection window to check the filling level
quick removal thanks to large opening at the bottom
easy refilling via the upper lid
suitable for all loose gowns, overalls and large garments
Why stainless steel for hygienic areas?
Stainless steel has many advantages from a hygiene point of view. For one thing, stainless steel is rust-free and therefore ideal for sensitive manufacturing and hygiene areas. During production, foreign substances such as aluminum or sulfur are removed, resulting in a particularly pure steel. Secondly, stainless steel is extremely robust, stable and hard. It permanently withstands high temperatures and chemicals used in disinfection measures, cleaning or sterilization. Dispensers or work equipment made of stainless steel are a long-term and hygienic solution. This is because stainless steel also has a particularly smooth surface that does not become rough or cracked. This means that germs have no opportunity to settle on the surface.
not available
From
€119.50
1 Stück
Double dispenser for disposable clothing "Double" | Acrylic
Double dispenser for disposable clothing "Double" | Acrylic
This model is a real multidispenser. It can be used for bonnets, protective sleeves, gowns but also for overalls. The inclined lid helps to remove the products quickly, as the contents slide forward.
Properties of double dispenser for disposable clothing "double" at a glance:
Acryl, robust lid made of PET
individually divisible by partition wall, 3 positions
inclined lid prevents dust deposit
quick removal thanks to inclined bottom, content slides to the front
not available
From
€98.25
1 Stück
Protective gowns type PB 4B + PB 6B made of PP, partly laminated with PE
The protective gowns Type PB 4B + PB 6B are made of polypropylene (PP) and are CAT3-certified. The material used has been tested for viral penetration according to EN 14126. This makes the gowns a reliable barrier against irreversible or life-threatening risks in pharmaceutical or medical environments. The gowns are partially coated with PE, meaning that both the arms and the entire front side are covered with a high-quality PE lamination. This makes the gowns resistant to liquids and splashes. The sleeve ends are equipped with comfortable knitted cuffs for a secure fit. The partially laminated protective gowns Type PB 4B + PB 6B are suitable for use in pharmaceuticals, medical settings, and emergency medical services.
Features of the protective gowns type PB 4B + PB 6B | PP, PE at a glance:
- material tested for viral resistance according to EN 14126
- CAT3 certification
- high barrier performance
- protection against infectious and biological hazards
- PE lamination on arms and front side
- high liquid resistance
Functional range
pharmaceutical/medical sector and medical emercency services
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | PP |
| Norms: |
      |
Certifications / Standards
| CE 0624 |
| CAT 3 - Personal protective equipment category 3 |
| EN 14126:2003+AC:2004 - Protective clothing against infectious agents |
| EN 14605:2009 PB 4B, EN 13034:2009 PB 6B - Protective clothing against liquid chemicals, partial protection type PB 4B and 6B |
| product information |
| Do not reuse |
Overview all norms of Protective gowns Protect type PB 4B + PB 6B | PP, PE partly laminated
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Virus-resistant, partly laminated protective gown – high protection level for hygiene areas
The protective gown Type PB 4B + PB 6B is specifically designed for use in demanding areas such as pharmacy, medicine, and emergency services. This virus-resistant protective gown provides comprehensive protection against hazardous and potentially lethal risks. With its CAT3 certification, it meets the highest safety standards and is ideal for environments with high demands for personal safety.
Application areas of the protective gown Type PB 4B + PB 6B
The protective gown is excellently suited for pharmacy, medical facilities, and emergency medical services. It is used where protection against infectious substances and biological hazards is essential, such as in laboratories, hospitals, or during the manufacturing of medications. Thanks to its high barrier effect against liquids and splashes, it reliably protects against infectious and potentially harmful substances.
Advantages and features of the protective gown
- partial lamination for optimum protection: The PE coating on the arms and the entire front makes this gown particularly impermeable and provides an effective barrier against liquids, splashes and aerosols.
- virus- and liquid-tight: The protective gown is made from a virus-tight material certified according to EN 14126. This standard certifies that the gown provides an effective barrier against infectious substances.
- comfortable design with knit cuffs: Thanks to the knit cuffs on the sleeves, the gown fits snugly at the wrist, enhancing comfort and providing a pleasant hold.
- high tightness and barrier against biological hazards: The combination of polypropylene (PP) as the base material and the polyethylene coating (PE) ensures an extremely tight surface that effectively repels liquids and viral particles.
Type designations PB 4B and PB 6B
The designation PB stands for partial body protection and means that the protective gown is specifically designed to protect certain body areas.
- Type 4B: This classification represents protective clothing that is tight against spray mist (aerosols). The protective gown meets the requirements of this type, making it particularly effective against liquid chemicals or infectious liquids.
