Disposable gloves
Head protection
Patient care
Cleaning agents
Kitchenware
Service gloves Quick&Clean
Organizing systems
Bio disposable tableware
Infection protection
Product highlights
Ansell
Hotel, restaurant & catering
Chemical protection gloves Super High Risk | nitrile
top seller
Chemical protection gloves Super High Risk | nitrile
- disposable strong nitrile gloves
- protect against chemicals and biological hazards
- very good tactile sensitivity for precise work
- non-slip thanks to textured surface
- extra long for more protection, 30cm
- food safe, powder free
You may also be interested in
Overshoes | PP/CPE
Overshoes made of PP with CPE sole by Hygostar
Water-repellent sole and air-permeable upper: These overshoes provide lightweight protection from liquids while allowing feet to breathe. They are made of PP fleece, making them lightweight and comfortable to wear. The sole is made of CPE - durable and water- repellent. The overshoes keep dirt and contaminants out of sensitive hygiene areas. They are therefore ideal for care, industry and food areas.
Features of the overshoes with CPE sole at a glance:
made of soft PP fleece
air-permeable upper for more wearing comfort
water-repellent, robust sole made of CPE
suitable for contact with food
protection against low superficial mechanical risks
Bouffant caps Bettina | PP
Bouffant caps Bettina made of PP by Hygostar
Bouffant caps Bettina are among Hygostar's top sellers. The caps are made of high-quality, pure PP fleece. The material is strong and at the same time soft to the scalp and hair. Bettina bouffant caps have a latex-free rubber band and are therefore always comfortable to wear in daily use. They are universally applicable in many hygiene areas - ideal for example in food industry, industry and cleaning areas.
Properties of the bouffant caps Bettina at a glance:
high-quality fleece made of polypropylene (PP)
air-permeable and comfortable to wear
with elastic band for a good hold, latex-free
approved for contact with food
protection against low superficial mechanical risks
Gowns Duo with perforation | PP/PE
Gowns Duo with perforation made of PP/PE by Hygostar
The gowns Duo with perforation are special gowns that combine 3 products in one: Gown, Apron and Sleeve. Thus, with the duo gowns you are more favourable than buying the individual products and save storage capacity. The front of the gown and the arms have a welded PE layer. It makes these zones liquid-repellent and protects against weakly aggressive cleaning agents. The Duo gowns are made of very high-quality PP. It is soft, breathable and comfortable to wear for a long time. The gowns have a practical tear-off perforation. This means that the gowns can be shortened to different lengths: 141 cm, 126 cm or 111 cm. The gowns are versatile in hygiene areas and are also approved for food areas.
Features of the gowns Duo with perforation at a glance:
3 in 1: combines smock, apron and protective sleeves
smock made of high quality PP
air-permeable at back and shoulders
sleeves and apron made of water-repellent PE
with perforation easily shortenable for different body sizes
at the back with ties
suitable for food
general protection against superficial, minor injuries
Face masks type II, 3-ply | PP
Face masks type II, 3-ply made of PP from Hygostar
This medical mask meets the "Type II" standard. This means it is suitable for medical use and approved for use as third-party protection in hospital and nursing - also as a surgical mask. The Type II mouthguard has been proven to protect against droplet infections. The mask is 3-layered and achieves an excellent filtering performance of 98% BFE thanks to the integrated filter layer.
The disposable masks have ear loops and an adjustable nose clip. Important: Press the nose clip firmly when tightening so that the mask sits as close to the face as possible and can thus develop its full filtering capacity.
Hygiene with colour system: surgical mask and mouthguard also in black or pink
At Franz Mensch you buy mouth masks equal in 6 colours. The wide range of colours is ideal for medical practices, dentists, hospital and nursing, but also for large food production to visually distinguish work areas. Coloured mouthguards or coloured surgical masks can be used as colour coding and area clothing: 1 colour = 1 area. With this simple hygiene colour system, you avoid cross-contamination and ensure clear specifications.
Advantages of the face masks type II, 3-ply at a glance:
3-layer, soft PP fleece
filter performance of 98 % BFE
can be worn behind the ear with elastic bands, latex-free
integrated nose clip, anatomically formable for a good fit
for single use
for external protection (protection against droplet infection) in the hospital and care sector
pharmacy Central Number (PZN) for Art. 29176: PZN 17160819 (50 pieces)
Suitable wall holder for mouthguard boxes:
art.-no. 88934: Stainless steel mouth guard dispenser
Materialinfo: What is PP?
