✔ 5.000 articles for protection, hygiene & packaging
✔ top price-performance ratio
✔ ready to ship in 24h
✔ tested quality

Face masks type II, 3-ply | PP, individually packed

Face masks type II, 3-ply | PP, individually packed

  • high-quality spunbonded PP, 3-ply
  • in hygienic individual packaging, ideal for handing out to staff and visitors
  • with latex-free ear loops
  • excellent filtering performance,98 % BFE
  • integrated nose clip, anatomically adjustable
  • for single use
 

Login now to get lower prices!
You are not yet a customer? Simply register and save directly!

 
Colour:
Variant selection:
Packaging unit:
 

Login now to get lower prices!
You are not yet a customer? Simply register and save directly!

 
Similar articles
Face masks type II, 3-ply | PP, economy pack
Face masks type II, 3-ply made of PP from Hygostar This medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer. The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity. Hygiene with colour system: surgical mask and mouthguard also in black or pink   The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.         Advantages of the face masks type II, 3-ply at a glance: 3-layer, soft PP fleece filter performance of 98 % BFE can be worn behind the ear with elastic bands, latex-free integrated nose clip, anatomically formable for a good fit for single use for external protection (protection against droplet infection) in the hospital and care sector pharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces) Suitable wall holder for mouthguard boxes: art.-no. 88934: Stainless steel mouth guard dispenser What is a medical face mask type II? Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission. Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE): Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids. Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air. Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
Colour
economy pack
Face masks Civil Use, 3-ply | PP, Made in Germany, economy pack
Face Mask Civil Use | PP (Made in Germany) by Hygostar The face mask "Civil Use" (Made in Germany) is exclusively produced and developed in Germany and consists of a polypropylene fleece. It has three layers and is very skin-friendly and lint-free thanks to this PP material. Optically it has white elastic bands, which are extra soft and padded. In addition, an integrated nose clip ensures an extremely comfortable fit. The face mask "Civil Use" made of PP is non-sterile, which is why it was not made for medical purposes, but for private use. This face mask should not be reused after use to ensure safety. Properties of the Face Mask Civil Use made of PP (Made in Germany): skin-friendly PP material, lint-free 3-ply made in Germany with white ear loops and integrated nose clip non-sterile: for private use cannot be used again comfortable to wear
Colour
economy pack
Face masks type IIR, 3-ply | PP, economy pack
Face masks type IIR, 3-ply made of PP by Hygostar The face mask type IIR is a surgical mask with an excellent filter performance of 98% BFE. The "R" in the designation indicates that the face mask offers additional splash protection, for example against contaminated liquids such as blood. The face mask therefore fulfils all requirements for medical use - also suitable for operating theatres. The face mask type IIR is 3-layered and made of high-quality PP fleece. The material is soft and comfortable to wear.  Advantages of the face mask type IIR, 3-ply at a glance: Particularly high quality, splash protection against contaminated liquids Proven filter performance of 98 % BFE as external protection against droplet infections 3-ply, high-quality PP material latex-free ear loops Integrated nose clip for a good fit For single use only
Colour
economy pack
Face masks type II, 3-ply | PP, ties
Face masks type II, 3-ply made of PP with ties by Hygostar The face mask type II is 3-layer and approved for medical use. The masks achieve an excellent filtering performance of 98% BFE. Thus, they are suitable as foreign protection in hospital, medical and nursing. The face mask covers the mouth and nose and protects against droplet infections. The masks are worn with tie straps. Simply tie at the desired length at the back of the head. Nice side effect: No pressure behind the ears and a comfortable wearing feeling over a long time. Features of the Face masks type II, 3-ply with ties at a glance: 3-layer medical mask made of PP fleece meets the "Type II" standard excellent filtering performance, 98 % BFE tie straps for tight fit, no pressure behind the ears malleable nosepiece, individually adjustable for single use for external protection in hospital and care areas, prevents droplet infection
Colour
Face masks type IIR, 3-ply | PP
Face masks type IIR, 3-ply made of PP by Hygostar The face mask type IIR is a surgical mask with an excellent filter performance of 98% BFE. The "R" in the designation indicates that the face mask offers additional splash protection, for example against contaminated liquids such as blood. The face mask therefore fulfils all requirements for medical use - also suitable for operating theatres. The face mask type IIR is 3-layered and made of high-quality PP fleece. The material is soft and comfortable to wear.  Advantages of the face mask type IIR, 3-ply at a glance: Particularly high quality, splash protection against contaminated liquids Proven filter performance of 98 % BFE as external protection against droplet infections 3-ply, high-quality PP material latex-free ear loops Integrated nose clip for a good fit For single use only
Colour
Face masks type II, 3-ply | PP, head band
