DuPont™ Tychem® 2000 C boot cover BOBA
- knee-high with slip-resistant sole
- reliable protection in areas with high chemical and hygiene demands
- splash-proof Tyvek® with polymer coating
- taped seams for added safety
- antistatic
Similar articles
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00DuPont™ Tyvek® IsoClean® overboots IC458B00 with slip-resistant Gripper™ sole offer reliable protection and high wearing comfort in one. The overboots feature covered elasticated bands at calves and leg ends as well as ankle ties to ensure a secure fit. Bound, internal seams provide additional stability.Tyvek® IsoClean® is made from high-density polyethylene, manufactured using the patented flash-spinning process, and offers an effective barrier against particles, microorganisms and harmless splashes of water-based liquids. The material is breathable, extremely low-lint and antistatic. They are compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353).The overboots are not processed under cleanroom conditions and not sterilised, but are manufactured in a controlled environment. They are suitable for use in cleanrooms of GMP class C/D as well as in industries such as biotechnology, pharmaceuticals, medical technology, food processing, cosmetics and electronics. Certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], they also comply with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Properties of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00 at a glance:overboots with slip-resistant Gripper™ sole for secure footingcovered elasticated bands at calves and leg ends as well as ankle ties for a firm fitbound, internal seams for added stability made from high-density polyethyleneeffective barrier against particles, microorganisms and splashes of water-based liquidsbreathable, extremely low-lint and antistaticnot sterilised but manufactured in a controlled environmentsuitable for cleanrooms of GMP class C/Dcompatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353)
not available
From
€1.37
1 Stück
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile
DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterileTyvek® IsoClean® is made of high-density polyethylene and offers protection against particles, microorganisms and splashes of water-based liquids thanks to the patented flash spinning process. The overboots fulfil PPE category III, type PB [6-B], in accordance with EN 14126, and are aseptically folded and packaged in an ISO class 4 cleanroom. The double barrier packaging system reduces contamination risks, while traceability is guaranteed by a sterility certificate. Suitable for GMP class A/B (ISO class 5) cleanrooms.Properties of the DuPont™ Tyvek® IsoClean® Slip-retardant Boot Cover IC 458 B WH MS, sterile at a glance:sterile overboots for cleanrooms, gamma-sterilisedinternal seams are edged for extra protectionfitted with covered elasticated leg opening and ankle lacingGripper™ soles provide improved slip resistance and durabilitylow-linting and breathable material propertiesaseptically folded for easy donningmanufactured under cleanroom conditions and gamma-sterilised with a sterility safety factor SAL of 10-⁶ (ISO 11137-1)ideal for use in GMP class A/B cleanrooms (ISO class 5)
not available
From
€5.50
1 Paar
Overboots | SMS/PE
Overboots made of SMS, PE coated by Hygostar
The overboots are made of high-quality SMS material. SMS is a soft, 3-layer material for disposable clothing. It consists of 2 layers of PP fleece with a middle layer of meltblown. This structure ensures that SMS is water-repellent and air permeable. Thanks to PE-coated outer layer, SMS overboots are even more waterproof and liquid-repellent. The disposable boots protect against minor mechanical hazards in sensitive hygiene areas. Dirt and contamination are minimized. The overboots can be worn over normal clothing. They are especially suitable for industrial and food areas. The PVC sole provides a non-slip tread.
Features of the overboots made of SMS/PE at a glance:
high-quality SMS material: PP, meltblown, PP
water-repellent PE coating
non-slip PVC sole for a safe step
high-quality with tight seams
elastic band on the shaft for a secure hold
can be individually fixed in the appropriate width with tie straps
protection against low superficial mechanical risks
not available
From
€144.50
100 Stück
Chemical protection boot cover Kat. III Typ PB 3B+4B+6B | PP/PE
Chemical protection boot cover Typ PB 3B+4B+6B | PP/PEThese yellow overboots made of laminated PP/PE barrier fabric offer reliable foot protection against chemical splashes and contaminated liquids (type PB 3B/4B/6B). Sealed seams reinforce the barrier, while an elasticated entry and ankle straps ensure a tight fit. The material is antistatic in accordance with EN 1149-5 and resistant to infection in accordance with EN 14126. Universally suitable for use with common protective suits for decontamination, asbestos, painting or pharmaceutical production.Properties of Chemical protection boot cover Typ PB 3B+4B+6B | PP/PE at a glance:CAT III / PB 3B + 4B + 6BPE barrier film laminated on PPsealed long seams – no weak pointselasticated shaft, Bä elasticated shaft, straps attach to the ankleconductive & virus-proof in accordance with EN 14126fits over all common chemical coveralls
not available
From
€113.50
100 Stück
Boot cover with tape Typ PB 4B+6B | microporous
