Bump cap "Safe" | PE
- approved according to EN 812, protects against light impacts
- made in Germany, various colours available
- easy to clean, cold-resistant down to -30 °C
- comfortable thanks to low weight (220 g)
- interior with 4-point headband, provides good shock absorption
Similar articles
Tector® Meister 40031, safety helmets
Tector® Meister 40031, safety helmets
The safety helmets set the standard for safety and comfort in demanding working environments. They fulfil the requirements of the EN 397 standard and therefore offer reliable protection for your head.
The helmet shell is made of polyethylene (HDPE), which is both lightweight and robust. The head width is individually adjustable from 51 to 63 cm to ensure a perfect fit for every wearer. Whether you have a smaller or larger head circumference, this helmet adapts to your needs.
In addition, this helmet has been tested for cold resistance down to -10 °C and therefore offers protection in various environments and weather conditions. You can be sure that your head is well protected in cold working environments.
Properties of the Tector® Meister 40031 safety helmet at a glance:
with lowered neck section
Ventilation openings at the top
sweatband
Detachable chin strap included
6-point suspension made from textile straps
30 mm pockets for accessories
with Pinlock fastener
not available
From
€5.05
1 Stück
Tector® Industrie 4003, safety helmets
Tector® Industrie 4003, safety helmetsThe Tector® Industrie 4003 safety helmet is a robust and comfortable industrial helmet designed for professional use in demanding working environments. The helmet shell made from HDPE is suitable for a temperature range from −10 °C to +50 °C and provides reliable protection while remaining lightweight at approx. 360 g.The 6‑point textile suspension with shock‑absorbing straps ensures even weight distribution and enhances wearing comfort, even during longer periods of use. A padded neck strap with rotary adjustment allows stepless size adjustment from 52 to 64 cm using just one hand.The helmet features a visor with a length of approx. 3 cm, ventilation openings in the upper area and an extended rear section for added neck protection. Side accessory slots with an approx. 30 mm slot width allow the use of compatible accessories.A fitted non‑woven sweatband supports a comfortable wearing experience and is complemented by an adjustable and removable textile chin strap with 2‑point suspension.Properties of Tector® Industrie 4003, safety helmets at a glance:material: helmet shell made from HDPEhead size: 52 – 64 cmtemperature range: −10 °C to +50 °Cweight: approx. 360 gwith approx. 3 cm long visor6‑point textile suspension with shock‑absorbing strapssize adjustment via rotary adjustment systemventilation openings and extended neck protectionside accessory slots with approx. 30 mm openingincludes sweatband and removable chin strap
not available
From
€4.14
1 Stück
Tector® Runner 4034, shock protection caps
Tector® Runner 4034, shock protection caps
The shock protectoin caps set new standards in terms of comfort and protection. The baseball cap is made of high-quality 100% cotton, while the shell is made of robust ABS material and is also removable.
With an individually adjustable head width of 54 to 59 cm, the bump caps offer a perfect fit for every head. The side openings ensure excellent ventilation.
The Velcro fastener enables effortless size adjustment so that you can adapt the cap precisely to your needs. As a result, it always fits securely and comfortably without slipping.
Properties of Tector® Runner 4034, bump caps at a glance:
Material: Baseball cap: 100 % cotton Shell: ABS, removable
Colors: see color chart
Head width: 54-59 cm, individually adjustable
approx. 165g
good ventilation through side openings
good wearing comfort
size adjustment with Velcro fastener
not available
From
€6.40
1 Stück
Elysee® Greg 4020, shock protection caps
Elysee® Greg 4020, shock protection caps
The protection caps are the choice for anyone who favours quality, comfort and a trendy design. With an individually adjustable head width of 53 to 59 cm, they offer an optimum fit for every head. The sliding fastener at the back makes it easy to adjust the size so that you can customise the cap to your exact requirements.
These protection caps are characterised by quality, making them a first-class choice for sports and leisure activities. The integrated reflective piping increases your visibility in low light conditions, which significantly improves safety during training or in everyday life.
The 2-colour contrasting peak with embroidered intermediate section, also known as a sandwich peak, gives the cap a modern and appealing look.
