FFP masks

Respirators are part of the Personal Protective Equipment (PPE) and are used where respiratory toxins, chemical substances, dust or bacteria occur. Choose between three filter classes (FFP1, FFP2, FFP3) and different designs: Protective masks with or without breathing valve, with ear loops or comfortable head straps.

Sorting:

Respirators FFP2 NR, 3D made of PP with imprint

Respirators FFP2 NR, 3D | PP

Respirators FFP2 NR, 3D made of PP The most comfortable FFP2 mask on the market: noticeably easier breathing, no pressure behind the ears and pleasant ventilation. The FFP2 NR respirators in 3D panel design are a real innovation. The FFP2 masks convince with their high wearing comfort - even during long and frequent wearing. Thanks to the three-part 3D panel design (also called fish shape) and the high-quality, soft PP fleece, the respirators are as pleasantly light to wear as a surgical mask. The extremely low breathing resistance makes it much easier to breathe in and out, and you can breathe through in a relaxed manner - 50% better breathing ability than the standard. At the same time, the masks meet the high standard of an FFP2 respirator and reliably protect against liquid and solid aerosols. The FFP2 mask in fish shape achieve a top filtering performance of over 99%. Even more comfort is provided by the soft ear elastics and the low weight of the masks. This reduces the pressure behind the ears and the FFP2 masks are comfortable for a long time. The malleable nosepiece and ergonomic fit allow the mask to fit very close to the face - for high protection and less fogging of glasses. *Your advantage: The 3D-respirators FFP2 NR have a pharmaceutical central number (PZN): single package - PZN 18018012; box - PZN 18018029 Advantages of the FFP2 NR, 3D | PP respirators at a glance: Premium mask for easier breathing especially breathable and comfortable made of soft, high-quality PP fleece easy to wear, similar to a mouth guard excellent filter performance according to FFP2 standard optimal fit and formable nose clip for a tight fit good visibility due to less fogging of the goggles soft ear loops for less pressure behind the ears hygienic in single pack horizontally folded, fish shape in three-part 3D panel design

Colour

breathe easier

Respirators FFP2 NR, 3D made of PP in side view as sample with writing

Respirators FFP2 NR, 3D | PP, small package

Respirators FFP2 NR, 3D made of PP as small package Much easier breathing, no ear pressure and pleasant ventilation: The FFP2 NR respirators in 3D panel design are also available in a small pack. These innovative FFP2 masks are currently the most comfortable on the market. They wear easily and comfortably like a medical mouthguard - even when worn for long periods. The special feature: The high-quality, newly developed fleece material provides 50% more breathing capacity than the standard. You can feel this clearly when breathing in and out. This extremely low breathing resistance of the FFP2 masks and the three-part 3D panel design (also called fish shape) make the masks so comfortable. In addition, the FFP2 NR 3D respirators achieve a top filtering performance of over 99%. These excellent values ensure high protection against liquid and solid aerosols. Advantages of the FFP2 NR, 3D respirators in the small pack at a glance: 50% easier to breathe innovative 3D design, fish shape in a practical small pack ultralight, less weight for less pressure behind the ears ergonomic fit for a tight seal on the face (less fogging of glasses) premium mask with over 99% filtering efficiency highest comfort for a long time made of PP fleece, horizontally folded malleable nose clip soft ear loops hygienic single pack

Colour

Respirators FFP2 NR, vertically foldable, ear loops made of PP as small pack in the close view

Respirators FFP2 NR, vertically foldable, ear loops | PP

Respirators FFP2 NR with ear loopsThe respirators are made of high-quality PP fleece and are folded vertically. The wearing method with the ear loops is particularly practical if the mask is frequently put on and taken off in everyday life. In addition, folding masks with ear loops are cheaper than overhead straps or pre-formed protective masks. The FFP2 NR respirators come with an S-hook that allows an alternative way of wearing them. Simply close the loops at the back of the head with the hook. This relieves the strain on your ears and makes the mask noticeably more comfortable even when worn for long periods. The FFP2 masks are ideal for medicine, laboratory, nursing, hospital as protective equipment, food industry and hygiene-sensitive areas. They reliably protect against solid and liquid harmful dusts, smoke and aerosols.Features of the respirators FFP2 NR with ear loops at a glance: folding mask, folded verticallypractical ear loops, more favourable than headbandshigh quality PP fleeceflexible noseband for a tight fitreduces the absorption and transmission of infectious agentsindividually packed

Colour

Tip to save up

Respirators FFP3 NR with valve, horizontally foldable made of PP in the oblique view

