DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
sterile cleanroom sleeves
- sterile arm cuffs, gamma-sterilised for cleanrooms
- edged inner seams for additional protection
- covered elasticated cuffs and biceps
- breathable and low-linting for high wearing comfort
- suitable for ISO class 5-9 and GMP class A/B cleanrooms
- sterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
Similar articles
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.65
1 Stück
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.75
1 Paar
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.80
1 Stück
DuPont™ Tyvek® 500 Sleeve PS32LA
DuPont™ Tyvek® 500 Sleeve PS32LAThe arm warmers are adjustable for the perfect fit: thanks to the adjustable fit on the upper arm, they offer an individual adjustment option. The blue stitching on the upper arm not only serves aesthetic purposes, but also makes identification easier. Designed with internal seams, they are particularly comfortable to wear and offer improved protection for exposed areas of the body. They are also permeable to air and water vapor and reliably keep out water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Sleeve PS32LA at a glance:adjustable on the upper arm Upper armseam in blue for better identificationinternal seamsis intended to help protect particularly exposed parts of the body even betterpermeable to air and water vaporrepellent to water-based liquids and spray mist
not available
From
€0.65
1 Stück
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5DuPont™ Tyvek® 500 Xpert protective coveralls provide reliable protection and high wearing comfort for demanding work environments. The suit features an ergonomic cut and a three-piece hood that fits perfectly to the head and face, ensuring a secure fit even during movement. External seams, elasticated bands on the hood, sleeve and leg ends, as well as an integrated elastic band in the back area, guarantee an excellent fit. The Tyvek® zip with cover and large slider makes donning and doffing easy.The Tyvek® material consists of fine, spun continuous polyethylene fibres. It is permeable to air and water vapour while repelling water-based liquids and spray mist. Tyvek® offers a high barrier against particles and fibres smaller than 1 µm, is extremely low-lint, antistatic and silicone-free. These protective coveralls are ideal for handling pharmaceuticals, in the chemical process industry, the oil and gas sector, for maintenance work and for painting tasks in the automotive industry.The Tyvek® 500 Xpert protective coveralls are certified according to Regulation (EU) 2016/425 and meet the requirements for chemical protective clothing Category III, Type 5-B and 6-B. Thanks to the optimised design, they offer very low inward leakage and are suitable for cleanrooms of GMP class C/D.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:reliable protection and high wearing comfort for demanding work environmentsergonomic cut with three-piece hood for a secure fitexternal seams and elasticated bands on hood, sleeves, leg ends and back areaTyvek® zip with cover and large slider for easy donning and doffingmaterial made from fine, spun continuous polyethylene fibresair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against particles and fibres smaller than 1 µmextremely low-lint, antistatic and silicone-free
not available
From
€6.20
1 Stück
New
DuPont™ Tychem® 6000 F sleeve PS32LA
DuPont™ Tychem® 6000 F sleeve PS32LAThe DuPont™ Tychem® 6000 F arm sleeves PS32LA provide reliable partial body protection for demanding work areas with high hazard potential. With a length of approx. 50 cm and wide elasticated bands at the wrist and upper arm, they ensure a secure fit and high wearing comfort. Made from a lightweight yet extremely robust material in which a proprietary barrier film is laminated onto a durable Tyvek® substrate, the arm sleeves combine protection and flexibility. The seams are additionally sealed with barrier tape, significantly increasing the protective performance and durability.The arm sleeves offer an exceptionally high barrier against the permeation of numerous chemicals and reliably protect against organic as well as highly concentrated inorganic chemicals, even under pressure. In addition, they protect against particles, infectious agents and certain chemical warfare agents. The DuPont™ Tychem® 6000 F arm sleeves PS32LA are certified in accordance with Regulation (EU) 2016/425 as partial body protection category III, type PB 3‑B, meet the requirements of EN 14126 for protective clothing against infectious agents and are antistatic on the inside in accordance with EN 1149‑1. They are used, among other applications, in chemical accident clean-up, emergency response operations as well as in military and petrochemical environments.Properties of DuPont™ Tychem® 6000 F sleeve PS32LA at a glance:reliable partial body protection for demanding work areasapprox. 50 cm length for extended arm protectionwide elasticated bands at the wrist and upper arm for a secure fithigh wearing comfort with a firm holdlightweight and extremely robust materialproprietary barrier film on durable Tyvek® substratesealed seams with barrier tape for increased protective performancevery high barrier against the permeation of numerous chemicalsprotection against organic and highly concentrated inorganic chemicalssuitable for use even with chemical exposure under pressurecertified according to EU Regulation 2016/425, type PB [3-B] and EN 14126antistatic on the inside in accordance with EN 1149-1
not available
From
€2.62
1 Stück
Matching accessories
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.65
1 Stück
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.75
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.83
1 Stück
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.80
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
The Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.
* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.
Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:
- sterile arm cuffs, gamma-sterilised for cleanrooms
- edged inner seams for additional protection
- covered elasticated cuffs and biceps
- breathable and low-linting for high wearing comfort
- suitable for ISO class 5-9 and GMP class A/B cleanrooms
- sterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
Functional range
Cleanrooms: ISO class 5-9, GMP class A/B
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tyvek |
| Norms: |
        |
Certifications / Standards
| ISO 11137 - Sterilization of health care products |
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| product information |
| Suitable for use in cleanrooms ISO class 5-9, GMP class A/B. Observe instructions for use. |
Overview all norms of DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Supplier-informations
| address: | DuPont De Nemours (Luxembourg) S.à.r.l.; 2, Rue General Patton, 5326 Luxembourg |
| e-mail: | www.dupont.com |
| EAN(s): |
Carton 5450208100234 |
| manufacturer art.-no.: | D15560753 |
Buy together with
Ansell TouchNTuff® 73-500, cleanroom gloves
Ansell TouchNTuff® 73-500, cleanroom glovesThe Ansell TouchNTuff® 73-500 is a sterile disposable neoprene glove, ideal for use in ISO Class 5 cleanrooms. With a sterility assurance level (SAL) of 10-⁶, it ensures the highest hygiene requirements and effectively protects against chemical splashes in various hazards. The latex-free glove is particularly versatile, as it can be worn both as an outer glove and as an underglove, offering a high level of comfort and reliable safety.Features of the Ansell TouchNTuff® 73-500, cleanroom gloves at a glance:sterile disposable glove made of neoprene (polychloroprene) for the cleanroomISO class 5 cleanroom suitabilitySterility assurance level (SAL) of 10-6can be worn both as an outer glove and as an undergloveexcellent protection against chemical splashes from a wide range of hazardslatex-free
not available
From
€234.50
100 Paar
Face masks type II, 3-ply | PP
Face masks type II, 3-ply made of PP from HygostarThis medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.Hygiene with colour system: surgical mask and mouthguard also in black or pinkAt Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.Advantages of the face masks type II, 3-ply at a glance:3-layer, soft PP fleecefilter performance of 98 % BFEcan be worn behind the ear with elastic bands, latex-freeintegrated nose clip, anatomically formable for a good fitfor single usefor external protection (protection against droplet infection) in the hospital and care sectorpharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)Suitable wall holder for mouthguard boxes:art.-no. 88934: Stainless steel mouth guard dispenserMaterialinfo: What is PP?PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.What is a medical face mask type II?Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
not available
From
€1.69
100 Stück
Safety goggles, ventilated | PVC
Safety goggles ventilated, PVC
This is made of transparent, pleasantly soft PVC with polycarbonate lenses. Thanks to the integrated air valves, they are ventilated and thus offer a high level of wearing comfort. In addition, the safety goggles are very suitable as over-glasses for spectacle wearers. They are particularly comfortable and fit snugly, and thanks to the elastic band, the safety goggles sit close to the face. The safety goggles reliably protect your eyes from dust, non-corrosive liquids and splashes.