PP is the abbreviation for polypropylene, the standard material for protective clothing and disposable products. Mostly, this synthetic fiber is processed into a soft nonwoven, which is then used to make a textile-like fabric. PP nonwoven is permeable to air, very economical, comfortable and even offers slight protection against liquids because splashes simply roll off.
What is a medical face mask type II?
Only 3-layer masks tested according to EN 14683 are considered medical face masks and protect against infections as foreign body protection. These face masks have an integrated filter layer made of meltblown material, which is particularly fine and can filter the smallest particles from the air. In this way, medical masks provide a high level of protection because they also filter pathogens and prevent their spread or transmission.
Medical mouthguards are classified into the following 3 categories based on their bacterial filtration efficiency (BFE):
Type IIR - highest protection: excellent filter performance of > 98% (according to BFE) and resistant to liquid splashes or contaminated body fluids.
Type II: excellent filter performance of > 98% (according to BFE), reliably protects against contaminated aerosols transmitted via the air.
Type I: good filter performance of > 95% (BFE), cheaper variant with less filter performance than Type II.
Chemical protective gloves Super High Risk made of nitrile by Hygostar
When handling chemicals and biological hazards, you need protective gloves you can rely on. The nitrile gloves Super High Risk they are tested Cat 3 protective glove strong, resilient and safe. At the same time, they fit very well on the hand and offer a lot of sensitivity for precise work.
Here you buy high quality chemical protective gloves made of strong nitrile for single use. Nitrile is chemical resistant, resistant to oils, greases and tight against microorganisms and other biological hazards. With the extended cuff, the gloves are approximately 30 cm long overall, providing protection beyond the wrist. This provides even more protection when handling splashes or liquids.
The chemical protection gloves are elastic and fit like a second skin. In addition, the textured surface facilitates gripping so that you simply work more quickly and accurately. Thanks to these features, the Super High Risk gloves are best suited for laboratory, pharmaceutical industry, emergency services, hospital, nursing, food industry and industry. They are the top seller among chemical gloves at Franz Mensch and have proven themselves for over 15 years.
The properties of the chemical protective gloves Super High Risk at a glance:
- strong nitrile, very robust and tight
- powder-free, no contamination of samples or food by the powder
- non-slip thanks to textured surface
- 30 cm long, protection beyond the wrist
- very robust, durable
- good sense of touch, suitable for fine work
- flexible and elastic for a very good fit
- food safe
- with rolled edge that catches run-off drops
- latex free
- left-right portable
Intended purpose
For third-party protection (protection against germ transmission) in the hospital and care sector
Functional range
for laboratory, pharmaceutical industry, emergency services, hospital, nursing, food industry, industry
Properties
| Powdering: | powder-free |
|---|---|
| Quality level: |
 |
| Type of inner packaging: | cardboard |
| Type of outer packaging: | cardboard |
| chemical resistance: |
|
| material: | nitrile |
| oil and grease resistance : |
 |
| sensitivity: |
 |
Certifications / Standards
| CE 2777 PSA VO (EU) 2016-425 |
| CAT 3 - Personal protective equipment category 3 |
| EN 420:2003+A1:2009 |
| EN 374-5:2016 VIRUS |
| EN ISO 374-1:2016 Typ A KTPSJO |
| MD - Medical device according to Regulation (EU) 2017/745 |
| EN 455 1-4 - Medical Gloves |
| AQL 1,5 - Accepted Quality Level |
| food safe |
Overview all norms of Chemical protection gloves Super High Risk | nitrile
Download all documents for your product here:
Declaration of conformity for food safety
Declaration of conformity for medical devices
Declaration of conformity for personal protective equipment
Technical data sheet
For completed orders you can also download all documents collected in the order overwiev !
Matching accessories
Glove dispenser "Single Long" | Stainless steel
Der Spenderhalter ist aus rostfreiem Edelstahl gefertigt und ist für folgende Chemikalien-Handschuhe geeignet: High RiskSuper High RiskSecuritNeotycoonNeopremdetektierbare Handschuhe
Glove Dispenser "Flex" | Stainless Steel
Stainless steel glove dispenser "Flex" by Hygostar
The glove dispenser "Flex" is the ideal product to store glove boxes safely and hygienically. The dispenser is individually adjustable, since the different widths 200-260mm and depths 40-95 mm can be selected. Finally, the glove dispenser "Flex" does not require much effort for wall mounting.
The features of the Stainless steel glove dispenser "Flex":
made of stainless steel
for glove boxes
safe and hygienic storage
widths 200-260mm and depths 40-95 mm selectable
no much effort for wall mounting