Moldex respirators masks FFP

Moldex Air Respirators 3105, FFP2 R D, with Ventex®-valveWhat is important for a respirator to be worn at work?  1. the FFP mask must protect and also be comfortable  2. breathing should feel almost like breathing without an FFP mask  3. the FFP mask should be cost-effectiveWe have combined and perfected these points in our new, reusable generation of Air FFP masks. The AirWave® high-performance filter, the soft, elastic and self-adjusting design, the reusability and the incredibly low breathing resistance make our Air masks the best FFP respiratory protection for you and/or your employees! The pleated filter design reduces inhalation resistance by more than 50% with better performance. The filter area is 260% larger.Our DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions. The nose seal lip improves the seal fit and offers optimum wearing comfort. Protected from dust and dirt, hygienically packaged until use.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.With Ventex Klimaventil®: exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and humidity. Continuous straps: Enables fine adjustment of the distribution of traction on the head. With knitted band: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.The product and packaging are 100% PVC-free.Air FFP masks provide reliable protection against particlesFilter/layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA)Comfort sealing lip, clip: PolyethyleneStraps: Polyester, LycraClimate valve®: Natural rubberProperties of Moldex Air Respirators 3105, FFP2 R D, with Ventex®-valve at a glance:incredibly low breathing resistancereusableclimate valve® facilitates inhalation and exhalationDolomite dust testwith knitted strap and clip fastener for high wearing comfortreliable protection against dust, aerosol and smoke

Moldex Air Respirators 3100, FFP2 R DWhat is important for a respirator to be worn at work?  1. the FFP mask must protect and also be comfortable  2. breathing should feel almost like breathing without an FFP mask  3. the FFP mask should be cost-effectiveWe have combined and perfected these points in our new, reusable generation of Air FFP masks. The AirWave® high-performance filter, the soft, elastic and self-adjusting design, the reusability and the incredibly low breathing resistance make our Air masks the best FFP respiratory protection for you and/or your employees! The pleated filter design reduces inhalation resistance by more than 50% with better performance. The filter area is 260% larger.Our DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions. The nose seal lip improves the seal fit and offers optimum wearing comfort. Protected from dust and dirt, hygienically packaged until use.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.Full-length straps: Allows fine adjustment of the distribution of tension on the head. With knitted strap: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.The product and packaging are 100% PVC-free.Air FFP masks provide reliable protection against particlesFilter/layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA)Comfort sealing lip, clip: PolyethyleneStrap: Polyester, LycraProperties of Moldex Air Respirators 3100, FFP2 R D at a glance:low breathing resistancereusablewithout valveDolomite dust testwith knitted strap and clip fastener for high wearing comfortReliable protection against dust, aerosol and smoke

Moldex Classic Respirators 2405, FFP2 NR D, with Ventex®-valveEven our basic version has all the product advantages that make Moldex FFP masks so successful. The flexible ActivForm® 3D design automatically adapts to the shape and movements of the face. As a result, Moldex masks fit tightly and comfortably, easily and without a nose clip. Our DuraMesh® mask grid keeps FFP masks in shape even under the toughest conditions. A soft, skin-friendly inner fleece provides additional comfort. A bag protects the individually packed masks in the packaging from dust and moisture. With Ventex Climate Valve®: Exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and moisture. Full-length straps: Allows fine adjustment of the distribution of tension on the head. Made in Europe: All Moldex FFP masks are 100% manufactured in Europe. Product and packaging are 100% PVC free.The FFP2 mask provides reliable protection against hazardous dusts and biological agents in risk group 2 and has also passed the dolomite dust test. The mask is not reusable and must be disposed of after use.Filter layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA) strapping, Klimaventil®: natural rubberProperties of Moldex Classic Respirators 2405, FFP2 NR D, with Ventex®-valve at a glance:safe and comfortable thanks to ActivForm® 3D designDuraMesh® mask grid keeps the mask in shapeClimate valve® makes breathing in and out easierDolomite dust testreliable protection against particles