Respirators FFP3 NR with valve, horizontally foldable | PP

Respirators FFP3 NR with valve, horizontally foldable made of PP by Hygostar The respirators FFP3 NR with valve provide a high level of protection. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. Thanks to the incorporated breathing valve, the masks are very comfortable to wear for a long time. The valve reduces breathing resistance and noticeably facilitates inhalation and exhalation. The FFP3 NR respirators with valve are ideal for personnel in industry, food production and other hygiene-sensitive areas. They are horizontally folded and therefore favourable and space-saving. Features of the respirators FFP3 NR with valve, horizontally foldable at a glance: high-quality PP fleece, soft on the skin folded horizontally breathing valve for easier breathing head band, no pressure behind the ears malleable noseband for improved fit

Colour

Respirators FFP3 NR, vertically foldable made of PP in the oblique view

Respirators FFP3 NR, vertically foldable | PP

Respirators FFP3 NR, vertically foldable made of PP The FFP3 NR respirators are vertical folding masks and have size-adjustable head band. By clip you adjust the length of the bandexactly to fit your head size - for a comfortable and perfect fit. The FFP3 masks meet a high filtering standard and protect against toxic and harmful dusts, smoke and aerosols. FFP3 NR respirators are comfortable for a long time and therefore suitable for professional use. They are versatile as protective equipment in medicine, laboratory, nursing, hospital, industry, food industry and hygiene-sensitive areas. Features of the respirators FFP3 NR, vertically foldable at a glance: high-quality, soft PP fleece vertically folded, large breathing surface with head band, no pressure behind the ears high wearing comfort very good fit thanks to individually adjustable overhead straps mouldable nose clip, so that the mask fits tightly reduces the spread of infectious agents

Colour

Respirators FFP3 NR with valve, vertically foldable made of PP in the oblique view

Respirators FFP3 NR with valve, vertically foldable | PP

Respirators FFP3 NR with valve, vertically foldable made of PP by Hygostar The FFP3 respirators with valve meet the highest category of respiratory protection filter classes. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. They are particularly suitable for sensitive areas where hygiene and protection against infection are top priorities. These include medicine, laboratory, nursing, hospital as protective equipment, industry and food industry. the respirators FFP3 NR have an integrated valve. So you breathe noticeably easier and more comfortable. The masks are fixed with head band - without pressing behind the ear. So the FFP3 masks feel comfortable even when worn for long periods. Features of the respirators FFP3 NR with valve, vertically foldable at a glance: high wearing comfort high-quality material made of PP fleece vertically folded, large breathing surface valve facilitates inhalation and exhalation with head band - no pressure behind the ear with clip for easier putting on and taking off of the mask flexible nose clip for tight fit

Colour

Respirators FFP2 NR with valve vertically foldable made of PP with breathing valve

Respirators FFP2 NR with valve, vertically foldable | PP

Respirators FFP2 NR with valve, vertically foldable made of PP by Hygostar FFP2 masks with valve are particularly comfortable. The breathing valve noticeably facilitates inhalation and exhalation. The FFP2 NR respirators are vertically folded and therefore particularly space-saving. The folding masks are made of high-quality PP material and provide reliable protection of the FFP2 category. FFP2 masks protect against solid and liquid harmful dusts, smoke and aerosols. They are ideal for employees in hygienic areas such as medicine, laboratory, nursing, hospital, industry or food production. The FFP2 NR respirators are for single use - identified by the abbreviation "NR" for "not reusable". The head band ensure a tight fit without pressing behind the ears. Features of the respirators FFP2 NR with valve, vertically foldable at a glance: high-quality fleece made of PP vertically folded low breathing resistance thanks to valve with overhead straps for tight fit malleable nose clip very comfortable protection against solid and liquid harmful dusts, smoke and aerosols Masks are individually packed

