DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
Chemical protection gowns, cleanroom gowns
- chemo gown with collar and Velcro fastener at the neck
- with overlock seams and knitted cuffs
- framed waist bands, attached to the elastic sides
- ideal for handling cytostatics
- manufactured in controlled environments
- suitable for use in GMP class C/D cleanrooms (ISO class 6-9)
Similar articles
Skip product gallery
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS
DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TSDuPont™ Tyvek® IsoClean® suit without hood, model IC 183 B WH TS, made of high-density polyethylene, manufactured using the flash spinning process. The bound inner seams reduce the penetration of liquids and particles. Tyvek® IsoClean® protects against particles, micro-organisms and non-hazardous water-based liquid splashes. The suit meets the requirements of chemical protective clothing category III, type 5-B and 6-B, EN 14126 for protection against infection and EN 1073-2 for protection against radioactive contamination. Aseptically folded and packed in an ISO Class 4 certified cleanroom. The double-barrier packaging system reduces the risk of contamination. Traceability of sterilised garments with certificate of sterility. Suitable for GMP class A/B (ISO class 5) cleanrooms.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom suit IC 183 B WH TS at a glance:sterile cleanroom suit without hood, gamma-sterilizedseams on the inside of the garmentcovered elastic at arm and leg ends and in the back areafront zipper with zipper coverDuPont™ Tyvek® edged elastic thumb loopsbreathable and low-lintingaseptically foldedprocessed and sterilized under cleanroom conditions (sterility assurance level (SAL) of 10-6 (ISO 11137-1))suitable for use in GMP class A/B (ISO class 5)* cleanrooms
not available
From
€11.65
1 Stück
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.75
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.60
1 Paar
DuPont™ Tyvek® 500 Labcoat PL309NP
DuPont™ Tyvek® 500 Labcoat PL309NPDuPont™ Tyvek® 500 lab coat PL309NP offers reliable protection and high wearing comfort for demanding work environments. The lab coat features a practical zip and collar, with internal seams and covered elasticated bands at the sleeve ends for a secure fit. It is designed without pockets to minimise the risk of contamination. Tyvek® is made from fine, spun continuous fibres of high-density polyethylene, combining protection, durability and breathability.The material is air and water vapour permeable, repellent to water-based liquids and spray mist, and provides a high barrier against fine particles. In addition, it is antistatic, low-lint and silicone-free. The lab coat is certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], and complies with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Typical applications include handling pharmaceuticals, chemical protection, lead and asbestos removal, maintenance work, spray painting and general cleaning tasks.Properties of DuPont™ Tyvek® 500 Labcoat PL309NP at a glance:lab coat with practical zip and collarinternal seams and covered elasticated bands at sleeve ends for a secure fitno pockets to minimise contamination risksmaterial made from high-density polyethylene, combining protection, durability and breathabilityair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against fine particles, antistatic, low-lint and silicone-free
not available
From
€4.03
1 Stück
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5DuPont™ Tyvek® 500 Xpert protective coveralls provide reliable protection and high wearing comfort for demanding work environments. The suit features an ergonomic cut and a three-piece hood that fits perfectly to the head and face, ensuring a secure fit even during movement. External seams, elasticated bands on the hood, sleeve and leg ends, as well as an integrated elastic band in the back area, guarantee an excellent fit. The Tyvek® zip with cover and large slider makes donning and doffing easy.The Tyvek® material consists of fine, spun continuous polyethylene fibres. It is permeable to air and water vapour while repelling water-based liquids and spray mist. Tyvek® offers a high barrier against particles and fibres smaller than 1 µm, is extremely low-lint, antistatic and silicone-free. These protective coveralls are ideal for handling pharmaceuticals, in the chemical process industry, the oil and gas sector, for maintenance work and for painting tasks in the automotive industry.The Tyvek® 500 Xpert protective coveralls are certified according to Regulation (EU) 2016/425 and meet the requirements for chemical protective clothing Category III, Type 5-B and 6-B. Thanks to the optimised design, they offer very low inward leakage and are suitable for cleanrooms of GMP class C/D.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:reliable protection and high wearing comfort for demanding work environmentsergonomic cut with three-piece hood for a secure fitexternal seams and elasticated bands on hood, sleeves, leg ends and back areaTyvek® zip with cover and large slider for easy donning and doffingmaterial made from fine, spun continuous polyethylene fibresair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against particles and fibres smaller than 1 µmextremely low-lint, antistatic and silicone-free
not available
From
€6.10
1 Stück
DuPont™ Tychem® 6000 F lab coat 0290
DuPont™ Tychem® 6000 F lab coat 0290The DuPont™ Tychem® 6000 F lab coat 0290 is a shin-length laboratory coat with a back closure and provides reliable partial body protection in particularly demanding working environments. The opening at the back is closed with ties and additionally secured with a hook-and-loop fastener at the neck, while the stand-up collar supports improved tightness in the neck and throat area. Knitted cuffs with a double cuff system and elasticated arm endings ensure increased protection, a secure connection to gloves and at the same time high wearing comfort thanks to the inner knitted cuff. The coat is made from a lightweight and durable material consisting of a high-performance barrier film laminated onto a hard-wearing Tyvek® substrate. Stitched seams sealed with barrier tape increase protection and durability.The DuPont™ Tychem® 6000 F lab coat provides excellent protection against a wide range of chemicals and helps protect personnel from toxic organic industrial chemicals, highly concentrated inorganic chemicals even under pressure, particles, biological hazards and certain chemical agents. It is used in a wide variety of applications, ranging from chemical clean-up operations and emergency response to military and petrochemical environments. The coat is certified according to EU Regulation 2016/425 as partial body protection category III type PB [3-B], meets EN 14126 for protective clothing against infectious agents and is antistatic on the inside in accordance with EN 1149-1.Properties of DuPont™ Tychem® 6000 F lab coat 0290 at a glance:shin-length lab coat for reliable partial body protectionback closure with ties and additional hook-and-loop fastener at the neckstand-up collar for improved tightness in the neck and throat areaknitted cuffs with double cuff systemelasticated arm endings for secure glove connectionhigh wearing comfort thanks to inner knitted cuffhigh-performance barrier film laminated onto Tyvek® substratestitched seams sealed with barrier tape for increased protectionvery high protection against organic and highly concentrated inorganic chemicalssuitable also for chemical exposure under pressurefor chemical clean-up, emergency response as well as military and petrochemical applicationscertified according to EU Regulation 2016/425, type PB [3-B] and EN 14126antistatic on the inside in accordance with EN 1149-1
not available
From
€22.30
1 Stück
Matching accessories
Skip product gallery
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WSThe Tyvek® IsoClean® IC 501 B WH WS gauntlet is made of high-density polyethylene, manufactured using the flash spinning process, and offers protection against particles, microorganisms and liquid splashes. With a length of 45 cm, it is certified as PPE category III, type PB [6-B], and fulfils EN 14126 for infection protection. Suitable for ISO class 5-9 cleanrooms, GMP class A/B*. Aseptically folded and packed in ISO class 5 cleanroom. The double barrier packaging system minimises the risk of contamination. Traceability of the sterile arm cuffs guaranteed by sterility certificate.* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1.Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Sleeve IC 501 B WH WS at a glance:sterile arm cuffs, gamma-sterilised for cleanroomsedged inner seams for additional protectioncovered elasticated cuffs and bicepsbreathable and low-linting for high wearing comfortsuitable for ISO class 5-9 and GMP class A/B cleanroomssterility safety factor SAL of 10-⁶ in accordance with ISO 11137-1
not available
From
€2.60
1 Paar
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.75
1 Paar
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS
DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WSDuPont™ Tyvek® IsoClean® hood IC 689 B WH WS with integrated mask and adjustable straps in the chest area. Made from high-density polyethylene using the flash spinning process. Tyvek® IsoClean® protects against particles, micro-organisms and water-based liquid splashes. Certified as partial body protection, category III, type PB [6-B], and complies with EN 14126 for infection protection. The sterile, blue cleanroom mask made of pleated polyethylene (17.5 cm wide) is firmly attached to the hood, prevents particles from escaping and makes it easier to put on. No PPE face mask (no FFP mask). The hood is aseptically folded and packaged in ISO class 5 cleanrooms. Double barrier packaging system minimises contamination risks. Complete traceability thanks to sterility certificate. Suitable for GMP class A/B cleanrooms (ISO class 5).* Provided that the number and size of particles measured per m3 of air in the cleanrooms remain within the limits defined by Good Manufacturing Practice Annex 1 or ISO 14644-1. Properties of the DuPont™ Tyvek® IsoClean® Cleanroom Hood with integrated mask IC 689 B WH WS at a glance:hood with mask and straps, gamma sterilisededged inner seams for more protectionface opening minimises particle releasebreathable and low-lintingaseptically foldedsuitable for GMP class A/B cleanrooms (ISO class 5)gamma-sterilised under cleanroom conditions, SAL of 10-⁶ (ISO 11137-1)
not available
From
€4.83
1 Stück
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)
The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:
- chemo gown with collar and Velcro fastener at the neck
- with overlock seams and knitted cuffs
- framed waist bands, attached to the elastic sides
- ideal for handling cytostatics
- manufactured in controlled environments
- suitable for use in GMP class C/D cleanrooms (ISO class 6-9)
Functional range
Cleanrooms: GMP class C/D (ISO class 6-9)
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tyvek |
