Skip to main content
✔ 10,000 articles for protection, hygiene & packaging
✔ top price-performance ratio
✔ ready to ship in 24h
✔ tested quality
Similar articles
Disposable hoods | microporous
Disposable hoods made of microporous by Hygostar These disposable hoods are an ideal addition to gowns and coveralls when the head and shoulder area needs extra protection. The disposable hoods are made of special microporous fabric and protect against weakly aggressive cleaning agents and against moisture. The material has a functional membrane that makes the hoods water repellent and breathable at the same time. The disposable hoods are widely used in industry and sensitive hygiene areas. The features of the disposable hood at a glance: special fabric with functional membrane water repellent and breathable covers head and shoulders face rubber for a good fit, latex-free for protection against weakly aggressive cleaning agents and against prolonged contact with liquids
Colour
not available From €36.15 100 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
Colour
not available From €4.60 1 Stück
DuPont™ Tyvek® 500 Hood PH30L0
DuPont™ Tyvek® 500 Hood PH30L0The hood features a wide collar and elastic bands on the face and neck for improved protection. It was developed to protect particularly exposed areas and is at the same time permeable to air and water vapor as well as repellent to water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Hood PH30L0 at a glance:Hood with wide collar and elastic bands at the face opening and neckis intended to provide even better protection for particularly exposed parts of the bodypermeable to air and water vapor repellent to water-based liquids and spray mist
Colour
not available From €1.03 1 Stück
DACH SAFE® Cleanroom hood 180W, machine-made
DACH SAFE® Cleanroom hood 180W, machine-madeThe DACH SAFE Cleanroom Hood 180W is a machine-manufactured hood specifically designed for use in cleanrooms of classes 5-9. It consists of a headpiece, two side panels and a shoulder cover, which are carefully sewn together with overlock seams. This construction ensures that the wearer’s freedom of movement remains unrestricted and that the hood does not slip, even during intensive activity. Elastic bands at the junction between the headpiece and shoulder cover, as well as in the facial area, guarantee an optimal fit and provide secure protection, particularly against hair becoming entangled in the immediate working environment. The hood has been tested for particle emission under heavy mechanical stress and has also proven to be reliable for cleanroom use during intensive physical activity, as confirmed by the Helmke Drum Test, Category II.Properties of DACH SAFE® Cleanroom hood 180W, machine-made at a glance:machine-manufactured hood for cleanrooms of classes 5-9headpiece, side panels and shoulder cover with overlock seams for secure holdunrestricted freedom of movement, no slipping even during intensive activityelastic bands at the head and shoulder area as well as in the face for optimal fit and protectiontested for particle emission and confirmed by Helmke Drum Test Category II
Colour
not available From €0.27 1 Stück
DACH SAFE® Cleanroom hood 181W, with lint-free seam
DACH SAFE® Cleanroom hood 181W, with lint-free seamThe DACH SAFE Cleanroom Hood 181W with lint-free seams has been specially developed for use in cleanrooms of classes 5-9 and offers reliable protection while ensuring a high degree of freedom of movement. The hood consists of a headpiece, two side panels and a shoulder cover, all finished with lint-free overlock seams. This construction prevents slipping even during intensive physical activity and ensures a stable fit. Elastic bands at the junction between the headpiece and shoulder cover, as well as in the facial area, guarantee an optimal fit and effectively protect against hair becoming entangled in the immediate working environment. The shoulder cover provides additional protection for the upper body area. The suitability for cleanroom use has been confirmed by the Helmke Drum Test, Category II, even under heavy mechanical stress.Properties of DACH SAFE® Cleanroom hood 181W, with lint-free seam at a glance:lint-free overlock seams for a stable fit without slippingsuited for cleanrooms of classes 5-9elastic bands at the head and facial area for optimal protectionadditional shoulder cover for extended particle protectionsuitability for cleanroom use confirmed by Helmke Drum Test Category II
Colour
not available From €0.27 1 Stück
DACH SAFE® TriCap 126W, Cleanroom hood 3 in 1
DACH SAFE® TriCap 126W, Cleanroom hood 3 in 1The DACH SAFE TriCap 126W Cleanroom Hood 3 in 1 has been specially developed to minimise particle contamination in the cleanroom and ensure the highest hygiene standards. Thanks to the extra-thin and breathable nonwoven fabric, the hood offers optimal wearing comfort without compromising its protective function. The innovative design allows for three different wearing options, so the face can be left completely uncovered, only the eye and nose area, or just the eye area. Wearing a respiratory mask is also possible without any problems.The antistatic material reliably prevents electrostatic discharges, thus minimising the risk of sparking when removing the hood. The TriCap 126W is suitable for use in ISO cleanrooms of classes 4–9 according to EN 14644-1 and can be used as a beard cover. Thanks to the high-quality nonwoven fabric and covered facial design, it is the ideal solution for demanding cleanroom applications.Properties of DACH SAFE® TriCap 126W, Cleanroom hood 3 in 1 at a glance:versatile, extra-thin and breathable nonwoven fabricantistatic material prevents electrostatic dischargessuitable for ISO cleanrooms of classes 4–9 according to EN 14644-1can be easily combined with a respiratory maskcan be used as a beard cover
Colour
not available From €0.19 1 Stück