Colour

Respirators FFP2 NR, vertical foldable made of PP in oblique view

Respirators FFP2 NR, vertically foldable | PP

Respirators FFP2 NR, vertical foldable made of PP FFP2 NR respirators are made of high quality breathable PP fleece. They meet the FFP2 performance level and thus protect against solid and liquid harmful dusts, smoke and aerosols. The FFP2 masks are versatile and reduce the absorption and transmission of infectious agents. The protective masks are particularly suitable for employees in medicine, laboratory, nursing, hospital as protective equipment, industry, food industry and hygiene-sensitive areas. The FFP2 protective masks are folded vertically, providing a large breathing surface for easier inhalation and exhalation. At the same time, folded respirators are a cheaper alternative to preformed cups because they are easier to manufacture. Thanks to the moldable nose clip, the disposable masks seal well and fit tightly to the face. The elastic, latex-free headgear does not pinch behind the ears and is very comfortable over a long period of time. Advantages of the respirators FFP2 NR, vertical foldable at a glance: vertically folded, large breathing surface latex-free headband, no pressure behind the ears very comfortable even when worn for long periods breathable, high quality PP fleece malleable nose clip for tight fit and good seal reliable filter performance of level FFP2 protection against solid and liquid harmful dusts, smoke and aerosols individually packed in a hygienic bag pharmacy central number (PZN) 1 piece: 17162089 pharmacy central number (PZN) 10 pieces: 17161279 What you should know about respirators When it comes to respirators, all guideline values and minimum requirements are defined in EN149:2001 + A1:2009. The filter classes FFP1, FFP2 and FFP3 are also precisely defined there. Read the most important facts about the so-called filtering half masks here. Respirators (also called fine dust masks) that comply with EN 149 are suitable for use with liquid and solid aerosols and protect the wearer from these health hazards. They are part of the PPE (Personal Protective Equipment) and are required by law in many industrial work areas. Respirators are divided into three protection classes: FFP1, FFP2 and FFP3. The protection classes are based on the so-called MAK value: The value corresponds to the concentration at the workplace to which an employee can be exposed without suffering an adverse health effect. FFP1 = small particle quantities; FFP2 = medium particle quantities; FFP3 = large particle quantities. The abbreviation FFP stands for Filtering Face Piece. In accordance with legal requirements, the protective masks are tested with sodium chloride (solid aerosols) and with kerosene oil (liquid aerosols). Depending on the filter class, respirators protect against many times the MAK limit value (VdGW). Filter class FFP1 up to 4 times MAK, application: protection against coarse, health-endangering dry particles and aerosols; e.g. wood grinding dust, quartz dust, coarser allergens, pollen, etc. Filter class FFP2 up to 10 times MAK, application: protection against dry particles and aerosols hazardous to health; e.g. metal dusts, mineral fiber dusts, polishing dusts, construction site dusts, etc. Filter class FFP3 up to 30 times MAK, application: protection against very fine, health hazardous dry particles and aerosols e.g. chemical industry, bacteria, viruses, simple radioactive dusts etc. Why respirators with valve? FFP masks are also available as a variant with an exhalation valve. This makes breathing noticeably easier and more pleasant. A valve improves ventilation in the mask, lowers the temperature and ensures that less moisture forms in the mask. Protective masks with a valve are therefore more comfortable and more kind to the skin. However, they can only be used for self-protection (PPE), because possible germs of the wearer can be released to the outside world via valve. This means that if the focus is on protection against infection, respirators without a valve should be used. FFP masks without a valve offer both external protection and self-protection. What does the "NR" mean for protective masks? NR stands for "Not reusable" and states that it is a disposable mask, which is intended for single use.

Colour

top seller

Respirators FFP2 NR D with valve, cup-shaped made of PP in the close oblique view

Respirators FFP2 NR D with valve, cup-shaped | PP

Respirators FFP2 NR D with valve, cup-shaped made of PP by Hygostar These masks are so-called dolomite fine dust masks. Among other things, they protect against very fine dolomite dusts - recognizable by the "D" in the product designation. The FFP2 masks are made of high-quality PP material. Thanks to the ergonomic cup shape, they seal particularly well - even at the edges. The flexible nose clip closes very well on the nose. The respirators meet the FFP2 standard and protect against solid and liquid harmful (dolomite) dusts, smoke and aerosols. They are used especially in industry, but are also suitable for food production and other hygiene-sensitive areas. Dolomite masks are comfortable for a long time. Thanks to the head straps, nothing presses behind the ears. The breathing valve noticeably facilitates inhalation and exhalation. Features of the respirators FFP2 NR D with valve, cup-shaped at a glance: Protection against very fine dust, e.g. dolomite dust ergonomic fit, preformed high quality PP fleece valve for easier breathing head band for tight fit, latex-free flexible noseband, soft nasal pillow

Colour

Respirators FFP3 NR with valve, cup-shaped made of PP in the oblique view

Respirators FFP3 NR with valve, cup-shaped | PP

Respirators FFP3 NR with valve, cup-shaped made of PPThese respirators fulfil the FFP3 category and protect against toxic and harmful dusts, smoke and aerosols. The pre-moulded, ergonomic cups fit particularly well. The FFP3 NR respirators are also equipped with a sealing lip that seals the edges to the face particularly well. The FFP3 masks have a breathing valve that ensures comfortable and easy exhalation. The masks are worn with head straps that can be individually adjusted in length. Your advantage: perfect fit, no pressure behind the ears and a comfortable fit for a long time. The respirators are high-quality and ideal for hygiene-sensitive areas such as medicine, laboratories, care, hospitals as protective equipment, industry and the food industry.Features of the respirators FFP3 NR with valve, cup-shaped at a glance:high-quality PP fleeceergonomic fit, pre-moulded cupvalve for easier breathingadjustable head straps for a firm, comfortable fitwith sealing lip for particularly good sealing at the edgessoft nose cushion

