DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
sterile cleanroom overboots
- sterile overboots for cleanrooms, gamma-sterilised
- internal seams are edged for extra protection
- fitted with covered elasticated leg opening and ankle lacing
- Gripper™ soles provide improved slip resistance and durability
- low-linting and breathable material properties
- aseptically folded for easy donning
Similar articles
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.05
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.47
1 Paar
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.45
1 Stück
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00DuPont™ Tyvek® IsoClean® overboots IC458B00 with slip-resistant Gripper™ sole offer reliable protection and high wearing comfort in one. The overboots feature covered elasticated bands at calves and leg ends as well as ankle ties to ensure a secure fit. Bound, internal seams provide additional stability.Tyvek® IsoClean® is made from high-density polyethylene, manufactured using the patented flash-spinning process, and offers an effective barrier against particles, microorganisms and harmless splashes of water-based liquids. The material is breathable, extremely low-lint and antistatic. They are compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353).The overboots are not processed under cleanroom conditions and not sterilised, but are manufactured in a controlled environment. They are suitable for use in cleanrooms of GMP class C/D as well as in industries such as biotechnology, pharmaceuticals, medical technology, food processing, cosmetics and electronics. Certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], they also comply with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Properties of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00 at a glance:overboots with slip-resistant Gripper™ sole for secure footingcovered elasticated bands at calves and leg ends as well as ankle ties for a firm fitbound, internal seams for added stability made from high-density polyethyleneeffective barrier against particles, microorganisms and splashes of water-based liquidsbreathable, extremely low-lint and antistaticnot sterilised but manufactured in a controlled environmentsuitable for cleanrooms of GMP class C/Dcompatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353)
not available
From
€1.37
1 Stück
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5DuPont™ Tyvek® 500 Xpert protective coveralls provide reliable protection and high wearing comfort for demanding work environments. The suit features an ergonomic cut and a three-piece hood that fits perfectly to the head and face, ensuring a secure fit even during movement. External seams, elasticated bands on the hood, sleeve and leg ends, as well as an integrated elastic band in the back area, guarantee an excellent fit. The Tyvek® zip with cover and large slider makes donning and doffing easy.The Tyvek® material consists of fine, spun continuous polyethylene fibres. It is permeable to air and water vapour while repelling water-based liquids and spray mist. Tyvek® offers a high barrier against particles and fibres smaller than 1 µm, is extremely low-lint, antistatic and silicone-free. These protective coveralls are ideal for handling pharmaceuticals, in the chemical process industry, the oil and gas sector, for maintenance work and for painting tasks in the automotive industry.The Tyvek® 500 Xpert protective coveralls are certified according to Regulation (EU) 2016/425 and meet the requirements for chemical protective clothing Category III, Type 5-B and 6-B. Thanks to the optimised design, they offer very low inward leakage and are suitable for cleanrooms of GMP class C/D.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:reliable protection and high wearing comfort for demanding work environmentsergonomic cut with three-piece hood for a secure fitexternal seams and elasticated bands on hood, sleeves, leg ends and back areaTyvek® zip with cover and large slider for easy donning and doffingmaterial made from fine, spun continuous polyethylene fibresair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against particles and fibres smaller than 1 µmextremely low-lint, antistatic and silicone-free
not available
From
€5.90
1 Stück
DuPont™ Tychem® 2000 C boot cover BOBA
DuPont™ Tychem® 2000 C boot cover BOBAThe Tychem® 2000 C BOBA boot cover from DuPont™ reliably complements personal protective equipment in work environments with high chemical and hygiene demands. The knee-high cover with slip-resistant sole offers splash-proof protection, though it is not fully liquid-tight. Made from robust Tyvek® material with a polymer coating, it provides effective protection against inorganic chemicals and infectious agents – even when in contact with pressurised liquids.Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams offer additional safety. The boot cover is ideally suited for use with Tychem® protective clothing.Properties of DuPont™ Tychem® 2000 C boot cover BOBA at a glance:knee-high cover with slip-resistant sole for secure footingsplash-proof but not fully liquid-tightrobust Tyvek® material with polymer coatingeffective protection against inorganic chemicals and infectious agentssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€3.17
1 Stück
Matching accessories
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.47
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.60
1 Stück
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.45
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.05
1 Stück
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
Tyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.
Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:
- sterile overboots for cleanrooms, gamma-sterilised
- internal seams are edged for extra protection
- fitted with covered elasticated leg opening and ankle lacing
- Gripper™ soles provide improved slip resistance and durability
- low-linting and breathable material properties
- aseptically folded for easy donning
- manufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)
- ideal for use in GMP class A/B cleanrooms (ISO class 5)
Functional range
Clean rooms: GMP class A/B (ISO class 5)
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tyvek |
| Norms: |
        |
Certifications / Standards
| ISO 11137 - Sterilization of health care products |
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| product information |
| Suitable for use in cleanrooms ISO class 5, GMP class A/B. Observe instructions for use. |
Overview all norms of DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Buy together with
Ansell TouchNTuff® 73-500, cleanroom gloves
Ansell TouchNTuff® 73-500, cleanroom glovesThe Ansell TouchNTuff® 73-500 is a sterile disposable neoprene glove, ideal for use in ISO Class 5 cleanrooms. With a sterility assurance level (SAL) of 10-⁶, it ensures the highest hygiene requirements and effectively protects against chemical splashes in various hazards. The latex-free glove is particularly versatile, as it can be worn both as an outer glove and as an underglove, offering a high level of comfort and reliable safety.Features of the Ansell TouchNTuff® 73-500, cleanroom gloves at a glance:sterile disposable glove made of neoprene (polychloroprene) for the cleanroomISO class 5 cleanroom suitabilitySterility assurance level (SAL) of 10-6can be worn both as an outer glove and as an undergloveexcellent protection against chemical splashes from a wide range of hazardslatex-free
not available
From
€223.00
100 Paar
Face masks type II, 3-ply | PP, individually packed
Face masks type II, 3-ply made of PP, individually packed by Hygostar
The 3-ply face mask type II is individually packed in a bag. It is therefore particularly suitable for handing out to employees or visitors. The masks are handled by the wearer's hands only - very clean and hygienic. The face mask type II has an excellent filtering performance of 98% BFE and is approved for use in the medical field. The face masks are used as foreign body protection in hospital and nursing care. They protect against so-called droplet infections.
Features of the face masks type II, individually packed at a glance:
hygienic single packs
98 % BFE, excellent filter performance
high-quality PP fleece
3 layers
tight fit thanks to elastic ear loops
adjustable nose clip for a good hold of the mask
for single use
not available
From
€5.35
100 Stück
Multipurpose glasses for spectacle wearer
Multipurpose glasses for spectacle wearerThese safety goggles are ideal for wearing over regular glasses. The clear lenses are made of polycarbonate and therefore highly scratch-resistant. These goggles are also suitable for use as laboratory safety glasses.
not available
From
€1.08
1 Stück
ELTEN® PURE Easy 72322, safety sandals S1 ESD
ELTEN® PURE Easy 72322, safety sandals S1 ESDCertified according to EN ISO 20345:2022 S1 ESD, the PURE Easy 72322 provides optimal protection and high comfort for environments such as hospitals, large kitchens, and laboratories. The white design is ideal for hygienic areas. The microfiber upper combined with breathable textile lining ensures a comfortable shoe climate and high breathability. Integrated steel toe caps reliably protect against pressure and impact. The sandal is lightweight, enabling fatigue-free work during long shifts. Orthopedic insoles can be easily used, and the SR slip-resistant sole requirement is met.Properties of the ELTEN® PURE Easy 72322, safety sandals S1 ESD at a glance:microfiber upper with breathable textile liningintegrated steel toe caps for reliable protectionlightweight design for long-lasting comfortSR-tested slip-resistant sole, compatible with orthopedic insolescertified according to EN ISO 20345:2022 S1 ESD
not available
From
€66.35
1 Paar
Respirators FFP3 NR with valve, vertically foldable | PP
Respirators FFP3 NR with valve, vertically foldable made of PP by HygostarThe FFP3 respirators with valve meet the highest category of respiratory protection filter classes. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. They are particularly suitable for sensitive areas where hygiene and protection against infection are top priorities. These include medicine, laboratory, nursing, hospital as protective equipment, industry and food industry. the respirators FFP3 NR have an integrated valve. So you breathe noticeably easier and more comfortable. The masks are fixed with head band - without pressing behind the ear. So the FFP3 masks feel comfortable even when worn for long periods.Features of the respirators FFP3 NR with valve, vertically foldable at a glance:high wearing comforthigh-quality material made of PP fleecevertically folded, large breathing surfacevalve facilitates inhalation and exhalationwith head band - no pressure behind the earwith clip for easier putting on and taking off of the maskflexible nose clip for tight fiteach mask individually packed in a hygienic bag, 10 x 10 bags in a box
not available
From
€52.55
100 Stück
More from this brand
DuPont™ Tyvek® 400 Dual Coveralls CHF 5
DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5The protective suit made of Tyvek® offers reliable protection with its hood and external seams. The front is made of robust Tyvek®, while a large breathable SMS insert in the back area ensures comfort. Elasticated cuffs, leg ends and hood provide a secure fit, supported by a sewn-in elastic in the back. Permeable to air and water vapor as well as repellent to water-based liquids and spray mist, it offers optimal protection in various work environments. The suit is particularly suitable for applications that involve exposure of the front of the body.Properties of DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5 at a glance:Hooded suitExternal seamsFront made of Tyvek®, large breathable insert made of SMS in the back areaElasticated cuffs, leg ends and hoodElastic band in the back area (sewn in)permeable to air and water vaporrepellent to water-based liquids and spray mist
not available
From
€5.90
1 Stück
DuPont™ Tychem® 2000 C apron PA30L0
DuPont™ Tychem® 2000 C Schürze PA30L0The Tychem® 2000 C apron from DuPont™ offers reliable protection when working with hazardous substances. The calf-length apron with adjustable straps at the neck and waist provides a secure fit and can be flexibly integrated into existing protection concepts. Made from durable Tyvek® material with a polymer coating, it offers effective protection against a wide range of inorganic chemicals and biological hazards – even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 provide additional safety. The apron is the ideal complement to the DuPont™ Tychem® 2000 C range.Eigenschaften der DuPont™ Tychem® 2000 C Schürze PA30L0 im Überblick:calf-length apron with adjustable straps at neck and waistsecure fit and flexible integration into existing protection conceptsdurable Tyvek® material with polymer coatingeffective protection against inorganic chemicals and biological hazardssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€4.30
1 Stück
DuPont™ Tychem® 2000 C lab coat 0290
DuPont™ Tychem® 2000 C lab coat 0290The Tychem® 2000 C lab coat from DuPont™ offers reliable protection when working with hazardous substances. The shin-length back fastening gown with a hook-and-loop closure at the neck and double cuffs ensures a secure fit, high wearing comfort and optimal connection with gloves. The combination of Tyvek® material and polymer coating provides effective protection against inorganic chemicals and biological hazards, even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, the gown meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams enhance durability.Properties of DuPont™ Tychem® 2000 C lab coat 0290 at a glance:shin-length back fastening gown with hook-and-loop closure at the neckdouble cuffs for a secure fit and optimal connection with glovesdurable combination of Tyvek® material and polymer coatingprotects against inorganic chemicals, biological hazards and contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1taped seams for enhanced durabilityideally combinable with Tychem® protective clothing
not available
From
€12.60
1 Stück
DuPont™ Tyvek® 500 Hood PH30L0
DuPont™ Tyvek® 500 Hood PH30L0The hood features a wide collar and elastic bands on the face and neck for improved protection. It was developed to protect particularly exposed areas and is at the same time permeable to air and water vapor as well as repellent to water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Hood PH30L0 at a glance:Hood with wide collar and elastic bands at the face opening and neckis intended to provide even better protection for particularly exposed parts of the bodypermeable to air and water vapor repellent to water-based liquids and spray mist
not available
From
€1.03
1 Stück
DuPont™ Tychem® 6000 F Chemical Safety Coveralls CHA5
DuPont™ Tychem® 6000 F Chemical Safety Coveralls CHA5DuPont™ Tychem® 6000 F chemical protective coveralls CHA5 provide extremely high protection against toxic industrial organic chemicals, highly concentrated inorganic chemicals and infectious agents. The grey hooded suit features taped seams, thumb loops and elasticated bands on the hood, sleeve and leg ends as well as at the back for a secure fit. The double self-adhesive zip and chin flap ensure maximum tightness.Tychem® 6000 F is made from a lightweight, durable barrier film laminated onto a robust Tyvek® substrate, offering exceptional resistance to the permeation of more than 250 chemicals, even under pressure. The suit also protects against particles, infectious agents and certain chemical warfare agents. Weighing less than 500 g, it is lightweight yet extremely durable.Certified according to EU Regulation 2016/425 for chemical protective clothing Category III, Type 3-B, 4-B, 5-B and 6-B, as well as EN 14126 and EN 1073-2, it meets the highest safety standards. Typical applications include emergency response, chemical spill clean-up, military operations and petrochemical environments, where uncompromising protection and comfort are essential.Properties of DuPont™ Tychem® 6000 F Chemical Safety Coveralls CHA5 at a glance:extremely high protection against toxic organic and highly concentrated inorganic chemicals as well as infectious agentswith taped seams, thumb loops and elasticated bands on hood, sleeve and leg ends and at the backdouble self-adhesive zip flap and chin guard for maximum tightnesshooded coverall laminated with a durable barrier film on a robust Tyvek® substrateexceptional barrier against permeation of over 250 chemicals, even under pressureprotection against particles, infectious agents and certain chemical warfare agents
not available
From
€25.75
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.05
1 Stück