Chemical protection boot cover Kat. III Typ PB 3B+4B+6B | PP/PE
- CAT III / PB 3B + 4B + 6B
- PE barrier film laminated on PP
- sealed long seams – no weak points
- elasticated shaft, Bä elasticated shaft, straps attach to the ankle
- conductive & virus-proof in accordance with EN 14126
- fits over all common chemical coveralls
Similar articles
Boot cover Typ PB 6B | microporous
Boot cover Typ PB 6B | microporousWhite overboots made of breathable microporous fleece protect shoes from light liquid splashes and hazardous particles. Elasticated cuffs at the opening and ankle guarantee a quick fit without slipping. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection-resistant according to EN 14126 - ideal for cleanrooms, laboratories and the food industry.Properties of Boot cover Typ PB 6B | microporous at a glance:CAT III / PB 6B – basic protectionmicroporös, stops spray & dustrubber top & at the ankle & lint-free, easy to clean;lint-free, low-linting – ISO class 7 suitableantistatic surface EN 1149-5disposable – hygienic & efficient
not available
From
€38.30
100 Stück
Boot cover with tape Typ PB 4B+6B | microporous
Boot cover with tape Typ PB 4B+6B | microporousThese overboots combine thick microporous fabric with taped seams and non-slip PVC soles. They protect against dense spray and dusty particles (type PB 4B/6B) while remaining breathable. Elasticated cuffs and ankle straps ensure a secure fit. Antistatic according to EN 1149-5 and infection protection according to EN 14126 – ideal for paint booths, nuclear or pharmaceutical areas.Properties of Boot cover with tape Typ PB 4B+6B | microporous at a glance:CAT III / PB 4B + 6B – splash & dustprooftaped nähte, thicker filmprofiled PVC sole – slip-resistantdouble elasticated + ankle strapsantistatic & EN 14126-compliantbreathable membrane – comfortable in continuous use
not available
From
€75.95
100 Stück
Overboots | SMS/PE
Overboots made of SMS, PE coated by Hygostar
The overboots are made of high-quality SMS material. SMS is a soft, 3-layer material for disposable clothing. It consists of 2 layers of PP fleece with a middle layer of meltblown. This structure ensures that SMS is water-repellent and air permeable. Thanks to PE-coated outer layer, SMS overboots are even more waterproof and liquid-repellent. The disposable boots protect against minor mechanical hazards in sensitive hygiene areas. Dirt and contamination are minimized. The overboots can be worn over normal clothing. They are especially suitable for industrial and food areas. The PVC sole provides a non-slip tread.
Features of the overboots made of SMS/PE at a glance:
high-quality SMS material: PP, meltblown, PP
water-repellent PE coating
non-slip PVC sole for a safe step
high-quality with tight seams
elastic band on the shaft for a secure hold
can be individually fixed in the appropriate width with tie straps
protection against low superficial mechanical risks
not available
From
€141.00
100 Stück
DuPont™ Tychem® 2000 C boot cover BOBA
DuPont™ Tychem® 2000 C boot cover BOBAThe Tychem® 2000 C BOBA boot cover from DuPont™ reliably complements personal protective equipment in work environments with high chemical and hygiene demands. The knee-high cover with slip-resistant sole offers splash-proof protection, though it is not fully liquid-tight. Made from robust Tyvek® material with a polymer coating, it provides effective protection against inorganic chemicals and infectious agents – even when in contact with pressurised liquids.Certified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126, it meets the highest standards for partial body protection. The antistatic properties in line with EN 1149-1 and the taped seams offer additional safety. The boot cover is ideally suited for use with Tychem® protective clothing.Properties of DuPont™ Tychem® 2000 C boot cover BOBA at a glance:knee-high cover with slip-resistant sole for secure footingsplash-proof but not fully liquid-tightrobust Tyvek® material with polymer coatingeffective protection against inorganic chemicals and infectious agentssuitable for use even when in contact with pressurised liquidscertified in accordance with EU Regulation 2016/425, Type PB [3-B] and EN 14126antistatic properties in line with EN 1149-1ideally combinable with Tychem® protective clothing
not available
From
€3.17
1 Stück
DACH SAFE® SafeGuard Boot 974, Cleanroom overboots Type PB 6
DACH SAFE® SafeGuard Boot 974, Cleanroom overboots Type PB 6The DACH SAFE® SafeGuard Boot 974 is an electrostatically dissipative disposable overboot, designed for use in cleanrooms of classes 7–9. Made from particularly robust PP trilaminate, it provides reliable protection against particles, liquids and chemical exposure. The ultrasonic welded seams ensure a continuous barrier against contamination, while the elasticated band at the ankle guarantees a secure fit. As certified Category III Personal Protective Equipment, the overboot meets the requirements of EN 13034, Type PB [6], and has been successfully tested for cleanroom suitability in accordance with IEST-RP-CC003.3 (Helmke Drum, category II).Properties of DACH SAFE® SafeGuard Boot 974, Cleanroom overboots Type PB 6 at a glance:electrostatically dissipative for sensitive cleanroom areasreliable protection against particles, liquids and chemicalsrobust PP trilaminate with ultrasonic welded seamssecure fit thanks to elasticated band at the anklecertified according to EN 13034 Type PB [6] and Helmke Drum category II
not available
From
€131.50
100 Paar
%
Overboots Grey | PP/CPE
Overboots Grey made of PP, CPE coated by Hygostar
The overboots Grey are made of strong PP fleece and are very comfortable to wear. The outside is coated with CPE. The disposable boot fits very well on the leg thanks to an elastic band - no slipping. The PP overboot covers the entire foot well beyond the ankle. The overboots keep dirt and contamination out of sensitive production areas. They are ideal for care, industry or the food industry.