Colour

price reduced

New

Respirators FFP2 NR with valve cup-shaped made of PP in the oblique view

Respirators FFP2 NR with valve, cup-shaped | PP

Respirators FFP2 NR with valve, cup-shaped made of PP by Hygostar Cup shaped protective masks such as the FFP2 NR respirators with valve seal particularly well against the face. They are superior to folding masks in terms of tightness. The preformed cups of the FFP2 masks are made of high-quality PP fleece - pleasant and soft on the skin. The integrated breathing valve makes exhalation noticeably easier. The FFP2 NR respirators are ideal for industry, the food industry and hygiene-sensitive areas. They protect against solid and liquid harmful dusts, smoke and aerosols. The FFP2 masks are worn with head band and prevent uncomfortable pressure behind the ears. Features of the respirators FFP2 NR with valve, cup-shaped at a glance: ergonomic fit thanks to preformed cup high-quality PP fleece valve facilitates breathing with overhead straps, no pressure behind the ears comfortable nose cushion flexible noseband for a tight fit

Colour

Respirators FFP2 NR with valve, cup-shaped | PP, economy pack

Colour

economy pack

New

BLS Respirators Zer031, FFP3 R D, with valve

BLS Respirators Zer031, FFP3 R D, with valveThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, placed inside between the layers of filter material, adapts perfectly to the nose and eye profile, ensuring good vision and maximum compatibility with eyewear. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. The shelf life of the masks is 10 years!Features of the BLS Respirators Zer031, FFP3 R D, with valve at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated nose piece and welded strapsWith sealing tape to effectively prevent leaks, even with most beard wearersSimple, intuitive useShelf life of the mask: 10 yearsProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

Colour

Respirators FFP3 NR D with valve, cup-shaped made of PP in the oblique view

Respirators FFP3 NR D with valve, cup-shaped | PP

Respirators FFP3 NR D with valve, cup-shaped made of PP by Hygostar The dolomite respirators meet the high requirements of category FFP3. The masks protect the wearer from toxic and harmful dolomite dusts, smoke and aerosols. They are made of high-quality PP fleece and are particularly tight. The ergonomic shape ensures a very good, tight fit on the face. The integrated valve makes breathing in and out much easier and makes the FFP3 mask comfortable to wear for a long time. The elastic overhead bands are latex-free and do not pinch behind the ears. These dolomite FFP3 respirators are ideal for professionals and high protection requirements. They are particularly used in industry, but are also suitable for the food industry and other hygiene areas. Features of the respirators FFP3 NR D with valve, cup-shaped at a glance: protection against the finest dust, also dolomite dust preformed cup, ergonomic fit high-quality PP fleece with valve for easier inhalation and exhalation with head band, no pressure behind the ears, latex-free flexible noseband soft nasal pillow, high wearing comfort

Colour

New

Moldex Classic Respirators 2555, FFP3 NR D, with Ventex®-valve

Moldex Classic Respirators 2555, FFP3 NR D, with Ventex®-valveEven our basic version has all the product advantages that make Moldex FFP masks so successful. The flexible ActivForm® 3D design automatically adapts to the shape and movements of the face. As a result, Moldex masks fit tightly and comfortably, easily and without a nose clip. Our DuraMesh® mask grid keeps FFP masks in shape even under the toughest conditions. A soft, skin-friendly inner fleece provides additional comfort. A bag protects the individually packed masks in the packaging from dust and moisture. With Ventex Climate Valve®: Exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and moisture. Full-length straps: Allows fine adjustment of the distribution of tension on the head.Made in Europe: All Moldex FFP masks are 100% manufactured in Europe. Product and packaging are 100% PVC free.The FFP2 mask provides reliable protection against hazardous dusts and biological agents of risk group 3 and has also passed the dolomite dust test. The mask is not reusable and must be disposed of after use.Filter layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA) Straps, climate valve®: natural rubberProperties of Moldex Classic Respirators 2555, FFP3 NR D, with Ventex®-valve at a glance:Safe and comfortable thanks to ActivForm® 3D designDuraMesh® mask grid keeps the mask in shapeClimate valve® makes breathing in and out easierDolomite dust testReliable protection against particles