Hood Typ PB 6B | microporous

The disposable hoods are made of multi-layer, microporous fleece, which forms a highly effective barrier against water-based liquid splashes, dust and microorganisms while remaining breathable. The half-shoulder length cut covers the head, neck and upper shoulder area without restricting mobility. A circumferential, latex-free elasticated band ensures a tight, non-slip fit. The material is antistatic (EN 1149-5), tear and abrasion resistant and low-linting - ideal for cleanrooms, pharmaceutical production or food processing. PPE certification CAT III according to type PB 6B and infection protection according to EN 14126 guarantee standard-compliant safety.

Properties of Hood Typ PB 6B | microporous at a glance:

  • CAT III / EN 13034 PB 6B certified
  • Air-permeable barrier material – no heat build-up
  • Half-shoulder design protects neck & shoulders
  • latex-free all-round elasticated band, secure fit
  • antistatic finish in accordance with EN 1149-5
  • low-linting & clean – cleanroom compatible

Properties

Type of inner packaging: PE
Type of outer packaging: cardboard
material: Microporous
Norms:

Certifications / Standards

CE 0624
CAT 3 - Personal protective equipment category 3
EN 14126:2003+AC:2004 - Protective clothing against infectious agents
EN 13034:2005+A1:2009 type PB 6B - Protective clothing against liquid chemicals type PB 6B (Partial body protection)
EN 14325 - Protective clothing for protection against chemicals
EN 13688 - General requirements for protective clothing
Chemical protection
EN 1149-5 - Protective clothing - Electrostatic properties part 5
product information
Do not reuse

Overview all norms of Hood Cat. III Typ PB 6B | microporous

                   

Download all documents for your product here:

Declaration of conformity for personal protective equipment
Further documents

For completed orders you can also download all documents collected in your order overview!