Translated with DeepL.com (free version)
Properties of Elysee® Greg 4020, shock protection caps at a glance:
upper material: Baseball cap:65% polyester/ 35% cotton Shell:PP
head width: 53-59 cm, individually adjustable
weight approx. 185 g
high-quality baseball cap
size adjustment with slide fastener at the back
integrated reflective piping
2-coloured visor with embroidered intermediate section (sandwich peak)
not available
From
€14.40
1 Stück
New
Tector® Kjell 22582, uv neck protection
Tector® Kjell 22582, uv neck protectionThe Tector® Kjell 22582 UV neck protection is a functional accessory designed for professional use on sunny working days. Made from 100% polyester with a fabric weight of approx. 130 g/m², the neck protection offers reliable UV protection without restricting the wearer’s field of vision. With a UPF 40+ UV protection factor, it effectively protects against intense sun exposure during the summer months. The UV neck protector is eligible for BG BAU funding and is compatible with Tector® Industrie 4003, safety helmets (art.-no. TF4003001) and Tector® Meister 40031, safety helmets (art.-no. TF40031001).Properties of Tector® Kjell 22582, uv neck protection at a glance:outer material: 100% polyesterfabric weight: approx. 130 g/m²functional UV neck protection for sunny working dayslightweight and comfortable to weardoes not restrict visibilityUPF 40+ UV protection against sun exposureeligible for BG BAU fundingcompatible with Tector® Industrie 4003, safety helmets (art.-no. TF4003001) and Tector® Meister 40031, safety helmets (art.-no. TF40031001)
not available
From
€1.50
1 Stück
New
Elysee® Kolja 22581 uv cap, with neck protection
Elysee® Kolja 22581 uv cap, with neck protectionThe Elysee® Kolja 22581 UV cap is a functional bump cap with integrated neck protection, designed for professional use on sunny working days. The 6‑panel cap is made from 100% polyester and comes in a universal size. A detachable UV neck flap provides additional protection against sun exposure without restricting visibility. The integrated elastic insert ensures a secure and comfortable fit. For improved visibility, the UV cap features reflective piping on the peak and crown. With a UPF 40+ UV protection factor, it offers reliable protection during the summer months and is also eligible for BG BAU funding.Properties of Elysee® Kolja 22581 uv cap, with neck protection at a glance:outer material: 100% polyesterfunctional 6‑panel cap with integrated neck protectiondetachable UV neck flap for additional sun protectionelastic insert for a secure and comfortable fitreflective piping on peak and crownUPF 40+ UV protection for sunny working dayseligible for BG BAU funding
not available
From
€3.54
1 Stück
Bump cap Safe made of PE
The bump cap Safe meets the safety requirements of EN 812 and offers reliable protection with minimal weight. Weighing only 220 g, it is particularly light and ideal for long periods of wear – perfect for production environments where comfort and hygiene are crucial. As the safety cap is made entirely of plastic, it is germ-free, particularly hygienic and ideal for the food industry, where fabric materials are not permitted. Inside, a washable and replaceable sweatband ensures a clean wearing experience. The soft LDPE headband provides a secure fit and a firm hold. The bump cap Safe is cold-resistant down to -30 °C, making it suitable for use in refrigerated production areas. Thanks to its adjustable head circumference of 53–61 cm, it fits flexibly on any head size.
In short: The bump cap Safe is a hygienic and comfortable solution for anyone who needs reliable head protection in sensitive areas.
Advantages of the bump cap at a glance:
- certified according to EN 812
- very light, 195 g
- ideal for the food industry, where fabrics are not permitted for hygiene reasons – germ-free and hygienic
- comfortable sweatband on the inside, washable and replaceable – very hygienic
- interior: headband made of soft LDPE for a good fit and hold
- cold-resistant to -30°C
- adjustable head circumference: 53 - 61 cm
Functional range
ideal for hygiene-sensitive areas in the food industry, meat processing plants, automotive industry
Properties
| Type of inner packaging: | PE |
|---|---|
| Type of outer packaging: | cardboard |
| material: | PE |
| Norms: |
    |
Certifications / Standards
| CE PSA VO (EU) 2016-425 |
| CAT 3 - Personal protective equipment category 3 |
| EN 812 |
| product information |
Overview all norms of Bump cap "Safe" | PE
Download all documents for your product here:
Declaration of conformity for personal protective equipment
For completed orders you can also download all documents collected in your order overview!