- Type 6B: This lighter protection class protects against limited liquid contact and light spray mist. It is ideal for use in areas where there is a risk of brief contact with liquids.
Both types also provide protection against contamination and health hazards, making the protective gown optimal for medical and pharmaceutical applications.
Conclusion: The ideal protective gown for sensitive areas
The protective gown Type PB 4B + PB 6B | PP, PE partly laminated is an excellent choice for anyone working in areas with high biological and infectious hazards. With its PE lamination, virus-tight structure, and ergonomic fit, it meets the highest safety standards and provides reliable protection in a professional environment.
 |
The Top 4 protective gowns at a glance:From budget to premium: Compare the protective gowns here in the selection guide (PDF). |
Key facts about the protective gown Type PB 4B + PB 6B at a glance:
- made from virus-tight material
- CAT3 certification
- barrier against infectious and biological hazards (EN14126)
- partly PE-laminated on the arms, front, and back
- high tightness
Need more?
Visitor gowns, caps, overshoes: The entire range of disposable clothing is available here as a brochure (PDF).
Buy together with
Overshoes for Ecostep Comfort | PP
Overshoes for Ecostep Comfort made of PP
The overshoes are air-permeable, soft and very comfortable to wear. The soft PP fleece covers street shoes hygienically and keeps sensitive areas clean. The overshoes can be used with the Ecostep Comfort overshoe dispenser. The Eco Step is inexpensive and ideal for visitors in industry and the food industry. The overshoes made of PP fleece are available in one size and fit universally for all shoe sizes thanks to the elastic on the shaft.
Features of the overshoes for Ecostep Comfort made of PP at a glance:
air-permeable and pleasantly light to wear
soft fleece made of PP
very durable
protection against low superficial mechanical risks
suitable for indoor use
good fit thanks to elasticated cuff
for use in the Ecostep Comfort overshoe dispenser
not available
From
€15.35
160 Stück
Face masks type II, 3-ply | PP, individually packed
Face masks type II, 3-ply made of PP, individually packed by Hygostar
The 3-ply face mask type II is individually packed in a bag. It is therefore particularly suitable for handing out to employees or visitors. The masks are handled by the wearer's hands only - very clean and hygienic. The face mask type II has an excellent filtering performance of 98% BFE and is approved for use in the medical field. The face masks are used as foreign body protection in hospital and nursing care. They protect against so-called droplet infections.
Features of the face masks type II, individually packed at a glance:
hygienic single packs
98 % BFE, excellent filter performance
high-quality PP fleece
3 layers
tight fit thanks to elastic ear loops
adjustable nose clip for a good hold of the mask
for single use
not available
From
€5.90
100 Stück
Safety goggles, ventilated | PVC
Safety goggles ventilated, PVC
This is made of transparent, pleasantly soft PVC with polycarbonate lenses. Thanks to the integrated air valves, they are ventilated and thus offer a high level of wearing comfort. In addition, the safety goggles are very suitable as over-glasses for spectacle wearers. They are particularly comfortable and fit snugly, and thanks to the elastic band, the safety goggles sit close to the face. The safety goggles reliably protect your eyes from dust, non-corrosive liquids and splashes.
Important properties of the safety goggles ventilated at a glance:
ventilated, integrated air valves
very comfortable to wear
elastic headband, individually adjustable
against minor mechanical shocks (F)
suitable for wearers of glasses
not available
From
€1.03
1 Stück
Bouffant caps Bettina Eco | PP
Bouffant caps Bettina Eco made of PP by Hygonorm
These PP fleece bouffant caps are the classic headwear for sensitive production areas and hygiene areas such as canteen kitchens, catering and the food industry. Your special advantage: The bouffant caps Bettina Eco are made of very light PP and therefore also very favourable in price. The disposable hoods are ideal if you have a high demand and the hoods need to be changed frequently. The PP caps are air-permeable, comfortable to wear and approved for contact with food.
Properties of the bouffant caps Bettina Eco at a glance:
comfortable to wear, latex-free
air-permeable, very light PP fleece
food-safe
different diameters available for long or short hair
not available
From
€2.17
100 Stück
Patient gowns | PP
Patient gowns made of PP by Hygostar
These patient gowns are made of strong, pure PP. The material is breathable and particularly soft. The high-quality PP fleece makes the patient gowns pleasant and comfortable to wear. The patient gowns also provide protection against minor superficial mechanical hazards. The gowns are open at the back and can be closed with ties at the waist neck. The PP gowns are a hygienic solution for hospitals, nursing homes and other medical facilities.
Features of the patient gowns at a glance:
air-permeable, strong PP fleece
high wearing comfort
with ties at the waist and neck
very hygienic
prevents contamination in the care sector
protection against minor superficial mechanical risks
not available
From
€61.75
100 Stück