Buy together with
Beard cover Micromesh | nylon, detectable
Beard cover Micromesh made of nylon, detectable by Hygostar This detectable beard protector is a particularly comfortable variant. The beard protector consists of high-quality, very fine micro-meshes made of nylon. Nylon is elastic, soft and comfortable on the skin for a long time - without skin irritation or cutting in. The Micromesh beard protector is equipped with a detector strip. This means that it can be recognised by detectors if it ever gets into production - high safety and hygiene for your company. The detectable beard protector is ideal for particularly hygiene-sensitive sectors such as the food industry. Features of the beard cover Micromesh at a glance: micro mesh made of high quality nylon extra soft and light, air-permeable with detector strips latex-free elastic bands protection against minor mechanical risks in a practical dispenser box
Colour
not available From €22.45 100 Stück
DACH Neolution®Air Loop 253W, Filter mask FFP2 NR D & Type IIR, with ear loops
DACH Neolution®Air Loop 253W, Filter mask FFP2 NR D & Type IIR, with ear loopsThe DACH Neolution Air Loop 253W is an FFP2 NR D filter mask and medical face mask with ear loops, offering optimal fit and high wearing comfort thanks to its innovative three-part design. High-quality materials and modern high-tech filter material ensure very high filtration efficiency against solid and liquid aerosols, while maintaining extremely low breathing resistance. The mask’s flexible segments adapt to jaw movements during speech, ensuring a consistently tight seal. Elastic, wide ear loops allow for easy donning and removal and sit comfortably around the ear without cutting in.The Neolution Air Loop 253W is certified as FFP2 NR D according to EN 149:2001+A1:2009 and as Type IIR according to EN 14683:2019+AC:2019, meeting the highest standards of protection and hygiene. It is Made in Germany, passes the voluntary dolomite dust loading test, and, having passed the Helmke Drum Test, is suitable for cleanrooms of ISO classes 3–9. This makes it ideal for use in sensitive areas and under extreme conditions.Properties of DACH Neolution®Air Loop 253W, Filter mask FFP2 NR D & Type IIR, with ear loops at a glance:innovative three-part design for optimal fit and comforthigh filtration efficiency against solid and liquid aerosols with very low breathing resistanceelastic, wide ear loops for comfortable wear without cutting incertified according to EN 149 FFP2 NR D and EN 14683 Type IIRsuitable for cleanrooms and extreme conditionsMade in Germany
Colour
not available From €0.60 1 Stück
price reduced
Visitor gowns with zipper, stand-up collar | SMS
Visitor gowns with zipper made of SMS by HygostarThese high-quality visitor gowns are made of SMS. SMS consists of three layers: Top and bottom made of PP fleece and in between a layer of meltblown. Thanks to this composition, disposable gowns made of SMS are slightly water-repellent and noticeably more comfortable than pure PP gowns. They always provide a high level of comfort and a pleasant feeling even when worn for long periods. The gowns are ideal for visitors and employees in industry and other hygiene areas.Features of the visitor gowns with zipper made of SMS at a glance:high-quality gown made of SMS materialair-permeable for high wearing comfortslightly water-repellentwith front zipper and stand-up collarsleeves with knitted cuffsprotection against low superficial mechanical risks
Colour
not available From €130.50 100 Stück
DuPont™ Tyvek® 500 Apron PA30L0
DuPont™ Tyvek® 500 Apron PA30L0The calf-length apron made of Tyvek® offers a comfortable and secure fit with its straps in the neck and back area. With a length of 108 cm, it is ideal for reliably protecting particularly exposed parts of the body. Its air and water vapor permeable properties make it comfortable to wear while also repelling water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Apron PA30L0 at a glance:Calf-length apron with ties in the neck and back areaLength: 108cmis intended to provide even better protection for particularly exposed parts of the bodypermeable to air and water vapor repellent to water-based liquids and spray mist
Colour
not available From €1.75 1 Stück
price reduced
Shoe cover Typ PB 6B | microporous
Shoe cover Typ PB 6B | microporousThe Overshoes are made of microporous film construction keep dust, dirt and light chemical splashes away from your shoes and at the same time prevent particles from entering sensitive areas. The material is soft, lint-free and breathable, and the elasticated band all the way round ensures quick, non-slip donning. PPE CAT III type PB 6B, antistatic in accordance with EN 1149-5 and infection protection EN 14126 – perfect for laboratories, clinics, cleanrooms or construction sites.Properties of Shoe cover Typ PB 6B | microporous at a glance:CAT III / PB 6B (EN 13034)microporous film protects shoes from contaminationlatex-free round gum entry – quick ütighteninglow-linting & quiet – cleanroom class ISO 7Water-repellent surface, EN 14126 infection protectionOne-time use – no reprocessing required
Colour
not available From €11.20 100 Stück
More from this brand
CoverPremPro Chemical safety coverall Typ 3B+4B+5B+6B | PP/PE