Boot cover with tape Typ PB 4B+6B | microporousThese overboots combine thick microporous fabric with taped seams and non-slip PVC soles. They protect against dense spray and dusty particles (type PB 4B/6B) while remaining breathable. Elasticated cuffs and ankle straps ensure a secure fit. Antistatic according to EN 1149-5 and infection protection according to EN 14126 – ideal for paint booths, nuclear or pharmaceutical areas.Properties of Boot cover with tape Typ PB 4B+6B | microporous at a glance:CAT III / PB 4B + 6B – splash & dustprooftaped nähte, thicker filmprofiled PVC sole – slip-resistantdouble elasticated + ankle strapsantistatic & EN 14126-compliantbreathable membrane – comfortable in continuous use
not available
From
€75.95
100 Stück
Boot cover Typ PB 6B | microporous
Boot cover Typ PB 6B | microporousWhite overboots made of breathable microporous fleece protect shoes from light liquid splashes and hazardous particles. Elasticated cuffs at the opening and ankle guarantee a quick fit without slipping. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection-resistant according to EN 14126 - ideal for cleanrooms, laboratories and the food industry.Properties of Boot cover Typ PB 6B | microporous at a glance:CAT III / PB 6B – basic protectionmicroporös, stops spray & dustrubber top & at the ankle & lint-free, easy to clean;lint-free, low-linting – ISO class 7 suitableantistatic surface EN 1149-5disposable – hygienic & efficient
not available
From
€38.30
100 Stück
DuPont™ Tychem® 2000 C boot cover BOBA
The Tychem® 2000 C BOBA boot cover from DuPont™ reliably complements personal protective equipment in work environments with high chemical and hygiene demands. The knee-high cover with slip-resistant sole offers splash-proof protection, though it is not fully liquid-tight. Made from robust Tyvek® material with a polymer coating, it provides effective protection against inorganic chemicals and infectious agents – even when in contact with pressurised liquids.
Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams offer additional safety. The boot cover is ideally suited for use with Tychem® protective clothing.
Properties of DuPont™ Tychem® 2000 C boot cover BOBA at a glance:
- knee-high cover with slip-resistant sole for secure footing
- splash-proof but not fully liquid-tight
- robust Tyvek® material with polymer coating
- effective protection against inorganic chemicals and infectious agents
- suitable for use even when in contact with pressurised liquids
- certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126
- antistatic properties in line with EN 1149-1
- ideally combinable with Tychem® protective clothing
Functional range
food processing, chemical process Industry, pharmaceutical Industry, pulp and paper manufacturing
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | Tychem |
| Norms: |
     |
Certifications / Standards
| CE 0598 |
| CAT 3 - Personal protective equipment category 3 |
| PPE category 3 protective clothing, protection against chemicals |
| EN 14126 - Protective clothing against infectious agents |
| product information |
Overview all norms of DuPont™ Tychem® 2000 C boot cover BOBA
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
For completed orders you can also download all documents collected in your order overview!
Buy together with
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5
DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5DuPont™ Tyvek® 500 Xpert protective coveralls provide reliable protection and high wearing comfort for demanding work environments. The suit features an ergonomic cut and a three-piece hood that fits perfectly to the head and face, ensuring a secure fit even during movement. External seams, elasticated bands on the hood, sleeve and leg ends, as well as an integrated elastic band in the back area, guarantee an excellent fit. The Tyvek® zip with cover and large slider makes donning and doffing easy.The Tyvek® material consists of fine, spun continuous polyethylene fibres. It is permeable to air and water vapour while repelling water-based liquids and spray mist. Tyvek® offers a high barrier against particles and fibres smaller than 1 µm, is extremely low-lint, antistatic and silicone-free. These protective coveralls are ideal for handling pharmaceuticals, in the chemical process industry, the oil and gas sector, for maintenance work and for painting tasks in the automotive industry.The Tyvek® 500 Xpert protective coveralls are certified according to Regulation (EU) 2016/425 and meet the requirements for chemical protective clothing Category III, Type 5-B and 6-B. Thanks to the optimised design, they offer very low inward leakage and are suitable for cleanrooms of GMP class C/D.Properties of DuPont™ Tyvek® 500 Xpert Protective Coverall CHF5 at a glance:reliable protection and high wearing comfort for demanding work environmentsergonomic cut with three-piece hood for a secure fitexternal seams and elasticated bands on hood, sleeves, leg ends and back areaTyvek® zip with cover and large slider for easy donning and doffingmaterial made from fine, spun continuous polyethylene fibresair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against particles and fibres smaller than 1 µmextremely low-lint, antistatic and silicone-free
not available
From
€5.90
1 Stück
DuPont™ Tyvek® 600 Plus Protective Coverall CHA5
