BLS FFP3 masks

BLS Respirators Zer033, FFP3 R D, with valveThe 3-flap filter masks in the BLS Zer0 Flat series offer a high level of protection combined with exceptional breathing comfort. They have a surface micromesh that prevents clogging of the filter material and the absorption of liquids, thus extending the service life of the mask. The face mask offers the protection of a P3 with the breathability of a P1 and can be used for more than one work shift. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently, which is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The masks offer protection against: Particles and nano-particles (ultra-fine dust), aerosols, biological agents, viruses. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033, FFP3 R D, with valve at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valveTextile straps to avoid trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological 

BLS Respirators BLS O2 103V, FFP3 NR D, with valveThe BLS O2 103V FFP3 NR D disposable filter mask guarantees respiratory protection against aerosols and solid particles. The cup-shaped design, the elasticated straps attached at four points and the external nose clip, which can be moulded to the face mask, ensure the best fit for most face types. The external nose clip can be optimally adapted to the nose profile. The exhalation valve reduces breathing resistance and reduces moisture inside the mask, making breathing safer even in humid or very hot workplaces. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. The shelf life of the mask is 10 years.Properties of BLS Respirators BLS O2 103V, FFP3 NR D, with valve at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testWith exhalation valve with low breathing resistanceFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols

BLS Respirators Zer030 NV, FFP3 R DThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents fabric clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, placed inside between the layers of filter material, adapts perfectly to the nose and eye profile, ensuring good vision and maximum compatibility with eyewear. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. The shelf life of the masks is 10 years!Features of the BLS Respirators Zer030 NV, FFP3 R D at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valvelIntegrated nose wing and welded strapsSimple, intuitive useShelf life of the mask: 10 yearsProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

BLS Respirators Zer032 C flame retardant, FFP3 R D, with valveThe new series of BLS moulded masks has been designed to offer you both: Maximum protection and maximum comfort. The mask offers flame protection and is therefore ideal for welding work. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elasticated straps makes it easy and secure to fit all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odours caused by organic and acid gases and vapours, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. Suitable against gases and vapours that are organic as well as acidic with concentrations lower than TLV.Properties of BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve at a glance:with flame protectionIdeal for welding work (even with by-products such as ozone)Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapours with concentrations below the TLV limit valueIntegrated nose flap and adjustable strapsWith sealing tape to effectively prevent leaks, even with most bearded wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

BLS Respirators Zer031, FFP3 R D, with valveThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, placed inside between the layers of filter material, adapts perfectly to the nose and eye profile, ensuring good vision and maximum compatibility with eyewear. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. The shelf life of the masks is 10 years!Features of the BLS Respirators Zer031, FFP3 R D, with valve at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated nose piece and welded strapsWith sealing tape to effectively prevent leaks, even with most beard wearersSimple, intuitive useShelf life of the mask: 10 yearsProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

BLS Respirators Zer033 NV, FFP3 R DThe double-folded FFP3 respirator BLS Zer0 33 Flat is a high-end mask that offers maximum protection against: Particles and nanoparticles (ultra-fine dust), aerosols, biological agents, viruses. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently. This is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033 NV, FFP3 R D at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceTextile straps to prevent trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses

BLS Respirators Zer031 C, FFP3 R D, with valveThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odors from organic and acid gases and vapors, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses.Features of the BLS Respirators Zer031 C, FFP3 R D, with valve at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapors with concentrations below the TLV limit valueIntegrated nose flap and welded strapsWith sealing tape to effectively prevent leaks, even with most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses