DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
Chemical protection suit, cleanroom suit
- sterile cleanroom suit without hood, gamma-sterilized
- seams on the inside of the garment
- covered elastic at arm and leg ends and in the back area
- front zipper with zipper cover
- DuPont™ Tyvek® edged elastic thumb loops
- breathable and low-linting
Similar articles
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.50
1 Paar
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.45
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.47
1 Paar
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5The protective suit made of Tyvek® offers comprehensive protection with its hood and elasticated cuffs and leg ends. The external seams and the zipper with cover ensure additional security. Thanks to the glued-in elastic band in the back, the suit fits comfortably and securely, while it is permeable to air and water vapor and protects against water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:Suit with hood and elasticated cuffs and leg endsexternal seamsZipper with coverglued elastic band in the back areapermeable to air and water vaporrepellent to water-based liquids and spray mistvery low inward leakage on both sides due to optimized design
not available
From
€5.90
1 Stück
DuPont™ Tyvek® 400 Dual Coveralls CHF 5
DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5The protective suit made of Tyvek® offers reliable protection with its hood and external seams. The front is made of robust Tyvek®, while a large breathable SMS insert in the back area ensures comfort. Elasticated cuffs, leg ends and hood provide a secure fit, supported by a sewn-in elastic in the back. Permeable to air and water vapor as well as repellent to water-based liquids and spray mist, it offers optimal protection in various work environments. The suit is particularly suitable for applications that involve exposure of the front of the body.Properties of DuPont™ Tyvek® 400 Dual Schutzanzüge CHF 5 at a glance:Hooded suitExternal seamsFront made of Tyvek®, large breathable insert made of SMS in the back areaElasticated cuffs, leg ends and hoodElastic band in the back area (sewn in)permeable to air and water vaporrepellent to water-based liquids and spray mist
not available
From
€5.90
1 Stück
DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5
DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5The Dupont™ Tyvek® Easysafe coveralls offer excellent protection with a hood and outer seams in eye-catching yellow. The elasticated cuffs, legs and hood ensure a secure fit. A sewn-in elasticated band at the back provides additional comfort and freedom of movement. The zipper with cover provides a reliable closure that optimizes protection.Tyvek® 200 is a new and unique, optimized polyethylene nonwoven. It is softer and has a more open structure than Tyvek® 500 or Tyvek® 600.Properties of DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5 at a glance:Suit with hoodExternal, yellow-colored seamsElasticated sleeve and leg ends and hoodElasticated back (sewn in)Zipper with cover
not available
From
€3.54
1 Stück
Matching accessories
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.47
1 Paar
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.50
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.60
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.
* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.
Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:
- sterile cleanroom suit without hood, gamma-sterilized
- seams on the inside of the garment
- covered elastic at arm and leg ends and in the back area
- front zipper with zipper cover
- DuPont™ Tyvek® edged elastic thumb loops
- breathable and low-linting
- aseptically folded
- processed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))
- suitable for use in GMP class A/B (ISO class 5)* cleanrooms
Functional range
Clean rooms: GMP class A/B (ISO class 5)
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tyvek |
| Norms: |
         |
Certifications / Standards
| ISO 11137 - Sterilization of health care products |
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| EN 1073-2 Class 2 - Protective clothing against radioactive contamination, class 2 |
| product information |
| Suitable for use in cleanrooms ISO class 5, GMP class A/B. Observe instructions for use. |
Overview all norms of DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Buy together with
Ansell TouchNTuff® 83-500, cleanroom gloves
Ansell TouchNTuff® 83-500, cleanroom glovesThe Ansell TouchNTuff® 83-500 is a sterile disposable glove made of polyisoprene, specially developed for ISO class 5 cleanrooms. With a sterility assurance level (SAL) of 10-⁶, it offers maximum hygiene and protection. Thanks to its skin-like comfort, it minimizes hand fatigue even when worn for long periods. The latex-free glove is versatile, as it can be used both as an outer glove and as an underglove.Features of the Ansell TouchNTuff® 83-500, cleanroom gloves at a glance:sterile disposable polyisoprene cleanroom glovesISO class 5 cleanroom suitabilitysterility assurance level (SAL) of 10-6comfort like a second skin and minimizes hand fatigue during prolonged wearcan be worn both as an outer glove and as an underglovelatex-free
not available
From
€298.50
100 Paar
price reduced
Face masks type II, 3-ply | PP
Face masks type II, 3-ply made of PP from HygostarThis medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
not available
From
€1.54
100 Stück
Safety goggles, ventilated | PVC
Safety goggles ventilated, PVC
This is made of transparent, pleasantly soft PVC with polycarbonate lenses. Thanks to the integrated air valves, they are ventilated and thus offer a high level of wearing comfort. In addition, the safety goggles are very suitable as over-glasses for spectacle wearers. They are particularly comfortable and fit snugly, and thanks to the elastic band, the safety goggles sit close to the face. The safety goggles reliably protect your eyes from dust, non-corrosive liquids and splashes.