Supplier-informations
| address: | Franz Mensch GmbH, Werner-von-Siemens-Str. 2, 86807 Buchloe, Deutschland |
| e-mail: | [email protected] |
| EAN(s): |
Carton 4015544952100 Package 4017765057787 |
| manufacturer art.-no.: | 9248325330 |
Buy together with
Banded ear plugs | detectable
Bügel-Gehörschutz - detektierbar: ideal wenn der Gehörschutz oft auf- und abgesetzt wird, schneller als Stöpsel mit Kordelbei Nicht-Gebrauch: Bügel einfach um den Hals tragenaus Spezial-KunststoffBügel und Stöpsel detektierbarmit wechselbaren Nachfüll-AufsätzenLamellenform für sehr guten Lärmschutz und Komfort - SNR-Wert: 25 dB
not available
From
€2.32
1 Stück
Respirators FFP3 NR with valve, vertically foldable | PP
Respirators FFP3 NR with valve, vertically foldable made of PP by HygostarThe FFP3 respirators with valve meet the highest category of respiratory protection filter classes. FFP3 masks protect against toxic and harmful dusts, smoke and aerosols. They are particularly suitable for sensitive areas where hygiene and protection against infection are top priorities. These include medicine, laboratory, nursing, hospital as protective equipment, industry and food industry. the respirators FFP3 NR have an integrated valve. So you breathe noticeably easier and more comfortable. The masks are fixed with head band - without pressing behind the ear. So the FFP3 masks feel comfortable even when worn for long periods.Features of the respirators FFP3 NR with valve, vertically foldable at a glance:high wearing comforthigh-quality material made of PP fleecevertically folded, large breathing surfacevalve facilitates inhalation and exhalationwith head band - no pressure behind the earwith clip for easier putting on and taking off of the maskflexible nose clip for tight fiteach mask individually packed in a hygienic bag, 10 x 10 bags in a box
not available
From
€63.05
100 Stück
Multipurpose glasses "Fit Plus"
Multipurpose goggles "Fit Plus"
The all-purpose "Fit Plus" safety goggles are a fashionable lightweight plastic goggle with an easily interchangeable panorama disc made of hard-coated polycarbonate and integrated side protection.
The disc is colorless, but the frame is blue. The bar is adjustable both in length and in height. The coating makes the disc very resistant to scratching and many chemicals.
The general-purpose goggles are very light and provide very good protection for the entire field of vision. These goggles can be used in laboratories, working with compressed air, fine mechanical work, turning, drilling, milling and wood and plastics processing.
It provides good protection against fine-grained dust, small splinters or even sparks.
not available
From
€2.97
1 Stück
teXXor® furniture leather gloves 1165
teXXor® furniture leather gloves 1165The teXXor® furniture leather gloves 1165 impress with a comfortable wearing experience supported by the light and soft lining, while at the same time offering good protection thanks to the reinforced palm. The light-coloured furniture leather combined with white cotton drill ensures a robust, durable quality and safe handling during demanding tasks. With a material thickness of approx. 1.00 mm, the gloves are hard-wearing and ideally suited for heavy-duty work. They are used in crafts and the construction industry as well as for packaging work, warehousing, logistics and transport. These furniture leather gloves also provide reliable protection and high working comfort during rough assembly work in metal workshops and workshops, as well as in agriculture and forestry and horticulture.Properties of teXXor® furniture leather gloves 1165 at a glance:material: furniture leatherthickness: 1.00 mmlength: approx. 29 cmwith cotton drillcomfortable wearing experience thanks to light, soft lininggood protection thanks to reinforced palmsafe handling during demanding taskshard-wearing designideal for heavy-duty work
not available
From
€1.69
1 Paar