CoverPremPro Chemical safety coverall Typ 3B+4B+5B+6B | PP/PEThe CoverPremPro disposable coverall was developed for situations with a high risk potential. The laminated PP/PE material offers liquid-tight (Type 3B), spray-tight (Type 4B) and particle-tight (Type 5B/6B) protection. Strong welded seams, a double zip cover and the 3-panel hood prevent the penetration of aggressive chemicals. Elasticated cuffs at the waist, arms and ankles optimise the fit, while the generous cut allows maximum freedom of movement. Antistatic according to EN 1149-5, infection protection EN 14126 and protection against radioactive contamination (EN 1073-2) – ideal for decontamination, emergency and chemical operations.Properties of CoverPremPro chemical protection suit Type 3B+4B+5B+6B | PP/PE at a glance:CAT III – Type 3B / 4B / 5B / 6Bmask not included in the deliveryhigh-performance PP/PE with welded seamsdouble flap over 2-way zip3-piece hood, mask-compatibleelasticated waist, sleeves & ankles – tight sealstatic dissipative, virus & radioisotope safe
Colour
not available From €6.45 1 Stück
Bib aprons Typ PB 6B | microporous
Bib aprons Typ PB 6B | microporousThis bib apron made of high-quality microporous fleece combines effective splash and particle protection (type PB 6B) with high breathability. The material allows water vapour to escape and at the same time reliably wicks away liquids, blood or oil. With a length of 102 cm, the apron protects the entire front area up to below the knee. Adjustable ties at the neck and waist enable a secure, customised fit and quick donning and doffing. Antistatic properties in accordance with EN 1149-5 and EN 14126 infection protection make it the ideal choice for laboratories, cleanrooms, the food industry and facility services.Properties of Bib aprons Typ PB 6B | microporous at a glance:CAT III / PB 6B (EN 13034)microporous film blocks blood, oil and chemicals102 × 72 cm – protection up to below the kneeenclosed neck & waist;antistatic EN 1149-5, protection against infection EN 14126soft, pleasant to the touch – for long layers
Colour
not available From €46.25 100 Stück
Labcoat with knitted cuffs Typ PB 6B | microporous
Labcoat with knitted cuffs Typ PB 6B | microporousThe lab coat combines outstanding barrier performance with ergonomic design. The microporous fleece blocks liquid splashes and solid particles while remaining breathable. A concealed zip fastener makes it quick to put on and take off, while soft knitted cuffs create a tight transition to gloves. The classic shirt collar prevents pressure points and ensures a neat appearance. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection protection according to EN 14126 - ideal for laboratories, pharmaceuticals and biotech.Properties of Labcoat with knitted cuffs Typ PB 6B | microporous at a glance:CAT III / PB 6B in accordance with EN 13034breathable multi-layer film, low-lintingconcealed zip – no hangingknitted bandszip - no catchingantistatic ESD-compliant (EN 1149-5)lightweight, snug – comfortable for long periods of wear
Colour
not available From €1.36 1 Stück
price reduced
Sleeve Typ PB 6B | microporous
Sleeve Typ PB 6B | microporousThe 40 cm long arm sleeves offer additional forearm protection during activities involving splashes or dust. The microporous fleece blocks liquid splashes and hazardous particles while allowing body moisture to escape. Latex-free rubber bands at the top and bottom ensure a secure, non-slip seal. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection protection EN 14126 – ideal for pharmaceuticals, chemicals and cleaning.Properties of Sleeve Typ PB 6B | microporous at a glance:CAT III / PB 6B – tested forearm protection40 cm long, fits over gowns & jacketsAir permeable despite splash barrier latex; air-permeable despite splash barrierlatex-free rubber, no pinchingantistatic EN 1149-5, EN 14126for pharmaceuticals, maintenance, paint & cleaning
Colour
not available From €12.55 100 Stück
Shoe cover Typ PB 6B | microporous
Shoe cover Typ PB 6B | microporousThe Overshoes are made of microporous film construction keep dust, dirt and light chemical splashes away from your shoes and at the same time prevent particles from entering sensitive areas. The material is soft, lint-free and breathable, and the elasticated band all the way round ensures quick, non-slip donning. PPE CAT III type PB 6B, antistatic in accordance with EN 1149-5 and infection protection EN 14126 – perfect for laboratories, clinics, cleanrooms or construction sites.Properties of Shoe cover Typ PB 6B | microporous at a glance:CAT III / PB 6B (EN 13034)microporous film protects shoes from contaminationlatex-free round gum entry – quick ütighteninglow-linting & quiet – cleanroom class ISO 7Water-repellent surface, EN 14126 infection protectionOne-time use – no reprocessing required
Colour
not available From €11.20 100 Stück
Boot cover Typ PB 6B | microporous
Boot cover Typ PB 6B | microporousWhite overboots made of breathable microporous fleece protect shoes from light liquid splashes and hazardous particles. Elasticated cuffs at the opening and ankle guarantee a quick fit without slipping. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection-resistant according to EN 14126 - ideal for cleanrooms, laboratories and the food industry.Properties of Boot cover Typ PB 6B | microporous at a glance:CAT III / PB 6B – basic protectionmicroporös, stops spray & dustrubber top & at the ankle & lint-free, easy to clean;lint-free, low-linting – ISO class 7 suitableantistatic surface EN 1149-5disposable – hygienic & efficient
Colour
not available From €38.30 100 Stück