DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
- overboots with slip-resistant Gripper™ sole for secure footing
- covered elasticated bands and ankle ties for a firm fit
- bound, internal seams for added stability
- high barrier against particles, microorganisms and liquid splashes
- breathable, extremely low-lint and antistatic
Similar articles
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.50
1 Paar
DuPont™ Tychem® 2000 C boot cover BOBA
DuPont™ Tychem® 2000 C boot cover BOBAThe Tychem® 2000 C BOBA boot cover from DuPont™ reliably complements personal protective equipment in work environments with high chemical and hygiene demands. The knee-high cover with slip-resistant sole offers splash-proof protection, though it is not fully liquid-tight. Made from robust Tyvek® material with a polymer coating, it provides effective protection against inorganic chemicals and infectious agents – even when in contact with pressurised liquids.Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams offer additional safety. The boot cover is ideally suited for use with Tychem® protective clothing.Properties of DuPont™ Tychem® 2000 C boot cover BOBA at a glance:knee-high cover with slip-resistant sole for secure footingsplash-proof but not fully liquid-tightrobust Tyvek® material with polymer coatingeffective protection against inorganic chemicals and infectious agentssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€3.17
1 Stück
Boot cover Typ PB 6B | microporous
Boot cover Typ PB 6B | microporousWhite overboots made of breathable microporous fleece protect shoes from light liquid splashes and hazardous particles. Elasticated cuffs at the opening and ankle guarantee a quick fit without slipping. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection-resistant according to EN 14126 - ideal for cleanrooms, laboratories and the food industry.Properties of Boot cover Typ PB 6B | microporous at a glance:CAT III / PB 6B – basic protectionmicroporös, stops spray & dustrubber top & at the ankle & lint-free, easy to clean;lint-free, low-linting – ISO class 7 suitableantistatic surface EN 1149-5disposable – hygienic & efficient
not available
From
€38.30
100 Stück
Boot cover with tape Typ PB 4B+6B | microporous
Boot cover with tape Typ PB 4B+6B | microporousThese overboots combine thick microporous fabric with taped seams and non-slip PVC soles. They protect against dense spray and dusty particles (type PB 4B/6B) while remaining breathable. Elasticated cuffs and ankle straps ensure a secure fit. Antistatic according to EN 1149-5 and infection protection according to EN 14126 – ideal for paint booths, nuclear or pharmaceutical areas.Properties of Boot cover with tape Typ PB 4B+6B | microporous at a glance:CAT III / PB 4B + 6B – splash & dustprooftaped nähte, thicker filmprofiled PVC sole – slip-resistantdouble elasticated + ankle strapsantistatic & EN 14126-compliantbreathable membrane – comfortable in continuous use
not available
From
€75.95
100 Stück
DACH SAFE® SafeGuard Boot 974, Cleanroom overboots Type PB 6
DACH SAFE® SafeGuard Boot 974, Cleanroom overboots Type PB 6The DACH SAFE® SafeGuard Boot 974 is an electrostatically dissipative disposable overboot, designed for use in cleanrooms of classes 7–9. Made from particularly robust PP trilaminate, it provides reliable protection against particles, liquids and chemical exposure. The ultrasonic welded seams ensure a continuous barrier against contamination, while the elasticated band at the ankle guarantees a secure fit. As certified Category III Personal Protective Equipment, the overboot meets the requirements of EN 13034, Type PB [6], and has been successfully tested for cleanroom suitability in accordance with IEST-RP-CC003.3 (Helmke Drum, category II).Properties of DACH SAFE® SafeGuard Boot 974, Cleanroom overboots Type PB 6 at a glance:electrostatically dissipative for sensitive cleanroom areasreliable protection against particles, liquids and chemicalsrobust PP trilaminate with ultrasonic welded seamssecure fit thanks to elasticated band at the anklecertified according to EN 13034 Type PB [6] and Helmke Drum category II
not available
From
€131.50
100 Paar
Overboots Strong | microporous
Overboots Strong made of microporous from HygostarThese disposable boots are particularly tight against liquids, but at the same time breathable and comfortable. This is because the overboots are made of special microporous fabric. This material has the properties of a functional membrane, which is tight against moisture and yet allows air to circulate. This means that you have much more comfort while wearing than comparable overboots made of PE.Thanks to the extremely durable, long-lasting vinyl outsole, the disposable boots are suitable for both outdoor and indoor use. They are ideal in wet and humid conditions and in sensitive hygiene areas, protecting against dirt, moisture and contamination. With a height of 50 cm, the disposable overboots cover a large area of your legs and protect the clothing underneath. For added waterproofing and a snug fit, the boots feature elastic at the top and tie straps in the middle.Put on overboots: Here's howsimply step into the overboots with your normal work shoes and pull up over pants or coveralls.an elastic band at the top of the shaft holds the boot in place below the knee and provides additional sealing.then close the sewn tie straps so that nothing can slip.Advantages of the overboots Strong made of microporous at a glance:special Microporous materialwaterproof and breathable at the same timesturdy vinyl solesuitable for outdoors and indoorswith binding band for a secure hold50 cm high for large area coverageOther products made of Microporous material:art.-no. 27551: Microporous disposable jacketsart.-no. 27531: Microporous disposable pantsart.-no. 27821: Overalls type 5B+6B from Microporousart.-no. 28320: Microporous sleeve protectors with thumb holeart.-no. 28660: Microporous overshoesart.-no. 13100: Microporous disposable hood
not available
From
€76.60
100 Stück
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
DuPont™ Tyvek® IsoClean® overboots IC458B00 with slip-resistant Gripper™ sole offer reliable protection and high wearing comfort in one. The overboots feature covered elasticated bands at calves and leg ends as well as ankle ties to ensure a secure fit. Bound, internal seams provide additional stability.