Moldex Air Plus Respirators 3408, FFP3 R D, with ProValveAir Plus FFP masks have an anatomically moulded TPE sealing lip, similar to that of a half-face gas mask. This provides a particularly comfortable seal and can be wiped clean and disinfected. Air Plus masks can be used multiple times, reducing waste and overall costs. The AirWave® pleated filter technology allows a particularly large filter area to be accommodated in the masks. As a result, they have long-lasting low breathing resistance for easy breathing: the pleated filter design reduces inhalation resistance by up to 50% with better performance. A skin-friendly fleece on the inside of the mask and the adjustable, wide knitted strap promise additional wearing comfort. Our flexible ActivForm® 3D design automatically adapts to the shape and movements of the face. Air Plus FFP masks fit tightly and comfortably, easily and without a nose clip. The DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.With ProValve: Integrated valve - minimises condensation droplets from breathing air. Length-adjustable strap: Enables fine adjustment of the distribution of tension on the head. With knitted strap: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.Product and packaging are 100% PVC free.Air Plus FFP masks provide reliable protection against particlesFilter layer, inner layer, DuraMesh®: Polypropylene, ethylene vinyl acetate (EVA)Clip: PolypropyleneComfort sealing lip: Thermoplastic elastomers (TPE)Strap: Polyester, LycraProValve: Polypropylene, synthetic rubberProperties of Moldex Air Plus Respirators 3408, FFP3 R D, with ProValve at a glance:Easy breathing thanks to large filter surfaceReusable due to washable sealing lip and long-life filterwith integrated ProValve to minimise condensation in the exhaled airDolomite dust testWith knitted strap and clip fastener for high wearing comfortReliable protection against particles

Moldex Classic Respirators 2555, FFP3 NR D, with Ventex®-valveEven our basic version has all the product advantages that make Moldex FFP masks so successful. The flexible ActivForm® 3D design automatically adapts to the shape and movements of the face. As a result, Moldex masks fit tightly and comfortably, easily and without a nose clip. Our DuraMesh® mask grid keeps FFP masks in shape even under the toughest conditions. A soft, skin-friendly inner fleece provides additional comfort. A bag protects the individually packed masks in the packaging from dust and moisture. With Ventex Climate Valve®: Exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and moisture. Full-length straps: Allows fine adjustment of the distribution of tension on the head.Made in Europe: All Moldex FFP masks are 100% manufactured in Europe. Product and packaging are 100% PVC free.The FFP2 mask provides reliable protection against hazardous dusts and biological agents of risk group 3 and has also passed the dolomite dust test. The mask is not reusable and must be disposed of after use.Filter layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA) Straps, climate valve®: natural rubberProperties of Moldex Classic Respirators 2555, FFP3 NR D, with Ventex®-valve at a glance:Safe and comfortable thanks to ActivForm® 3D designDuraMesh® mask grid keeps the mask in shapeClimate valve® makes breathing in and out easierDolomite dust testReliable protection against particles

Moldex Air Respirators 3205, FFP3 R D, with Ventex®-valveWhat is important for a respirator to be worn at work?  1. the FFP mask must protect and also be comfortable  2. breathing should feel almost like breathing without an FFP mask  3. the FFP mask should be cost-effectiveWe have combined and perfected these points in our new, reusable generation of Air FFP masks. The AirWave® high-performance filter, the soft, elastic and self-adjusting design, the reusability and the incredibly low breathing resistance make our Air masks the best FFP respiratory protection for you and/or your employees! The pleated filter design reduces inhalation resistance by more than 50% with better performance. The filter area is 260% larger.Our DuraMesh® mask grid keeps the FFP masks in shape even under the toughest conditions. The nose seal lip improves the seal fit and offers optimum wearing comfort. Protected from dust and dirt, hygienically packaged until use.With clip fastener: Easy to put on and take off; the mask can be worn comfortably around the neck during breaks or when not in use.With Ventex Klimaventil®: exhalation valve with extra large opening, the valve opens at the lowest exhalation pressure and thus reduces heat and humidity. Continuous straps: Enables fine adjustment of the distribution of traction on the head. With knitted band: soft and stretchy, for high wearing comfort.Made in Europe: All Moldex FFP masks are manufactured 100% in Europe.The product and packaging are 100% PVC-free.Air FFP masks provide reliable protection against particlesFilter/layer, inner layer, DuraMesh®: polypropylene, ethylene vinyl acetate (EVA)Comfort sealing lip, clip: PolyethyleneStraps: Polyester, LycraClimate valve®: Natural rubberProperties of Moldex Air Respirators 3205, FFP3 R D, with Ventex®-valve at a glance:low breathing resistanceReusableClimate valve® facilitates inhalation and exhalationDolomite dust testwith knitted strap and clip fastener for high wearing comfortReliable protection against dust, aerosol and smoke