Important properties of the safety goggles ventilated at a glance:
ventilated, integrated air valves
very comfortable to wear
elastic headband, individually adjustable
against minor mechanical shocks (F)
suitable for wearers of glasses
not available
From
€0.93
1 Stück
New
ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESD
ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESDCertified according to EN ISO 20345:2022 S1PS ESD, the BRICE Air XXTM white Low provides metal-free, anti-magnetic protection for use in electronically sensitive environments. The ESD function ensures permanent grounding of the feet and continuously balances voltage differences. The upper made of soft, water-repellent microfiber dries quickly, while the breathable textile lining efficiently absorbs and releases sweat. Ventilation openings on the sides improve airflow. Plastic toe cap, textile penetration protection, and colored labels for marking and area access make the shoe fully safe and functional. The PU outsole with BASF Infinergy® offers slip resistance and excellent cushioning for long periods of standing and walking.Properties of ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESD at a glance:metal-free and anti-magnetic for sensitive work areassoft microfiber upper quick-drying and breathableplastic toe cap, textile penetration protection, and marking functionPU outsole with Infinergy® for slip-resistant cushioningcoloured tear-off label for marking according to area of applicationcertified according to EN ISO 20345:2022 S1PS ESD
not available
From
€75.80
1 Paar
Respirators FFP3 NR with valve, vertically foldable | PP
Respirators FFP3 NR with valve, vertically foldable made of PP by HygostarThe FFP3 respirators with valve meet the highest category of respiratory protection filter classes. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. They are particularly suitable for sensitive areas where hygiene and protection against infection are top priorities. These include medicine, laboratory, nursing, hospital as protective equipment, industry and food industry. the respirators FFP3 NR have an integrated valve. So you breathe noticeably easier and more comfortable. The masks are fixed with head band - without pressing behind the ear. So the FFP3 masks feel comfortable even when worn for long periods.Features of the respirators FFP3 NR with valve, vertically foldable at a glance:high wearing comforthigh-quality material made of PP fleecevertically folded, large breathing surfacevalve facilitates inhalation and exhalationwith head band - no pressure behind the earwith clip for easier putting on and taking off of the maskflexible nose clip for tight fiteach mask individually packed in a hygienic bag, 10 x 10 bags in a box
not available
From
€52.55
100 Stück
More from this brand
DuPont™ Tychem® 6000 F Chemical Safety Coveralls CHA5
DuPont™ Tychem® 6000 F Chemical Safety Coveralls CHA5Tychem® 6000 F protective suits are made from a lightweight, durable material (<500g per suit) and a proprietary barrier film laminated to a robust Tyvek® substrate. They offer an exceptionally high barrier against the permeation of a wide range of chemicals and protect the wearer from numerous organic and highly concentrated inorganic chemicals (including under pressure), particles, infectious agents and certain chemical warfare agents.Properties of DuPont™ Tychem® 6000 F Chemical Safety Coveralls CHA5 at a glance:hooded suittaped seamsthumb loopselasticated cuffs, leg ends, hood and back areaself-adhesive double zipper cover and chin cover
not available
From
€25.75
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.40
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.47
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.60
1 Stück
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.45
1 Stück
DuPont™ Tyvek® 800 J Protective Coveralls TJ198Ta
DuPont™ Tyvek® 800 J Protective Coveralls TJ198TaThe protective coveralls offer reliable protection against chemicals with a hood and taped seams. The thumb loops ensure a secure fit and additional protection for the hands. Elasticated cuffs, leg ends and hood ensure a secure fit, supported by a bonded elasticated back. Self-adhesive zipper and chin covers provide additional safety and protection against the ingress of chemicals.In addition to protection, wearing comfort and mechanical resistance, the coverall offers an efficient barrier against numerous water-based inorganic chemicals in low concentrations (even under pressure) and fine particles. The material is also oil-repellent and antistatic. Typical areas of application for Tyvek® 800 J suits are work in damp to wet environments that require protection against chemicals, liquids and/or oils.Properties of DuPont™ Tyvek® 800 J Protective Coveralls TJ198Ta at a glance:Suit with hoodTaped seamsThumb loopsElasticated sleeve and leg ends and hoodGlued-in elastic in the back areaSelf-adhesive zipper and chin cover
not available
From
€9.00
1 Stück