| Norms: |
        |
Certifications / Standards
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 T6 - Protective clothing against liquid chemicals, type 6 |
| product information |
| Suitable for contact with cytostatics, follow instructions for use. |
| Suitable for use in cleanrooms ISO class 6-9, GMP class C/D. Observe instructions for use. |
Overview all norms of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
Download all documents for your product here:
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
Supplier-informations
| address: | DuPont De Nemours (Luxembourg) S.à.r.l.; 2, Rue General Patton, 5326 Luxembourg |
| e-mail: | www.dupont.com |
| EAN(s): |
Carton 5450208018447 Package 5450208018379 |
| manufacturer art.-no.: | D15542351 |
Buy together with
Skip product gallery
Ansell TouchNTuff® 73-500, cleanroom gloves
Ansell TouchNTuff® 73-500, cleanroom glovesThe Ansell TouchNTuff® 73-500 is a sterile disposable neoprene glove, ideal for use in ISO Class 5 cleanrooms. With a sterility assurance level (SAL) of 10-⁶, it ensures the highest hygiene requirements and effectively protects against chemical splashes in various hazards. The latex-free glove is particularly versatile, as it can be worn both as an outer glove and as an underglove, offering a high level of comfort and reliable safety.Features of the Ansell TouchNTuff® 73-500, cleanroom gloves at a glance:sterile disposable glove made of neoprene (polychloroprene) for the cleanroomISO class 5 cleanroom suitabilitySterility assurance level (SAL) of 10-6can be worn both as an outer glove and as an undergloveexcellent protection against chemical splashes from a wide range of hazardslatex-free
not available
From
€295.50
100 Paar
Face masks type II, 3-ply | PP, ties
Face masks type II, 3-ply made of PP with ties by Hygostar
The face mask type II is 3-layer and approved for medical use. The masks achieve an excellent filtering performance of 98% BFE. Thus, they are suitable as foreign protection in hospital, medical and nursing. The face mask covers the mouth and nose and protects against droplet infections. The masks are worn with tie straps. Simply tie at the desired length at the back of the head. Nice side effect: No pressure behind the ears and a comfortable wearing feeling over a long time.
Features of the Face masks type II, 3-ply with ties at a glance:
3-layer medical mask made of PP fleece
meets the "Type II" standard
excellent filtering performance, 98 % BFE
tie straps for tight fit, no pressure behind the ears
malleable nosepiece, individually adjustable
for single use
for external protection in hospital and care areas, prevents droplet infection
not available
From
€2.79
100 Stück
Multipurpose glasses for spectacle wearer
Multipurpose glasses for spectacle wearerThese safety goggles are ideal for wearing over regular glasses. The clear lenses are made of polycarbonate and therefore highly scratch-resistant. These goggles are also suitable for use as laboratory safety glasses.
not available
From
€1.19
1 Stück
ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESD
ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESDCertified according to EN ISO 20345:2022 S1PS ESD, the BRICE Air XXTM white Low provides metal-free, anti-magnetic protection for use in electronically sensitive environments. The ESD function ensures permanent grounding of the feet and continuously balances voltage differences. The upper made of soft, water-repellent microfiber dries quickly, while the breathable textile lining efficiently absorbs and releases sweat. Ventilation openings on the sides improve airflow. Plastic toe cap, textile penetration protection, and colored labels for marking and area access make the shoe fully safe and functional. The PU outsole with BASF Infinergy® offers slip resistance and excellent cushioning for long periods of standing and walking.Properties of ELTEN® BRICE Air XXTM white Low 710551, safety half shoes S1PS ESD at a glance:metal-free and anti-magnetic for sensitive work areassoft microfiber upper quick-drying and breathableplastic toe cap, textile penetration protection, and marking functionPU outsole with Infinergy® for slip-resistant cushioningcoloured tear-off label for marking according to area of applicationcertified according to EN ISO 20345:2022 S1PS ESD
not available
From
€79.55
1 Paar
Respirators FFP3 NR with valve, vertically foldable | PP
Respirators FFP3 NR with valve, vertically foldable made of PP by HygostarThe FFP3 respirators with valve meet the highest category of respiratory protection filter classes. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. They are particularly suitable for sensitive areas where hygiene and protection against infection are top priorities. These include medicine, laboratory, nursing, hospital as protective equipment, industry and food industry. the respirators FFP3 NR have an integrated valve. So you breathe noticeably easier and more comfortable. The masks are fixed with head band - without pressing behind the ear. So the FFP3 masks feel comfortable even when worn for long periods.Features of the respirators FFP3 NR with valve, vertically foldable at a glance:high wearing comforthigh-quality material made of PP fleecevertically folded, large breathing surfacevalve facilitates inhalation and exhalationwith head band - no pressure behind the earwith clip for easier putting on and taking off of the maskflexible nose clip for tight fiteach mask individually packed in a hygienic bag, 10 x 10 bags in a box
not available
From
€63.05
100 Stück