Tyvek® IsoClean® is made from high-density polyethylene, manufactured using the patented flash-spinning process, and offers an effective barrier against particles, microorganisms and harmless splashes of water-based liquids. The material is breathable, extremely low-lint and antistatic. They are compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353).
The overboots are not processed under cleanroom conditions and not sterilised, but are manufactured in a controlled environment. They are suitable for use in cleanrooms of GMP class C/D as well as in industries such as biotechnology, pharmaceuticals, medical technology, food processing, cosmetics and electronics. Certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], they also comply with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.
Properties of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00 at a glance:
- overboots with slip-resistant Gripper™ sole for secure footing
- covered elasticated bands at calves and leg ends as well as ankle ties for a firm fit
- bound, internal seams for added stability made from high-density polyethylene
- effective barrier against particles, microorganisms and splashes of water-based liquids
- breathable, extremely low-lint and antistatic
- not sterilised but manufactured in a controlled environment
- suitable for cleanrooms of GMP class C/D
- compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353)
Functional range
cleanrooms in the biotechnology, pharmaceutical, medical device manufacturing, food processing, cosmetics and electronics industries
Properties
| Type of outer packaging: | cardboard |
|---|---|
| material: | Tyvek |
| Norms: |
       |
Certifications / Standards
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| product information |
| Suitable for use in cleanrooms ISO class 6-9, GMP class C/D. Observe instructions for use. |
Overview all norms of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Buy together with
DuPont™ Tyvek® Isoclean® Shoe Cover IC451S00
DuPont™ Tyvek® Isoclean® Shoe Cover IC451S00The slip-resistant shoe cover offer excellent safety thanks to their slip-resistant sole. The neatened, internal seams ensure comfort and reduce the risk of irritation. Covered elasticated leg ends ensure a secure fit and prevent the shoes from slipping while being worn.Properties of DuPont™ Tyvek® Isoclean® Shoe Cover IC451S00 at a glance:Overshoes with non-slip soleNeatened inside seamsCovered elasticated leg ends
not available
From
€0.93
1 Stück
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5DuPont™ Tyvek® 500 Xpert protective coveralls provide reliable protection and high wearing comfort for demanding work environments. The suit features an ergonomic cut and a three-piece hood that fits perfectly to the head and face, ensuring a secure fit even during movement. External seams, elasticated bands on the hood, sleeve and leg ends, as well as an integrated elastic band in the back area, guarantee an excellent fit. The Tyvek® zip with cover and large slider makes donning and doffing easy.The Tyvek® material consists of fine, spun continuous polyethylene fibres. It is permeable to air and water vapour while repelling water-based liquids and spray mist. Tyvek® offers a high barrier against particles and fibres smaller than 1 µm, is extremely low-lint, antistatic and silicone-free. These protective coveralls are ideal for handling pharmaceuticals, in the chemical process industry, the oil and gas sector, for maintenance work and for painting tasks in the automotive industry.The Tyvek® 500 Xpert protective coveralls are certified according to Regulation (EU) 2016/425 and meet the requirements for chemical protective clothing Category III, Type 5-B and 6-B. Thanks to the optimised design, they offer very low inward leakage and are suitable for cleanrooms of GMP class C/D.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:reliable protection and high wearing comfort for demanding work environmentsergonomic cut with three-piece hood for a secure fitexternal seams and elasticated bands on hood, sleeves, leg ends and back areaTyvek® zip with cover and large slider for easy donning and doffingmaterial made from fine, spun continuous polyethylene fibresair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against particles and fibres smaller than 1 µmextremely low-lint, antistatic and silicone-free
not available
From
€5.90
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.40
1 Stück
DuPont™ Tychem® 2000 C Chemical Safety Coveralls CHA5
DuPont™ Tychem® 2000 C Chemical Safety Coveralls CHA5DuPont™ Tychem® 2000 C chemical protective coveralls CHA5 provide reliable protection against a wide range of concentrated inorganic chemicals and infectious agents. The hooded suit features taped seams, thumb loops, and elasticated bands on the hood, sleeve and leg ends, as well as at the back for a secure fit. The double self-adhesive zip and chin flap ensure maximum tightness. For enhanced protection, the chemical protective coveralls can be ideally combined with the DuPont™ Tychem® 2000 C boot cover model BOBA (Art. No. TD13984672).Tychem® 2000 C combines the strength of Tyvek® with a polymer coating, delivering high barrier performance even against pressurised chemical splashes. The lightweight yet robust suit weighs less than 450 g and comes in yellow for high visibility. It meets the requirements of EU Regulation 2016/425 for