Colour

New

BLS Respirators 670next, FFP2 NR D

BLS Respirators 670next, FFP2 NR DThe FFP2 respirator BLS 670next is a 2-fold folded respirator. It is available in 2 different sizes, offering the perfect fit. The mask has a shelf life of 10 years! The mask is without an exhalation valve. The mask can be optimally adjusted in the nose area with the internal nose clip. The textile elastic bands are made of a hypoallergenic, latex-free material and offer a secure and optimal fit and prevent hair from getting caught. Designed as a disposable mask (NR = Not Reusable), the mask has a dolomite dust test. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The addition of an innovative inner core gives the filter mask strength and high breathability combined with low breathing resistance.Properties of BLS Respirators 670next, FFP2 NR D at a glance:2-fold folded design for particularly low breathing resistanceDolomite dust testWithout exhalation valveTextile straps - to avoid trapped hairHygienic individual packagingShelf life of the mask: 10 yearsProtection against dusts/smoke/aerosols of particles of medium toxicity in concentrations

Colour

New

BLS Respirators Zer033, FFP3 R D, with valve

BLS Respirators Zer033, FFP3 R D, with valveThe 3-flap filter masks in the BLS Zer0 Flat series offer a high level of protection combined with exceptional breathing comfort. They have a surface micromesh that prevents clogging of the filter material and the absorption of liquids, thus extending the service life of the mask. The face mask offers the protection of a P3 with the breathability of a P1 and can be used for more than one work shift. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently, which is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The masks offer protection against: Particles and nano-particles (ultra-fine dust), aerosols, biological agents, viruses. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033, FFP3 R D, with valve at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valveTextile straps to avoid trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological

Colour

price reduced

Respirators FFP2 NR with valve, vertically foldable | PP, economy pack

Colour

economy pack

New

BLS Respirators BLS O2 103V, FFP3 NR D, with valve

BLS Respirators BLS O2 103V, FFP3 NR D, with valveThe BLS O2 103V FFP3 NR D disposable filter mask guarantees respiratory protection against aerosols and solid particles. The cup-shaped design, the elasticated straps attached at four points and the external nose clip, which can be moulded to the face mask, ensure the best fit for most face types. The external nose clip can be optimally adapted to the nose profile. The exhalation valve reduces breathing resistance and reduces moisture inside the mask, making breathing safer even in humid or very hot workplaces. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. The shelf life of the mask is 10 years.Properties of BLS Respirators BLS O2 103V, FFP3 NR D, with valve at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testWith exhalation valve with low breathing resistanceFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols

Colour

New

Moldex Air Respirators 3105, FFP2 R D, with Ventex®-valve

Moldex Air Respirators 3105, FFP2 R D, with Ventex®-valveWhat is important for a respirator to be worn at work? 1. the FFP mask must protect and also be comfortable 2. breathing should feel almost like breathing without an FFP mask 3. the FFP mask should be cost-effectiveWe have combined and perfected these points in our new, reusable generation of Air FFP masks. The AirWave® high-performance filter, the soft, elastic and self-adjusting design, the reusability and the incredibly low breathing resistance make our Air masks the best FFP respiratory protection for you and/or your employees! The pleated filter design reduces inhalation resistance by more than 50% with better performance. The filter area is 260% larger.Our DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions. The nose seal lip improves the seal fit and offers optimum wearing comfort. Protected from dust and dirt, hygienically packaged until use.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.With Ventex Klimaventil®: exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and humidity. Continuous straps: Enables fine adjustment of the distribution of traction on the head. With knitted band: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.The product and packaging are 100% PVC-free.Air FFP masks provide reliable protection against particlesFilter/layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA)Comfort sealing lip, clip: PolyethyleneStraps: Polyester, LycraClimate valve®: Natural rubberProperties of Moldex Air Respirators 3105, FFP2 R D, with Ventex®-valve at a glance:incredibly low breathing resistancereusableclimate valve® facilitates inhalation and exhalationDolomite dust testwith knitted strap and clip fastener for high wearing comfortreliable protection against dust, aerosol and smoke