Face masks type II, 3-ply made of PP with headband from Hygostar This disposable mask is worn with head straps and therefore offers optimum wearing comfort even during long periods of use. Your advantage: No pressure behind the ears as with comparable masks with ear loops. The elastic, latex-free rubber bands ensures a tight fit and good hold. The medical mouthguard is 3-ply and has an excellent filter performance of 98% BFE. It meets all the requirements of category "Type 2" and can be used as third-party protection in hospital and nursing. The mouthguard can therefore also be worn as a surgical mask and high-quality surgical face mask. The mouthguard type II with headgear is a disposable product and protects against droplet infections. Advantages of the face masks type II, 3-layer with headband at a glance: 3-ply, nonwoven material made of high-quality PP filter performance of 98 % BFE, corresponds to type II with elastic headband, no pressure behind the ears very good fit anatomically adjustable noseband optimum comfort with long wearing time for single use Suitable wall holder for mouthguard boxes: art.-no. 88934: Stainless steel mouth guard dispenser Materialinfo: What is PP? PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off. What is a medical face mask type II? Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission. Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE): Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids. Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air. Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II. Intended purpose For third-party protection (protection against droplet infection) in the hospital and care sector Functional range suitable for medical use
Colour
very comfortable
Buy together with
Respirators FFP2 NR, cup-shaped | PP
Respirators FFP2 NR, cup-shaped made of PP by Hygostar These FFP2 masks are high-quality respirators for single use. They are made of breathable PP fleece and have an ergonomic shape. Thanks to the preformed cup, the FFP2 NR respirators fit very well. The cups close particularly tightly at the edges and on the face. This increases the protective effect of the masks. The respirators are to be worn with headwear. This way of wearing is very comfortable, especially during long periods of use, because no rubber presses behind the ears. The soft nose cushion provides additional wearing comfort. The FFP2 masks protect against harmful dusts, smoke and aerosols. They are ideal for medicine, laboratory, nursing, hospital as protective equipment, industry, food industry and hygiene-sensitive areas. Features of the respirators FFP2 NR, cup-shaped at a glance: high-quality PP fleece, soft preformed, ergonomic cup for very tight fit with head band, very comfortable, no pressure behind the ears reduces the absorption and transmission of infectious agents flexible noseband, improves the fit soft nasal pillow
Colour
Nitrile finger cots | powder-free
Nitrile finger cots, powder-free by Hygostar The powder-free nitrile fingerling has a smooth surface and is rolled at the ends. One fingerling covers only one finger at a time. This makes it particularly suitable for work where the entire hand does not need to be protected. It has elastic properties that allow the wearer maximum mobility and also a excellent tactile sensitivity. The nitrile finger cots can thus be used for nursing, cosmetics, laboratory, hygiene, cleaning, food industry. The features of the nitrile finger cots at a glance: smooth surface, rolled ends protect one finger at a time or work where the whole hand does not need protection elastic for maximum dexterity very good sense of touch
Colour
Patient gowns | PP
Patient gowns made of PP by Hygostar These patient gowns are made of strong, pure PP. The material is breathable and particularly soft. The high-quality PP fleece makes the patient gowns pleasant and comfortable to wear. The patient gowns also provide protection against minor superficial mechanical hazards. The gowns are open at the back and can be closed with ties at the waist neck. The PP gowns are a hygienic solution for hospitals, nursing homes and other medical facilities. Features of the patient gowns at a glance: air-permeable, strong PP fleece high wearing comfort with ties at the waist and neck very hygienic prevents contamination in the care sector protection against minor superficial mechanical risks
Colour
Disposable aprons | PP
Disposable aprons made of PP from Hygostar Unique and not only available in classic white: Buy black bib aprons made of PP fleece at Franz Mensch. The modern look and high wearing comfort make these disposable aprons something special. Both the black and the white disposable aprons are made of a high-quality, very evenly woven PP fleece. It is very hard-wearing, soft, air-permeable and thus ensures a particularly pleasant feeling when worn - skin-friendly and without sweating. At the same time, PP aprons are moisture and dirt repellent because splashes simply roll off the surface. Disposable aprons made of non-woven material are food-safe and therefore approved for all areas where food is handled. Especially the black PP aprons are a highlight for gastronomy, catering or service areas where you place particular value on a modern and elegant appearance. Advantages of disposable aprons made of PP at a glance: high-quality polypropylene fleece modern look thanks to black colour also available in white - ideal for sensitive hygiene areas air-permeable and extremely comfortable splashes roll off, light protection against liquids and dirt in a bag, approx. 40 g/m² very breathable can be tied at the waist, closed neckband protection against minor superficial mechanical risks ideal for catering and service approved for all food areas
Colour
food-safe
Oversleeves | PP/PE
Oversleeves made of PP, PE coated by Hygostar The oversleeves made of PP have a PE coating on the outside. Your advantage: soft, comfortable inside combined with water-repellent outside against moisture and splashes. The coating also makes the sleeves more hard-wearing and durable. The disposable sleeves are food-safe and can be used for handling all types of food. They specifically cover the forearms, making them ideal for prep or sorting work in the food industry and other hygienic areas. Features of the oversleeves made of PP/PE at a glance: sleeves made of air-permeable, soft PP fleece outside with water-repellent PE coating  hard-wearing no slipping thanks to rubber bands at both ends, latex-free food-safe protection against low superficial mechanical risks
Colour