chemical protective clothing Category III, Type 3-B, 4-B, 5-B and 6-B, as well as EN 14126 for protection against infectious agents and EN 1073-2 for protection against radioactive contamination.Typical applications include the chemical process industry, food processing, pulp and paper manufacturing, and pharmaceutical production, where a high level of protection combined with comfort is essential.Properties of DuPont™ Tychem® 2000 C Chemical Safety Coveralls CHA5 at a glance:reliable protection against concentrated inorganic chemicals and infectious agentshooded coverall with taped seams and thumb loopselasticated bands on hood, sleeve and leg ends and at the back for a secure fitdouble self-adhesive zip flap and chin guard for maximum tightnesscombination of Tyvek® strength and polymer coating for high barrier performanceresistant to pressurised chemical splasheslightweight and robust with a weight under 450 gyellow colour for high visibilitycompatible with the DuPont™ Tychem® 2000 C boot cover model BOBA (Art. No. TD13984672)
not available
From
€19.45
1 Stück
More from this brand
DuPont™ Tychem® 2000 C Chemical Safety Coveralls CHA5
DuPont™ Tychem® 2000 C Chemical Safety Coveralls CHA5DuPont™ Tychem® 2000 C chemical protective coveralls CHA5 provide reliable protection against a wide range of concentrated inorganic chemicals and infectious agents. The hooded suit features taped seams, thumb loops, and elasticated bands on the hood, sleeve and leg ends, as well as at the back for a secure fit. The double self-adhesive zip and chin flap ensure maximum tightness. For enhanced protection, the chemical protective coveralls can be ideally combined with the DuPont™ Tychem® 2000 C boot cover model BOBA (Art. No. TD13984672).Tychem® 2000 C combines the strength of Tyvek® with a polymer coating, delivering high barrier performance even against pressurised chemical splashes. The lightweight yet robust suit weighs less than 450 g and comes in yellow for high visibility. It meets the requirements of EU Regulation 2016/425 for chemical protective clothing Category III, Type 3-B, 4-B, 5-B and 6-B, as well as EN 14126 for protection against infectious agents and EN 1073-2 for protection against radioactive contamination.Typical applications include the chemical process industry, food processing, pulp and paper manufacturing, and pharmaceutical production, where a high level of protection combined with comfort is essential.Properties of DuPont™ Tychem® 2000 C Chemical Safety Coveralls CHA5 at a glance:reliable protection against concentrated inorganic chemicals and infectious agentshooded coverall with taped seams and thumb loopselasticated bands on hood, sleeve and leg ends and at the back for a secure fitdouble self-adhesive zip flap and chin guard for maximum tightnesscombination of Tyvek® strength and polymer coating for high barrier performanceresistant to pressurised chemical splasheslightweight and robust with a weight under 450 gyellow colour for high visibilitycompatible with the DuPont™ Tychem® 2000 C boot cover model BOBA (Art. No. TD13984672)
not available
From
€19.45
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.40
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.05
1 Stück
DuPont™ Tychem® 2000 C lab coat 0290
DuPont™ Tychem® 2000 C lab coat 0290The Tychem® 2000 C lab coat from DuPont™ offers reliable protection when working with hazardous substances. The shin-length back fastening gown with a hook-and-loop closure at the neck and double cuffs ensures a secure fit, high wearing comfort and optimal connection with gloves. The combination of Tyvek® material and polymer coating provides effective protection against inorganic chemicals and biological hazards, even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, the gown meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams enhance durability.Properties of DuPont™ Tychem® 2000 C lab coat 0290 at a glance:shin-length back fastening gown with hook-and-loop closure at the neckdouble cuffs for a secure fit and optimal connection with glovesdurable combination of Tyvek® material and polymer coatingprotects against inorganic chemicals, biological hazards and contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1taped seams for enhanced durabilityideally combinable with Tychem® protective clothing
not available
From
€12.60
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.60
1 Stück
DuPont™ Tychem® 2000 C apron PA30L0
DuPont™ Tychem® 2000 C Schürze PA30L0The Tychem® 2000 C apron from DuPont™ offers reliable protection when working with hazardous substances. The calf-length apron with adjustable straps at the neck and waist provides a secure fit and can be flexibly integrated into existing protection concepts. Made from durable Tyvek® material with a polymer coating, it offers effective protection against a wide range of inorganic chemicals and biological hazards – even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 provide additional safety. The apron is the ideal complement to the DuPont™ Tychem® 2000 C range.Eigenschaften der DuPont™ Tychem® 2000 C Schürze PA30L0 im Überblick:calf-length apron with adjustable straps at neck and waistsecure fit and flexible integration into existing protection conceptsdurable Tyvek® material with polymer coatingeffective protection against inorganic chemicals and biological hazardssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€4.30
1 Stück