DuPont™ Tyvek® 600 Plus Protective Coverall CHA5The DuPont™ Tyvek® 600 Plus protective coverall CHA5 with hood features taped seams, thumb loops and tunnelled elasticated bands at wrists, ankles and face, significantly reducing the risk of contamination. The self-adhesive chin flap ensures a tight seal around respiratory masks, while the Tyvek® zip with cover provides additional safety.Tyvek® is made from fine, spun continuous fibres of high-density polyethylene and is air and water vapour permeable while repelling water-based liquids and spray mist. The fabric offers a very high barrier against fine particles and is antistatic and low-lint, without the addition of silicone. Tyvek® 600 Plus is certified according to EU Regulation 2016/425 and meets the requirements for chemical protective clothing Category III, Type 4-B, 5-B and 6-B as well as EN 14126 for protection against infectious agents.Typical applications include maintenance and decommissioning work in the nuclear industry, pharmaceutical production, research laboratories, biosafety areas and medical applications in compliance with local regulations. The suit is also suitable for cleanrooms of GMP class C/D and, thanks to its ergonomic design and optimised fit, provides maximum protection while ensuring high comfort.Properties of DuPont™ Tyvek® 600 Plus Protective Coverall CHA5 at a glance:protective coverall with hood and taped seamsthumb loops and tunnelled elasticated bands at wrists, ankles and faceself-adhesive chin flap for a tight seal around respiratory masksTyvek® zip with cover for additional safetymaterial made from high-density polyethylene, air and water vapour permeablerepellent to water-based liquids and spray misthigh barrier against fine particles, antistatic, low-lint and silicone-freesuitable for nuclear industry, pharmaceutical production, research laboratories, biosafety areas and medical applicationsusable in cleanrooms of GMP class C/D
not available
From
€6.35
1 Stück
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00
DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00DuPont™ Tyvek® IsoClean® overboots IC458B00 with slip-resistant Gripper™ sole offer reliable protection and high wearing comfort in one. The overboots feature covered elasticated bands at calves and leg ends as well as ankle ties to ensure a secure fit. Bound, internal seams provide additional stability.Tyvek® IsoClean® is made from high-density polyethylene, manufactured using the patented flash-spinning process, and offers an effective barrier against particles, microorganisms and harmless splashes of water-based liquids. The material is breathable, extremely low-lint and antistatic. They are compatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353).The overboots are not processed under cleanroom conditions and not sterilised, but are manufactured in a controlled environment. They are suitable for use in cleanrooms of GMP class C/D as well as in industries such as biotechnology, pharmaceuticals, medical technology, food processing, cosmetics and electronics. Certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], they also comply with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Properties of DuPont™ Tyvek® Isoclean® Slip-retardant boot cover IC458B00 at a glance:overboots with slip-resistant Gripper™ sole for secure footingcovered elasticated bands at calves and leg ends as well as ankle ties for a firm fitbound, internal seams for added stability made from high-density polyethyleneeffective barrier against particles, microorganisms and splashes of water-based liquidsbreathable, extremely low-lint and antistaticnot sterilised but manufactured in a controlled environmentsuitable for cleanrooms of GMP class C/Dcompatible with the DuPont™ Tyvek® IsoClean® cleanroom coverall IC 183 B WH TS (art. no. TD15560733) or the DuPont™ Tyvek® IsoClean® chemo gown IC 703S 00 (art. no. TD15542353)
not available
From
€1.37
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.40
1 Stück
More from this brand
DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5
DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5DuPont™ Tyvek® 200 Easysafe protective coveralls CHF 5 provide reliable protection while ensuring high wearing comfort. The hooded suit is made from an optimised polyethylene fabric that is soft and breathable, yet offers a higher level of protection than SMS coveralls. With yellow external seams for visual differentiation, elasticated bands on the hood, sleeve and leg ends, as well as a sewn-in elastic band at the back, it ensures a secure fit. The zip with cover further enhances the protective effect. Tyvek® 200 is air and water vapour permeable and provides certified protection according to EU Regulation 2016/425 for chemical protective clothing Category III, Type 5 and 6. The suit is antistatic in accordance with EN 1149-1/5 and meets the requirements for protective clothing against radioactive contamination according to EN 1073-2. Typical areas of application include remediation, industrial cleaning and general production, where a reliable and comfortable protective suit is required.Properties of DuPont™ Tyvek® 200 Easysafe Protective Coveralls CHF 5 at a glance:reliable protection with high wearing comforthooded coverall made from optimised polyethylene fabric, soft and breathablehigher level of protection than SMS coverallsyellow external seams for visual differentiationelasticated bands on hood, sleeve and leg ends as well as sewn-in elastic at the backzip with cover for additional protectionair and water vapour permeable
not available
From
€3.54
1 Stück
DuPont™ Tyvek® 500 Apron PA30L0