Colour

New

BLS Respirators 680next, FFP2 NR D, with valve

BLS FFP2 NR D, respiratory masks 680nextThe FFP2 respirator BLS 680next is a 2-fold folded respirator. It is available in 2 different sizes, offering the perfect fit. With a low breathing resistance exhalation valve that allows exhaled air to escape more easily and ensures a high level of comfort for the user, making the filtering facepiece suitable for hot, humid working environments. The internal nose clip allows the mask to be optimally adjusted in the nose area. The textile elastic straps are made of a hypoallergenic, latex-free material and offer a secure and optimal fit and prevent hair from getting caught. Designed as a disposable mask (NR = Not Reusable), the mask has a dolomite dust test. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The addition of an innovative inner core gives the filter mask strength and high breathability combined with low breathing resistance. The mask has a shelf life of 10 years!Features of the BLS FFP2 NR D, 680next respirators at a glance:2-fold folded design for particularly low breathing resistanceDolomite dust testWith exhalation valve with low breathing resistanceTextile straps made of hypoallergenic, latex-free materialHygienic individual packagingShelf life of the mask: 10 yearsProtection against dusts/smoke/aerosols of particles of medium toxicity in concentrations

Colour

Respirators FFP2 NR, horizontally foldable made of PP in the oblique view

Respirators FFP2 NR, horizontally foldable | PP

Respirators FFP2 NR, horizontally foldable made of PP by Hygostar These respirators of category FFP2 NR are of very high quality. They protect against solid and liquid harmful dusts, smoke and aerosols. In addition, FFP2 masks reduce the absorption and transmission of infectious agents. With FFP2 NR respirators, you also meet strict requirements in sensitive hygiene areas. The masks are suitable for use in medicine, laboratories, nursing, hospitals as protective equipment, industry and food production. Thanks to the head straps, the protective masks fit very tightly and comfortably - no pressing behind the ears. The integrated nose clip is mouldable - for a very good seal and high wearing comfort. Features of the respirators FFP2 NR, horizontally foldable at a glance: high-quality PP fleece, folded horizontally with headband for a firm fit with mouldable noseband free of latex, FFP 2 NR reduces the absorption and transmission of infectious agents very comfortable even when worn for long periods protection against solid and liquid harmful dusts, smoke and aerosols

Colour

New

BLS Respirators Zer030 NV, FFP3 R D

BLS Respirators Zer030 NV, FFP3 R DThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents fabric clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, placed inside between the layers of filter material, adapts perfectly to the nose and eye profile, ensuring good vision and maximum compatibility with eyewear. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. The shelf life of the masks is 10 years!Features of the BLS Respirators Zer030 NV, FFP3 R D at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valvelIntegrated nose wing and welded strapsSimple, intuitive useShelf life of the mask: 10 yearsProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

Colour

Respirators FFP3 NR, horizontal foldable made of PP in front view

Respirators FFP3 NR, horizontally foldable | PP

Respirators FFP3 NR, horizontally foldable made of PP The FFP2 NR respirators are very high quality and made in France. The high quality is immediately noticeable due to the lower breathing resistance. Thanks to the very good fleece material, breathing in and out is much easier than with comparable masks. The respirators are made of breathable, soft PP fleece and meet the highest filter level FFP3. This means that the masks protect against toxic and harmful dusts, smoke and aerosols. FFP3 masks also reduce the absorption and transmission of infectious agents. FFP3 NR respirators are for single use. This is what the abbreviation NR = not reusable stands for. The masks are folded horizontally and are less expensive than complex masks with preformed cups. Thanks to the head straps, the folding masks are very comfortable to wear. Nothing presses behind the ears here. These FFP3 protective masks are ideal for medicine, laboratory, nursing, hospital as protective equipment, industry, food industry and hygiene-sensitive areas. Advantages of the respirators FFP3 NR, horizontally foldable at a glance: premium mask made in France high quality PP-fleece, soft and breathable horizontally folded with headbands and therefore very comfortable to wear latex-free comfortable and ideal for long wear reduces the absorption and transmission of infectious agents

Colour

breathe easier

New

BLS Respirators O2 102, FFP2 NR D

BLS Respirators O2 102, FFP2 NR DThe BLS O2 102 disposable respirator offers respiratory protection against solid particles and aerosols. The cup shape, the four-point elasticated strap and the nose clip that can be adapted to the filter material ensure excellent adaptability to most face shapes. The special shape of the moulded respirator offers increased wearing comfort thanks to reduced breathing resistance. The external nose clip adapts perfectly to the nose profile and ensures good vision, even for spectacle wearers. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. Shelf life of the mask: 10 years.Properties of BLS Respirators O2 102, FFP2 NR D at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testwithout exhalation valveFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols

