Mob caps Detect | PP, detectable

Oversleeves made of PE, detectable by Hygostar These detectable oversleeves are made of high-quality PE. They have a detector strip on the inside and can thus be detected by a detector machine. Detectable oversleeves are used as hygiene clothing for the forearms in the food industry. They are also ideal for other hygiene-sensitive areas and industry. They are water-repellent and durable. Features of the detectable oversleeves made of PE at a glance: water-repellent, strong polyethylene protection against minor superficial mechanical risks covers the forearms, can be flexibly replaced durable and food-safe with detector strip on the inside with latex-free rubber bands on both ends for a firm hold

TPE gloves Allfood Thermosoft by Hygostar The TPE glove Allfood Thermosoft is powder-free and soft in the same way as vinyl and significantly cheaper than gloves made of nitrile. TPE stands for thermoplastic elastomers and assures the Allfood Thermosoft's absence of latex-allergenic proteins. It is suitable for handling any type of food, even those containing oil and grease. In addition, the disposable glove proves to be waterproof and offers ideal protection for short-term work. The features of the TPE gloves Allfood Thermosoft at a glance: soft TPE, hygienic, powder-free 2 in 1 advantage: soft like vinyl, favourable compared to nitrile suitable for oily and greasy foods free of latex-allergenic proteins with smooth surface, robust can be worn on both hands, good fit, non-sterile

Overshoes made of CPE, detectable by Hygostar The detectable overshoes are made of CPE. CPE is water-repellent like PE and has a hammered structure. The disposable overshoes protect your shoes from moisture and minor mechanical risks. The detector strip on the inside makes the overshoes detectable to a detector machine. They can be detected as foreign objects if they ever get into production. Detectable overshoes made of CPE are ideal for very sensitive hygiene areas in the food industry. Features of the detectable overshoes made of CPE at a glance: made of cast polyethylene, water-repellent detectable thanks to integrated detector strip inside food safe hard-wearing and firm with elastic band at the end of the shaft for a good grip protection against low superficial mechanical risks

Face masks type II, 3-ply made of PP from Hygostar This medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer. The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity. Hygiene with colour system: surgical mask and mouthguard also in black or pink At Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications. Advantages of the face masks type II, 3-ply at a glance: 3-layer, soft PP fleece filter performance of 98 % BFE can be worn behind the ear with elastic bands, latex-free integrated nose clip, anatomically formable for a good fit for single use for external protection (protection against droplet infection) in the hospital and care sector pharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces) Suitable wall holder for mouthguard boxes: art.-no. 88934: Stainless steel mouth guard dispenser Materialinfo: What is PP? PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off. What is a medical face mask type II? Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission. Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE): Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids. Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air. Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.

Visitor gowns Light with push buttons made of PP by Hygonorm These disposable fleece gowns are among the most popular gowns at Franz Mensch. They are universally applicable for visitors or staff and are simply worn over normal clothing. The PP visitor gowns are food-safe and ideal for sensitive areas in food production, gastronomy and industry. The visitor gowns Light are made of air-permeable PP fleece and are very pleasantly light to wear. They can be closed at the front with push buttons and are equipped with latex-free elastic bands at the wrists for a good hold. The disposable gowns are available in many sizes and colours and are ideal for colour-coding different hygiene areas. With a hygiene colour system, you visually separate work areas and avoid cross-contamination: 1 colour = 1 area, e.g. blue disposable gowns for visitors, white gowns for staff, yellow gowns for cleaning staff, etc. Your advantage at Franz Mensch: Here you buy visitor gowns made of non-woven directly from the manufacturer and benefit from very attractive prices - also large quantities available. Hygiene with colour system: PE aprons in blue, yellow, red, black and much more Blue and white disposable aprons are available everywhere. But at Franz Mensch you can also get green, yellow, black and red disposable aprons. The many colours are ideal for using a hygiene colour system: 1 area = 1 colour. With coloured hygiene clothing you visually separate different work areas from each other. The system is simple and effective. Cross-contamination is prevented.   PE-disposable aprons on roll (art.-no. 23170) Nitrile gloves Safe Light (art.-no. 27059) Oversleeves Light PE (art.-no. 28209) Overshoes CPE (art.-no. 28500)   Matching dispensers and wall holders for disposable gown: art.-no. 88950: Double dispenser for disposable clothing made of acrylic art.-no. 88938: Dispenser for coats and overalls made of stainless steel Features of the visitor gowns Light with push buttons at a glance: PP fleece, air permeable and easy to wear with push buttons and stand-up collar arm closure with latex-free elastic bands food safe wide choice: 5 colours and up to 6 sizes protection against low superficial mechanical risks favorable manufacturer prices individually and hygienically packed in PE bag