Important properties of the safety goggles ventilated at a glance:
ventilated, integrated air valves
very comfortable to wear
elastic headband, individually adjustable
against minor mechanical shocks (F)
suitable for wearers of glasses
not available
From
€1.03
1 Stück
ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESD
ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESDCertified according to EN ISO 20345:2022 S1PS ESD, the BRICE Air XXTM white Low provides metal-free, anti-magnetic protection for use in electronically sensitive environments. The ESD function ensures permanent grounding of the feet and continuously balances voltage differences. The upper made of soft, water-repellent microfiber dries quickly, while the breathable textile lining efficiently absorbs and releases sweat. Ventilation openings on the sides improve airflow. Plastic toe cap, textile penetration protection, and colored labels for marking and area access make the shoe fully safe and functional. The PU outsole with BASF Infinergy® offers slip resistance and excellent cushioning for long periods of standing and walking.Properties of ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESD at a glance:metal-free and anti-magnetic for sensitive work areassoft microfiber upper quick-drying and breathableplastic toe cap, textile penetration protection, and marking functionPU outsole with Infinergy® for slip-resistant cushioningcoloured tear-off label for marking according to area of applicationcertified according to EN ISO 20345:2022 S1PS ESD
not available
From
€79.55
1 Paar
Respirators FFP2 NR, horizontally foldable | PP
Respirators FFP2 NR, horizontally foldable made of PP by Hygostar
These respirators of category FFP2 NR are of very high quality. They protect against solid and liquid harmful dusts, smoke and aerosols. In addition, FFP2 masks reduce the absorption and transmission of infectious agents. With FFP2 NR respirators, you also meet strict requirements in sensitive hygiene areas. The masks are suitable for use in medicine, laboratories, nursing, hospitals as protective equipment, industry and food production. Thanks to the head straps, the protective masks fit very tightly and comfortably - no pressing behind the ears. The integrated nose clip is mouldable - for a very good seal and high wearing comfort.
Features of the respirators FFP2 NR, horizontally foldable at a glance:
high-quality PP fleece, folded horizontally
with headband for a firm fit
with mouldable noseband
free of latex, FFP 2 NR
reduces the absorption and transmission of infectious agents
very comfortable even when worn for long periods
protection against solid and liquid harmful dusts, smoke and aerosols
not available
From
€35.65
100 Stück
More from this brand
DuPont™ Tyvek® 600 Plus Protective Coverall CHA5
DuPont™ Tyvek® 600 Plus Protective Coverall CHA5The DuPont™ Tyvek® 600 Plus protective coverall CHA5 with hood features taped seams, thumb loops and tunnelled elasticated bands at wrists, ankles and face, significantly reducing the risk of contamination. The self-adhesive chin flap ensures a tight seal around respiratory masks, while the Tyvek® zip with cover provides additional safety.Tyvek® is made from fine, spun continuous fibres of high-density polyethylene and is air and water vapour permeable while repelling water-based liquids and spray mist. The fabric offers a very high barrier against fine particles and is antistatic and low-lint, without the addition of silicone. Tyvek® 600 Plus is certified according to EU Regulation 2016/425 and meets the requirements for chemical protective clothing Category III, Type 4-B, 5-B and 6-B as well as EN 14126 for protection against infectious agents.Typical applications include maintenance and decommissioning work in the nuclear industry, pharmaceutical production, research laboratories, biosafety areas and medical applications in compliance with local regulations. The suit is also suitable for cleanrooms of GMP class C/D and, thanks to its ergonomic design and optimised fit, provides maximum protection while ensuring high comfort.Properties of DuPont™ Tyvek® 600 Plus Protective Coverall CHA5 at a glance:protective coverall with hood and taped seamsthumb loops and tunnelled elasticated bands at wrists, ankles and faceself-adhesive chin flap for a tight seal around respiratory masksTyvek® zip with cover for additional safetymaterial made from high-density polyethylene, air and water vapour permeablerepellent to water-based liquids and spray misthigh barrier against fine particles, antistatic, low-lint and silicone-freesuitable for nuclear industry, pharmaceutical production, research laboratories, biosafety areas and medical applicationsusable in cleanrooms of GMP class C/D
not available