Face masks type II, 3-ply made of PP, individually packed by Hygostar

The 3-ply face mask type II is individually packed in a bag. It is therefore particularly suitable for handing out to employees or visitors. The masks are handled by the wearer's hands only - very clean and hygienic. The face mask type II has an excellent filtering performance of 98% BFE and is approved for use in the medical field. The face masks are used as foreign body protection in hospital and nursing care. They protect against so-called droplet infections.

Features of the face masks type II, individually packed at a glance:

  • hygienic single packs
  • 98 % BFE, excellent filter performance
  • high-quality PP fleece
  • 3 layers
  • tight fit thanks to elastic ear loops
  • adjustable nose clip for a good hold of the mask
  • for single use

Intended purpose

For third-party protection (protection against droplet infection) in the hospital and care sector

Functional range

suitable for medical use

Properties

Layers:
Type of inner packaging: OPP
Type of outer packaging: cardboard
material: PP

Certifications / Standards

CE
MD - Medical device according to Regulation (EU) 2017/745
EN 14683 type II - Requirements for medical face masks type II
food safe

Overview all norms of Face masks type II, 3-ply | PP, individually packed

       

Download all documents for your product here:

Declaration of conformity for food safety
Declaration of conformity for medical devices
Technical data sheet

For completed orders you can also download all documents collected in the order overwiev !

Matching accessories
Face Mask dispenser | Stainless steel
Dieser Spenderhalter ist aus rostfreiem Edelstahl gefertigt und ist ein Halter für Mundschutz aus Polypropylen. Passend für folgende Artikel: Mundschutz mit Bindebändern, 3-lagig (Art. 29167, 29166) Mundschutz mit Gummibändern, 3-lagig (Art. 29177, 29176, 2917, 29175, 29178) Mundschutz mit Gummiband über Kopf, 3-lagig (Art. 29197)  
Colour