Colour

Respirators FFP1 NR with valve cup-shaped made of PP in white

Respirators FFP1 NR with valve, cup-shaped | PP

Respirators FFP1 NR with valve, cup-shaped made of PPFFP1 respirators protect against non-toxic and non-fibrogenic dusts. They are ideal as protective equipment for workers in industry, food production and other hygiene-sensitive areas. The FFP1 NR respirators are cup-shaped, ergonomic cups. As a result, they fit particularly well and seal very well at the edges. FFP1 masks have an integrated exhalation valve. It eases resistance when exhaling and ensures greater wearing comfort - over a long period of time. The respirators are made of high-quality PP material and have comfortable overhead straps - no pressing behind the ears.Features of the respirators FFP1 NR with valve, cup-shaped at a glance:high-quality, soft PP fleecewith valve for easier breathingcup shapedtight fit thanks to ergonomic fitwith latex-free head band, nothing presses behind the earstight fit thanks to adjustable nosebandsoft nose pillow

Colour

New

BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve

BLS Respirators Zer032 C flame retardant, FFP3 R D, with valveThe new series of BLS moulded masks has been designed to offer you both: Maximum protection and maximum comfort. The mask offers flame protection and is therefore ideal for welding work. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elasticated straps makes it easy and secure to fit all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odours caused by organic and acid gases and vapours, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. Suitable against gases and vapours that are organic as well as acidic with concentrations lower than TLV.Properties of BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve at a glance:with flame protectionIdeal for welding work (even with by-products such as ozone)Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapours with concentrations below the TLV limit valueIntegrated nose flap and adjustable strapsWith sealing tape to effectively prevent leaks, even with most bearded wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

Colour

New

Moldex Air Respirators 3100, FFP2 R D

Moldex Air Respirators 3100, FFP2 R DWhat is important for a respirator to be worn at work? 1. the FFP mask must protect and also be comfortable 2. breathing should feel almost like breathing without an FFP mask 3. the FFP mask should be cost-effectiveWe have combined and perfected these points in our new, reusable generation of Air FFP masks. The AirWave® high-performance filter, the soft, elastic and self-adjusting design, the reusability and the incredibly low breathing resistance make our Air masks the best FFP respiratory protection for you and/or your employees! The pleated filter design reduces inhalation resistance by more than 50% with better performance. The filter area is 260% larger.Our DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions. The nose seal lip improves the seal fit and offers optimum wearing comfort. Protected from dust and dirt, hygienically packaged until use.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.Full-length straps: Allows fine adjustment of the distribution of tension on the head. With knitted strap: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.The product and packaging are 100% PVC-free.Air FFP masks provide reliable protection against particlesFilter/layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA)Comfort sealing lip, clip: PolyethyleneStrap: Polyester, LycraProperties of Moldex Air Respirators 3100, FFP2 R D at a glance:low breathing resistancereusablewithout valveDolomite dust testwith knitted strap and clip fastener for high wearing comfortReliable protection against dust, aerosol and smoke

Colour

New

Moldex Classic Respirators 2405, FFP2 NR D, with Ventex®-valve

Moldex Classic Respirators 2405, FFP2 NR D, with Ventex®-valveEven our basic version has all the product advantages that make Moldex FFP masks so successful. The flexible ActivForm® 3D design automatically adapts to the shape and movements of the face. As a result, Moldex masks fit tightly and comfortably, easily and without a nose clip. Our DuraMesh® mask grid keeps FFP masks in shape even under the toughest conditions. A soft, skin-friendly inner fleece provides additional comfort. A bag protects the individually packed masks in the packaging from dust and moisture. With Ventex Climate Valve®: Exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and moisture. Full-length straps: Allows fine adjustment of the distribution of tension on the head. Made in Europe: All Moldex FFP masks are 100% manufactured in Europe. Product and packaging are 100% PVC free.The FFP2 mask provides reliable protection against hazardous dusts and biological agents in risk group 2 and has also passed the dolomite dust test. The mask is not reusable and must be disposed of after use.Filter layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA) strapping, Klimaventil®: natural rubberProperties of Moldex Classic Respirators 2405, FFP2 NR D, with Ventex®-valve at a glance:safe and comfortable thanks to ActivForm® 3D designDuraMesh® mask grid keeps the mask in shapeClimate valve® makes breathing in and out easierDolomite dust testreliable protection against particles

Colour

New

BLS Respirators Zer033 NV, FFP3 R D

BLS Respirators Zer033 NV, FFP3 R DThe double-folded FFP3 respirator BLS Zer0 33 Flat is a high-end mask that offers maximum protection against: Particles and nanoparticles (ultra-fine dust), aerosols, biological agents, viruses. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently. This is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033 NV, FFP3 R D at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceTextile straps to prevent trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