Features of the overboots Grey at a glance:
soft PP fleece, comfortable to wear
with CPE coating
good hold thanks to elasticated shank
Protection against minor superficial mechanical risks
not available
From
€32.75
100 Stück
Chemical protection boot cover Typ PB 3B+4B+6B | PP/PE
These yellow overboots made of laminated PP/PE barrier fabric offer reliable foot protection against chemical splashes and contaminated liquids (type PB 3B/4B/6B). Sealed seams reinforce the barrier, while an elasticated entry and ankle straps ensure a tight fit. The material is antistatic in accordance with EN 1149-5 and resistant to infection in accordance with EN 14126. Universally suitable for use with common protective suits for decontamination, asbestos, painting or pharmaceutical production.
Properties of Chemical protection boot cover Typ PB 3B+4B+6B | PP/PE at a glance:
- CAT III / PB 3B + 4B + 6B
- PE barrier film laminated on PP
- sealed long seams – no weak points
- elasticated shaft, Bä elasticated shaft, straps attach to the ankle
- conductive & virus-proof in accordance with EN 14126
- fits over all common chemical coveralls
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | PP |
| Norms: |
            |
Certifications / Standards
| CE 0624 |
| CAT 3 - Personal protective equipment category 3 |
| EN 14126:2003+AC:2004 - Protective clothing against infectious agents |
| EN 13034:2005+A1:2009 type PB 6B - Protective clothing against liquid chemicals type PB 6B (Partial body protection) |
| EN 14605:2005+A1:2009 type PB 3B - Protective clothing against liquid chemicals, liquid-tight type PB 3B (Partial body protection) |
| EN 14605:2005+A1:2009 type PB 4B - Protective clothing against liquid chemicals, spray-tight type PB 4B (Partial body protection) |
| EN 14325 - Protective clothing for protection against chemicals |
| EN 13688 - General requirements for protective clothing |
| Chemical protection |
| EN 1149-5 - Protective clothing - Electrostatic properties part 5 |
| product information |
| Do not reuse |
Overview all norms of Chemical protection boot cover Kat. III Typ PB 3B+4B+6B | PP/PE
Download all documents for your product here:
Declaration of conformity for personal protective equipment
Further documents
Technical data sheet
For completed orders you can also download all documents collected in your order overview!