Multidispenser for caps, oversleeves and overshoes made of stainless steel by Hygostar The wall holder is a real multi-talent. It can be customised with loose disposable clothing. Whether overshoes, caps or sleeve covers: the multi-purpose dispenser stores consumables safely and hygienically. The dispenser is made of stainless steel and is easy to fill via the top lid. The front consists of a transparent Plexiglas window. This allows you to see at a glance what is in the dispenser and what the fill level is. The front also has a removal opening so that the clothing can be removed individually and kept ready to hand at all times. The multi-dispenser is suitable for use in hygiene areas or changing rooms in the food industry, catering, industry and medicine.   Advantages of the Multidispenser made of stainless steel at a glance: hygienic stainless steel dispenser for disposable clothing can be filled as required with caps, sleeve protectors or overshoes transparent plexiglass front fill level and contents visible at all times with removal opening

Dispenser for caps made of stainless steel by Hygostar This wall holder is ideal for clip caps, bouffant caps and all other types of disposable caps. The bonnets can be filled loosely into the dispenser via the top lid and remain hygienically stored until use. The dispenser is made of stainless steel. Stainless steel is a particularly suitable material for hygienic areas because it is very easy to clean and disinfect. The removal opening with the rubber rim makes it easy to pull out the bonnets. The opening measures approx. 26 cm x 4 cm.   Advantages of the dispenser for caps made of stainless steel at a glance: wall holder for all types of loose caps made of stainless steel can be filled as required via the top lid rubberised removal opening on the front

Double dispenser for disposable clothing "Double" | Acrylic This model is a real multidispenser. It can be used for bonnets, protective sleeves, gowns but also for overalls. The inclined lid helps to remove the products quickly, as the contents slide forward. Properties of double dispenser for disposable clothing "double" at a glance: Acryl, robust lid made of PET individually divisible by partition wall, 3 positions inclined lid prevents dust deposit quick removal thanks to inclined bottom, content slides to the front

Bulk dispenser Smart made of stainless steel from Hygostar The bulk dispenser Smart is an easy-to-clean housing for fast dispensing of small parts. On the front side is an opening for simple distributing of the contents, which can be e.g. earplugs, clip-on hoods or various other small objects. The features of the bulk dispenser Smart made of stainless steel: easy to clean front opening for removal fillable with e.g. earplugs or clip-on hoods

Acrylic multidispenser from Hygostar This multidispenser is perfect for disposable gloves, hoods, overshoes and also sleeve protectors. You can store versatile all your loose hygiene clothing in this dispenser. This keeps them hygienically stored and always at hand for employees or visitors in your business. The multidispenser is made of transparent, shatterproof acrylic glass, so you can always see the contents and fill level. Acrylic is a plastic that is much lighter and more robust compared to real glass. The dispenser is simply filled from the top via the lid. The lid made of solid PET is particularly stable and specially designed for daily opening and closing. The technology with the internal hinge allows the flap to close tightly and ensures that the contents remain protected from dirt. Features of the acrylic multidispenser at a glance: consists of acrylic glass unbreakable and light transparent for checking the filling level Opening of the lid facilitates the opening of the lid lid made of PET with internal hinge hygienic storage for all loose gloves, hoods, sleeve protectors, overshoes etc.