DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
Chemical protection suit, cleanroom suit
- sterile cleanroom suit without hood, gamma-sterilized
- seams on the inside of the garment
- covered elastic at arm and leg ends and in the back area
- front zipper with zipper cover
- DuPont™ Tyvek® edged elastic thumb loops
- breathable and low-linting
Similar articles
Skip product gallery
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.60
1 Paar
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.75
1 Paar
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.80
1 Stück
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5DuPont™ Tyvek® 500 Xpert protective coveralls provide reliable protection and high wearing comfort for demanding work environments. The suit features an ergonomic cut and a three-piece hood that fits perfectly to the head and face, ensuring a secure fit even during movement. External seams, elasticated bands on the hood, sleeve and leg ends, as well as an integrated elastic band in the back area, guarantee an excellent fit. The Tyvek® zip with cover and large slider makes donning and doffing easy.The Tyvek® material consists of fine, spun continuous polyethylene fibres. It is permeable to air and water vapour while repelling water-based liquids and spray mist. Tyvek® offers a high barrier against particles and fibres smaller than 1 µm, is extremely low-lint, antistatic and silicone-free. These protective coveralls are ideal for handling pharmaceuticals, in the chemical process industry, the oil and gas sector, for maintenance work and for painting tasks in the automotive industry.The Tyvek® 500 Xpert protective coveralls are certified according to Regulation (EU) 2016/425 and meet the requirements for chemical protective clothing Category III, Type 5-B and 6-B. Thanks to the optimised design, they offer very low inward leakage and are suitable for cleanrooms of GMP class C/D.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:reliable protection and high wearing comfort for demanding work environmentsergonomic cut with three-piece hood for a secure fitexternal seams and elasticated bands on hood, sleeves, leg ends and back areaTyvek® zip with cover and large slider for easy donning and doffingmaterial made from fine, spun continuous polyethylene fibresair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against particles and fibres smaller than 1 µmextremely low-lint, antistatic and silicone-free
not available
From
€5.90
1 Stück
DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5
DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5DuPont™ Tyvek® 200 Easysafe protective coveralls CHF 5 provide reliable protection while ensuring high wearing comfort. The hooded suit is made from an optimised polyethylene fabric that is soft and breathable, yet offers a higher level of protection than SMS coveralls. With yellow external seams for visual differentiation, elasticated bands on the hood, sleeve and leg ends, as well as a sewn-in elastic band at the back, it ensures a secure fit. The zip with cover further enhances the protective effect. Tyvek® 200 is air and water vapour permeable and provides certified protection according to EU Regulation 2016/425 for chemical protective clothing Category III, Type 5 and 6. The suit is antistatic in accordance with EN 1149-1/5 and meets the requirements for protective clothing against radioactive contamination according to EN 1073-2. Typical areas of application include remediation, industrial cleaning and general production, where a reliable and comfortable protective suit is required.Properties of DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5 at a glance:reliable protection with high wearing comforthooded coverall made from optimised polyethylene fabric, soft and breathablehigher level of protection than SMS coverallsyellow external seams for visual differentiationelasticated bands on hood, sleeve and leg ends as well as sewn-in elastic at the backzip with cover for additional protectionair and water vapour permeable
not available
From
€3.72
1 Stück
DuPont™ Tyvek® 400 Dual Coveralls CHF 5
DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5The protective suit made of Tyvek® offers reliable protection with its hood and external seams. The front is made of robust Tyvek®, while a large breathable SMS insert in the back area ensures comfort. Elasticated cuffs, leg ends and hood provide a secure fit, supported by a sewn-in elastic in the back. Permeable to air and water vapor as well as repellent to water-based liquids and spray mist, it offers optimal protection in various work environments. The suit is particularly suitable for applications that involve exposure of the front of the body.Properties of DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5 at a glance:Hooded suitExternal seamsFront made of Tyvek®, large breathable insert made of SMS in the back areaElasticated cuffs, leg ends and hoodElastic band in the back area (sewn in)permeable to air and water vaporrepellent to water-based liquids and spray mist
not available
From
€5.90
1 Stück
Matching accessories
Skip product gallery
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.60
1 Paar
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.75
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.83
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.
* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.
Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:
- sterile cleanroom suit without hood, gamma-sterilized
- seams on the inside of the garment
- covered elastic at arm and leg ends and in the back area
- front zipper with zipper cover
- DuPont™ Tyvek® edged elastic thumb loops
- breathable and low-linting
- aseptically folded
- processed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))
- suitable for use in GMP class A/B (ISO class 5)* cleanrooms
Functional range
Clean rooms: GMP class A/B (ISO class 5)
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tyvek |
| Norms: |
         |
Certifications / Standards
| ISO 11137 - Sterilization of health care products |
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| EN 1073-2 Class 2 - Protective clothing against radioactive contamination, class 2 |
| product information |
| Suitable for use in cleanrooms ISO class 5, GMP class A/B. Observe instructions for use. |
Overview all norms of DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Supplier-informations
| address: | DuPont De Nemours (Luxembourg) S.à.r.l.; 2, Rue General Patton, 5326 Luxembourg |
| e-mail: | www.dupont.com |
| EAN(s): |
Carton 5450208100111 |
| manufacturer art.-no.: | D15560741 |
Buy together with
Skip product gallery
Ansell TouchNTuff® 83-500, cleanroom gloves
Ansell TouchNTuff® 83-500, cleanroom glovesThe Ansell TouchNTuff® 83-500 is a sterile disposable glove made of polyisoprene, specially developed for ISO class 5 cleanrooms. With a sterility assurance level (SAL) of 10-⁶, it offers maximum hygiene and protection. Thanks to its skin-like comfort, it minimizes hand fatigue even when worn for long periods. The latex-free glove is versatile, as it can be used both as an outer glove and as an underglove.Features of the Ansell TouchNTuff® 83-500, cleanroom gloves at a glance:sterile disposable polyisoprene cleanroom glovesISO class 5 cleanroom suitabilitysterility assurance level (SAL) of 10-6comfort like a second skin and minimizes hand fatigue during prolonged wearcan be worn both as an outer glove and as an underglovelatex-free
not available
From
€372.00
100 Paar
Face masks type II, 3-ply | PP
Face masks type II, 3-ply made of PP from HygostarThis medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
not available
From
€1.69
100 Stück
Tector® Desperado 41940, safety glasses
Tector® Desperado 41940, safety glassesThe Tector® Desperado 41940 safety glasses provide reliable eye protection for demanding work environments such as laboratories, crafts, industry, and chemical sectors. They meet the requirements of EN 166 and are equipped with a clear polycarbonate lens, which, thanks to the 2C-1.2 TEC 1 FT CE technology, ensures optimal vision. The frame is also made of polycarbonate and is certified according to TECTOR EN 166 FT CE. With UV-400 protection, the glasses reliably shield against harmful sunlight, while the scratch-resistant coating ensures long-lasting durability. They offer secure protection against high-speed particles even at extreme temperatures ranging from -5 to +55 °C. The frameless design makes the glasses particularly lightweight and comfortable, with a weight of only about 31 g.Properties of Tector® Desperado 41940, safety glasses at a glance:filter type/lens tint: 2C-1.2/clearlens material: polycarbonateweight: approx. 31 gUV 400 protection against harmful sun exposureanti-fog and scratch-resistantframeless designprotection against flying particles even at temperatures from -5 to +55 °C
not available
From
€0.95
1 Stück
ELTEN® PURE Easy 72322, safety sandals S1 ESD
ELTEN® PURE Easy 72322, safety sandals S1 ESDCertified according to EN ISO 20345:2022 S1 ESD, the PURE Easy 72322 provides optimal protection and high comfort for environments such as hospitals, large kitchens, and laboratories. The white design is ideal for hygienic areas. The microfiber upper combined with breathable textile lining ensures a comfortable shoe climate and high breathability. Integrated steel toe caps reliably protect against pressure and impact. The sandal is lightweight, enabling fatigue-free work during long shifts. Orthopedic insoles can be easily used, and the SR slip-resistant sole requirement is met.Properties of the ELTEN® PURE Easy 72322, safety sandals S1 ESD at a glance:microfiber upper with breathable textile liningintegrated steel toe caps for reliable protectionlightweight design for long-lasting comfortSR-tested slip-resistant sole, compatible with orthopedic insolescertified according to EN ISO 20345:2022 S1 ESD
not available
From
€69.65
1 Paar
Respirators FFP2 NR, horizontally foldable | PP
Respirators FFP2 NR, horizontally foldable made of PP by Hygostar
These respirators of category FFP2 NR are of very high quality. They protect against solid and liquid harmful dusts, smoke and aerosols. In addition, FFP2 masks reduce the absorption and transmission of infectious agents. With FFP2 NR respirators, you also meet strict requirements in sensitive hygiene areas. The masks are suitable for use in medicine, laboratories, nursing, hospitals as protective equipment, industry and food production. Thanks to the head straps, the protective masks fit very tightly and comfortably - no pressing behind the ears. The integrated nose clip is mouldable - for a very good seal and high wearing comfort.
Features of the respirators FFP2 NR, horizontally foldable at a glance:
high-quality PP fleece, folded horizontally
with headband for a firm fit
with mouldable noseband
free of latex, FFP 2 NR
reduces the absorption and transmission of infectious agents
very comfortable even when worn for long periods
protection against solid and liquid harmful dusts, smoke and aerosols
not available
From
€32.40
100 Stück