From
€6.65
1 Stück
DuPont™ Tyvek® 500 Labcoat PL309NP
DuPont™ Tyvek® 500 Labcoat PL309NPDuPont™ Tyvek® 500 lab coat PL309NP offers reliable protection and high wearing comfort for demanding work environments. The lab coat features a practical zip and collar, with internal seams and covered elasticated bands at the sleeve ends for a secure fit. It is designed without pockets to minimise the risk of contamination. Tyvek® is made from fine, spun continuous fibres of high-density polyethylene, combining protection, durability and breathability.The material is air and water vapour permeable, repellent to water-based liquids and spray mist, and provides a high barrier against fine particles. In addition, it is antistatic, low-lint and silicone-free. The lab coat is certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], and complies with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Typical applications include handling pharmaceuticals, chemical protection, lead and asbestos removal, maintenance work, spray painting and general cleaning tasks.Properties of DuPont™ Tyvek® 500 Labcoat PL309NP at a glance:lab coat with practical zip and collarinternal seams and covered elasticated bands at sleeve ends for a secure fitno pockets to minimise contamination risksmaterial made from high-density polyethylene, combining protection, durability and breathabilityair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against fine particles, antistatic, low-lint and silicone-free
not available
From
€4.03
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.70
1 Stück
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.65
1 Stück
New
DuPont™ Tychem® 6000 F lab coat 0290
DuPont™ Tychem® 6000 F lab coat 0290The DuPont™ Tychem® 6000 F lab coat 0290 is a shin-length laboratory coat with a back closure and provides reliable partial body protection in particularly demanding working environments. The opening at the back is closed with ties and additionally secured with a hook-and-loop fastener at the neck, while the stand-up collar supports improved tightness in the neck and throat area. Knitted cuffs with a double cuff system and elasticated arm endings ensure increased protection, a secure connection to gloves and at the same time high wearing comfort thanks to the inner knitted cuff. The coat is made from a lightweight and durable material consisting of a high-performance barrier film laminated onto a hard-wearing Tyvek® substrate. Stitched seams sealed with barrier tape increase protection and durability.The DuPont™ Tychem® 6000 F lab coat provides excellent protection against a wide range of chemicals and helps protect personnel from toxic organic industrial chemicals, highly concentrated inorganic chemicals even under pressure, particles, biological hazards and certain chemical agents. It is used in a wide variety of applications, ranging from chemical clean-up operations and emergency response to military and petrochemical environments. The coat is certified according to EU Regulation 2016/425 as partial body protection category III type PB [3-B], meets EN 14126 for protective clothing against infectious agents and is antistatic on the inside in accordance with EN 1149-1.Properties of DuPont™ Tychem® 6000 F lab coat 0290 at a glance:shin-length lab coat for reliable partial body protectionback closure with ties and additional hook-and-loop fastener at the neckstand-up collar for improved tightness in the neck and throat areaknitted cuffs with double cuff systemelasticated arm endings for secure glove connectionhigh wearing comfort thanks to inner knitted cuffhigh-performance barrier film laminated onto Tyvek® substratestitched seams sealed with barrier tape for increased protectionvery high protection against organic and highly concentrated inorganic chemicalssuitable also for chemical exposure under pressurefor chemical clean-up, emergency response as well as military and petrochemical applicationscertified according to EU Regulation 2016/425, type PB [3-B] and EN 14126antistatic on the inside in accordance with EN 1149-1
not available
From
€22.30
1 Stück
DuPont™ Tyvek® 500 Hood PH30L0
DuPont™ Tyvek® 500 Hood PH30L0The hood features a wide collar and elastic bands on the face and neck for improved protection. It was developed to protect particularly exposed areas and is at the same time permeable to air and water vapor as well as repellent to water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Hood PH30L0 at a glance:Hood with wide collar and elastic bands at the face opening and neckis intended to provide even better protection for particularly exposed parts of the bodypermeable to air and water vapor repellent to water-based liquids and spray mist
not available
From
€1.08
1 Stück