DuPont™ Tyvek® 500 Apron PA30L0The calf-length apron made of Tyvek® offers a comfortable and secure fit with its straps in the neck and back area. With a length of 108 cm, it is ideal for reliably protecting particularly exposed parts of the body. Its air and water vapor permeable properties make it comfortable to wear while also repelling water-based liquids and spray mist.Properties of DuPont™ Tyvek® 500 Apron PA30L0 at a glance:Calf-length apron with ties in the neck and back areaLength: 108cmis intended to provide even better protection for particularly exposed parts of the bodypermeable to air and water vapor repellent to water-based liquids and spray mist
not available
From
€1.75
1 Stück
DuPont™ Tyvek® 500 Labcoat PL309NP
DuPont™ Tyvek® 500 Labcoat PL309NPDuPont™ Tyvek® 500 lab coat PL309NP offers reliable protection and high wearing comfort for demanding work environments. The lab coat features a practical zip and collar, with internal seams and covered elasticated bands at the sleeve ends for a secure fit. It is designed without pockets to minimise the risk of contamination. Tyvek® is made from fine, spun continuous fibres of high-density polyethylene, combining protection, durability and breathability.The material is air and water vapour permeable, repellent to water-based liquids and spray mist, and provides a high barrier against fine particles. In addition, it is antistatic, low-lint and silicone-free. The lab coat is certified according to EU Regulation 2016/425 for partial body protection Category III, Type PB [6-B], and complies with EN 14126 for protection against infectious agents and EN 1149-1 for antistatic properties.Typical applications include handling pharmaceuticals, chemical protection, lead and asbestos removal, maintenance work, spray painting and general cleaning tasks.Properties of DuPont™ Tyvek® 500 Labcoat PL309NP at a glance:lab coat with practical zip and collarinternal seams and covered elasticated bands at sleeve ends for a secure fitno pockets to minimise contamination risksmaterial made from high-density polyethylene, combining protection, durability and breathabilityair and water vapour permeable, repellent to water-based liquids and spray misthigh barrier against fine particles, antistatic, low-lint and silicone-free
not available
From
€3.84
1 Stück
DuPont™ Tychem® 2000 C apron PA30L0
DuPont™ Tychem® 2000 C Schürze PA30L0The Tychem® 2000 C apron from DuPont™ offers reliable protection when working with hazardous substances. The calf-length apron with adjustable straps at the neck and waist provides a secure fit and can be flexibly integrated into existing protection concepts. Made from durable Tyvek® material with a polymer coating, it offers effective protection against a wide range of inorganic chemicals and biological hazards – even when in contact with pressurised liquids. Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 provide additional safety. The apron is the ideal complement to the DuPont™ Tychem® 2000 C range.Eigenschaften der DuPont™ Tychem® 2000 C Schürze PA30L0 im Überblick:calf-length apron with adjustable straps at neck and waistsecure fit and flexible integration into existing protection conceptsdurable Tyvek® material with polymer coatingeffective protection against inorganic chemicals and biological hazardssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€4.30
1 Stück
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5
DuPont™ ProShield® 20 SFR Protective Coveralls CHF5ProShield® 20 SFR garments are made from a halogen-free, flame-retardant polypropylene SMS non-woven fabric that provides limited protection against the spread of flame (Index 1) in addition to protection from particles and limited liquid splashes or splashes of water-based liquids. They must always be worn over primary flame retardant protective clothing such as Nomex®.Properties of DuPont™ ProShield® 20 SFR Protective Coveralls CHF5 at a glance:Coverall with limited flame spread (index 1) with hood stitched orange outer seams elastic wrists, ankles, face and waist
not available
From
€5.40
1 Stück
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00
DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00The Tyvek® IsoClean® chemo gown is ideal for handling cytostatics and for various laboratory activities. With an extended apron, it offers secure protection against exposure to hazards from the front. The openings at the back closure increase wearing comfort. The Tyvek® IsoClean® chemo gown is made of HD-PE using the patented flash spinning process. Tyvek® IsoClean® creates an inherent barrier against particles, microorganisms and non-hazardous water-based liquid splashes. The protective gown is certified as category III chemical protective clothing with partial body protection type PB [6-B] as protective clothing against infectious agents in accordance with EN 14126. Testing for antistatic equipment (EN 1149-1). The chemo gowns are neither processed under cleanroom conditions nor have they been exposed to gamma radiation. Rather, they have been manufactured in a controlled environment. Suitable for use in GMP class C/D cleanrooms (ISO class 6-9)The properties of DuPont™ Tyvek® IsoClean® Chemo gown IC 703S 00 at a glance:chemo gown with collar and Velcro fastener at the neckwith overlock seams and knitted cuffsframed waist bands, attached to the elastic sidesideal for handling cytostaticsmanufactured in controlled environmentssuitable for use in GMP class C/D cleanrooms (ISO class 6-9)
not available
From
€6.45
1 Stück