Colour

New

Moldex Air Plus Respirators 3408, FFP3 R D, with ProValve

Moldex Air Plus Respirators 3408, FFP3 R D, with ProValveAir Plus FFP masks have an anatomically moulded TPE sealing lip, similar to that of a half-face gas mask. This provides a particularly comfortable seal and can be wiped clean and disinfected. Air Plus masks can be used multiple times, reducing waste and overall costs. The AirWave® pleated filter technology allows a particularly large filter area to be accommodated in the masks. As a result, they have long-lasting low breathing resistance for easy breathing: the pleated filter design reduces inhalation resistance by up to 50% with better performance. A skin-friendly fleece on the inside of the mask and the adjustable, wide knitted strap promise additional wearing comfort. Our flexible ActivForm® 3D design automatically adapts to the shape and movements of the face. Air Plus FFP masks fit tightly and comfortably, easily and without a nose clip. The DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.With ProValve: Integrated valve - minimises condensation droplets from breathing air. Length-adjustable strap: Enables fine adjustment of the distribution of tension on the head. With knitted strap: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.Product and packaging are 100% PVC free.Air Plus FFP masks provide reliable protection against particlesFilter layer, inner layer, DuraMesh®: Polypropylene, ethylene vinyl acetate (EVA)Clip: PolypropyleneComfort sealing lip: Thermoplastic elastomers (TPE)Strap: Polyester, LycraProValve: Polypropylene, synthetic rubberProperties of Moldex Air Plus Respirators 3408, FFP3 R D, with ProValve at a glance:Easy breathing thanks to large filter surfaceReusable due to washable sealing lip and long-life filterwith integrated ProValve to minimise condensation in the exhaled airDolomite dust testWith knitted strap and clip fastener for high wearing comfortReliable protection against particles

Colour

New

BLS Respirators Zer031 C, FFP3 R D, with valve

BLS Respirators Zer031 C, FFP3 R D, with valveThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odors from organic and acid gases and vapors, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses.Features of the BLS Respirators Zer031 C, FFP3 R D, with valve at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapors with concentrations below the TLV limit valueIntegrated nose flap and welded strapsWith sealing tape to effectively prevent leaks, even with most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

Colour

Face masks for single use - breathing through safely and comfortably

Face masks belong to PPE (personal protective equipment) just like protective gloves or protective clothing. Especially in industry and trade, there are often jobs where respiratory toxins can arise. These can be, for example, chemical substances, dust and bacteria that occur during cleaning or sanitation work. A face mask provides reliable protection against these hazards.

Are you unsure which mask is best for you? Watch our product video to learn more about the features and benefits of each mask.

Face masks are basically divided into two groups:

Full masks: these are worn, for example, in the military or by firefighters. Colloquially, this type of respiratory protection is known as a gas mask or ABC mask.

Half masks: Half masks are the most common face masks in industry and trade. They are made of fleece and filter out harmful substances from the air breathed. Therefore, they are technically referred to as filtering half masks or fine dust masks. These protective masks are intended for single use and cannot be reused. This is why the abbreviation "NR" stands for "Not Reusable" in the type designation of the face mask.

Filtering half masks protect against solid particles and liquid aerosols (liquid droplets). The mask consists of several layers of fleece and a special filter medium. This filter is electrostatic and binds the particles in the face mask. The harmful particles are therefore not inhaled. As this filter layer absorbs more and more of these particles during use, breathing resistance increases, i.e. breathing becomes more difficult. The mask must then be changed. It is intended for single use only and should be worn for a maximum of one working day.

Franz Mensch uses particularly high-quality fleece materials to keep breathing resistance as low as possible. For even more comfort, there are fine dust masks with a valve. It reliably prevents heat buildup and minimizes breathing resistance - for the best possible breathing experience.

Filtering half masks are part of PPE and are subject to the EN 149:2001 + A1:2009 standard. They are available in three filter classes.

Filter classes according to EN 149

FFP1 - for low risks - face masks of this group protect against solid and liquid particles, as well as non-toxic aerosols.

FFP2 - for medium risks - respirators of this category can be used against solid and liquid particles, non-toxic solid and liquid aerosols, against particles of carcinogenic substances, against bacteria, fungi and their spores.

FFP3 - for high risks - face masks of FFP3 category protect against solid and liquid particles, against highly toxic solid and liquid aerosols, against particles of carcinogenic substances, against bacteria, fungi and their spores, against viruses, enzymes and against radioactive particles

Hygostar respiratory protection - first-class wearing comfort and maximum safety

extra soft inner material and soft nose cushion
liquid repellent upper material
malleable nosepiece for optimal fit
minimal breathing resistance for comfortable breathing
certified quality with excellent test results for safe protection

Your Franz Mensch team will also be happy to advise you by telephone on any questions you may have about respiratory protection. Simply call +49 8241 / 9633-0.