More from this brand
CoverPremPro Chemical safety coverall Typ 3B+4B+5B+6B | PP/PE
CoverPremPro Chemical safety coverall Typ 3B+4B+5B+6B | PP/PEThe CoverPremPro disposable coverall was developed for situations with a high risk potential. The laminated PP/PE material offers liquid-tight (Type 3B), spray-tight (Type 4B) and particle-tight (Type 5B/6B) protection. Strong welded seams, a double zip cover and the 3-panel hood prevent the penetration of aggressive chemicals. Elasticated cuffs at the waist, arms and ankles optimise the fit, while the generous cut allows maximum freedom of movement. Antistatic according to EN 1149-5, infection protection EN 14126 and protection against radioactive contamination (EN 1073-2) – ideal for decontamination, emergency and chemical operations.Properties of CoverPremPro chemical protection suit Type 3B+4B+5B+6B | PP/PE at a glance:CAT III – Type 3B / 4B / 5B / 6Bmask not included in the deliveryhigh-performance PP/PE with welded seamsdouble flap over 2-way zip3-piece hood, mask-compatibleelasticated waist, sleeves & ankles – tight sealstatic dissipative, virus & radioisotope safe
not available
From
€6.45
1 Stück
Bib aprons Typ PB 6B | microporous
Bib aprons Typ PB 6B | microporousThis bib apron made of high-quality microporous fleece combines effective splash and particle protection (type PB 6B) with high breathability. The material allows water vapour to escape and at the same time reliably wicks away liquids, blood or oil. With a length of 102 cm, the apron protects the entire front area up to below the knee. Adjustable ties at the neck and waist enable a secure, customised fit and quick donning and doffing. Antistatic properties in accordance with EN 1149-5 and EN 14126 infection protection make it the ideal choice for laboratories, cleanrooms, the food industry and facility services.Properties of Bib aprons Typ PB 6B | microporous at a glance:CAT III / PB 6B (EN 13034)microporous film blocks blood, oil and chemicals102 × 72 cm – protection up to below the kneeenclosed neck & waist;antistatic EN 1149-5, protection against infection EN 14126soft, pleasant to the touch – for long layers
not available
From
€46.25
100 Stück
Labcoat with knitted cuffs Typ PB 6B | microporous
Labcoat with knitted cuffs Typ PB 6B | microporousThe lab coat combines outstanding barrier performance with ergonomic design. The microporous fleece blocks liquid splashes and solid particles while remaining breathable. A concealed zip fastener makes it quick to put on and take off, while soft knitted cuffs create a tight transition to gloves. The classic shirt collar prevents pressure points and ensures a neat appearance. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection protection according to EN 14126 - ideal for laboratories, pharmaceuticals and biotech.Properties of Labcoat with knitted cuffs Typ PB 6B | microporous at a glance:CAT III / PB 6B in accordance with EN 13034breathable multi-layer film, low-lintingconcealed zip – no hangingknitted bandszip - no catchingantistatic ESD-compliant (EN 1149-5)lightweight, snug – comfortable for long periods of wear
not available
From
€1.36
1 Stück
Hood Cat. III Typ PB 6B | microporous
Hood Typ PB 6B | microporousThe disposable hoods are made of multi-layer, microporous fleece, which forms a highly effective barrier against water-based liquid splashes, dust and microorganisms while remaining breathable. The half-shoulder length cut covers the head, neck and upper shoulder area without restricting mobility. A circumferential, latex-free elasticated band ensures a tight, non-slip fit. The material is antistatic (EN 1149-5), tear and abrasion resistant and low-linting - ideal for cleanrooms, pharmaceutical production or food processing. PPE certification CAT III according to type PB 6B and infection protection according to EN 14126 guarantee standard-compliant safety.Properties of Hood Typ PB 6B | microporous at a glance:CAT III / EN 13034 PB 6B certifiedAir-permeable barrier material – no heat build-upHalf-shoulder design protects neck & shoulderslatex-free all-round elasticated band, secure fitantistatic finish in accordance with EN 1149-5low-linting & clean – cleanroom compatible
not available
From
€50.75
100 Stück
price reduced
Sleeve Typ PB 6B | microporous
Sleeve Typ PB 6B | microporousThe 40 cm long arm sleeves offer additional forearm protection during activities involving splashes or dust. The microporous fleece blocks liquid splashes and hazardous particles while allowing body moisture to escape. Latex-free rubber bands at the top and bottom ensure a secure, non-slip seal. PPE CAT III type PB 6B, antistatic according to EN 1149-5 and infection protection EN 14126 – ideal for pharmaceuticals, chemicals and cleaning.Properties of Sleeve Typ PB 6B | microporous at a glance:CAT III / PB 6B – tested forearm protection40 cm long, fits over gowns & jacketsAir permeable despite splash barrier latex; air-permeable despite splash barrierlatex-free rubber, no pinchingantistatic EN 1149-5, EN 14126for pharmaceuticals, maintenance, paint & cleaning
not available
From
€12.55
100 Stück
Shoe cover Typ PB 6B | microporous
Shoe cover Typ PB 6B | microporousThe Overshoes are made of microporous film construction keep dust, dirt and light chemical splashes away from your shoes and at the same time prevent particles from entering sensitive areas. The material is soft, lint-free and breathable, and the elasticated band all the way round ensures quick, non-slip donning. PPE CAT III type PB 6B, antistatic in accordance with EN 1149-5 and infection protection EN 14126 – perfect for laboratories, clinics, cleanrooms or construction sites.Properties of Shoe cover Typ PB 6B | microporous at a glance:CAT III / PB 6B (EN 13034)microporous film protects shoes from contaminationlatex-free round gum entry – quick ütighteninglow-linting & quiet – cleanroom class ISO 7Water-repellent surface, EN 14126 infection protectionOne-time use – no reprocessing required
not available
From
€11.20
100 Stück