BLS respirator
BLS combines expertise and innovation to develop protective solutions for occupational safety, industry and healthcare. Whether FFP2, FFP3, half or full face masks - as a reliable partner, BLS offers maximum safety and modern design.
BLS: Protection that breathes.
Sorting:
BLS Respirators Zer033, FFP3 R D, with valve
BLS Respirators Zer033, FFP3 R D, with valveThe 3-flap filter masks in the BLS Zer0 Flat series offer a high level of protection combined with exceptional breathing comfort. They have a surface micromesh that prevents clogging of the filter material and the absorption of liquids, thus extending the service life of the mask. The face mask offers the protection of a P3 with the breathability of a P1 and can be used for more than one work shift. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently, which is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The masks offer protection against: Particles and nano-particles (ultra-fine dust), aerosols, biological agents, viruses. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033, FFP3 R D, with valve at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valveTextile straps to avoid trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological
not available
From
€2.74
1 Stück
BLS Respirators BLS O2 103V, FFP3 NR D, with valve
BLS Respirators BLS O2 103V, FFP3 NR D, with valveThe BLS O2 103V FFP3 NR D disposable filter mask guarantees respiratory protection against aerosols and solid particles. The cup-shaped design, the elasticated straps attached at four points and the external nose clip, which can be moulded to the face mask, ensure the best fit for most face types. The external nose clip can be optimally adapted to the nose profile. The exhalation valve reduces breathing resistance and reduces moisture inside the mask, making breathing safer even in humid or very hot workplaces. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. The shelf life of the mask is 10 years.Properties of BLS Respirators BLS O2 103V, FFP3 NR D, with valve at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testWith exhalation valve with low breathing resistanceFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols
not available
From
€1.50
1 Stück
BLS Respirators 670next, FFP2 NR D
BLS Respirators 670next, FFP2 NR DThe FFP2 respirator BLS 670next is a 2-fold folded respirator. It is available in 2 different sizes, offering the perfect fit. The mask has a shelf life of 10 years! The mask is without an exhalation valve. The mask can be optimally adjusted in the nose area with the internal nose clip. The textile elastic bands are made of a hypoallergenic, latex-free material and offer a secure and optimal fit and prevent hair from getting caught. Designed as a disposable mask (NR = Not Reusable), the mask has a dolomite dust test. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The addition of an innovative inner core gives the filter mask strength and high breathability combined with low breathing resistance.Properties of BLS Respirators 670next, FFP2 NR D at a glance:2-fold folded design for particularly low breathing resistanceDolomite dust testWithout exhalation valveTextile straps - to avoid trapped hairHygienic individual packagingShelf life of the mask: 10 yearsProtection against dusts/smoke/aerosols of particles of medium toxicity in concentrations
not available
From
€0.85
1 Stück
BLS Respirators Zer033 NV, FFP3 R D
BLS Respirators Zer033 NV, FFP3 R DThe double-folded FFP3 respirator BLS Zer0 33 Flat is a high-end mask that offers maximum protection against: Particles and nanoparticles (ultra-fine dust), aerosols, biological agents, viruses. The breathing resistance is demonstrably significantly reduced by the filter material, the solid core and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. Faces are shaped differently. This is why the Zer0 33 Flat is available in 2 different sizes. This is the only way you can be sure that your mask really fits tightly. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. This can be verified on site in the fit test. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, aerosols, liquid splashes and mechanical damage. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. The shelf life of the masks is 10 years! Translated with DeepL.com (free version)Properties of BLS Respirators Zer033 NV, FFP3 R D at a glance:3-flap filter masksParticularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceTextile straps to prevent trapped hairsWith sealing tape to effectively prevent leaks, even for most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€2.09
1 Stück
BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve
BLS Respirators Zer032 C flame retardant, FFP3 R D, with valveThe new series of BLS moulded masks has been designed to offer you both: Maximum protection and maximum comfort. The mask offers flame protection and is therefore ideal for welding work. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-coloured AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elasticated straps makes it easy and secure to fit all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odours caused by organic and acid gases and vapours, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. Suitable against gases and vapours that are organic as well as acidic with concentrations lower than TLV.Properties of BLS Respirators Zer032 C flame retardant, FFP3 R D, with valve at a glance:with flame protectionIdeal for welding work (even with by-products such as ozone)Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapours with concentrations below the TLV limit valueIntegrated nose flap and adjustable strapsWith sealing tape to effectively prevent leaks, even with most bearded wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€6.55
1 Stück
BLS 221 Respiratory protection filter A2 P3 R with bayonet connection
BLS 221 Respiratory protection filter A2 P3 R with bayonet connectionThe BLS 221 combination filter with protection class A2 P3R is used to protect against organic gases and vapors with a boiling point > 65° C. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of particularly high-quality activated carbon with excellent filtration performance. Only activated carbon without toxic additives such as hexavalent chromium (Cr VI) is used. The filter is suitable for handling particles and solvent vapors (e.g. when sanding, painting, handling adhesives and polyester resin, isocyanates, cleaning work with solvents, pesticides, ...). Bayonet connection b-lock: The respiratory protection filter has a bayonet connection. The division into 2 filters ensures optimum weight distribution of the mask. At the same time, the field of vision is significantly enlarged. Can be used with BLS 4000 next half masks and 5600 full face masks.Features of the BLS 221 Respiratory protection filter A2 P3 R with bayonet connection at a glance:Combination filter with protection class A2 P3For protection against class 2 organic gases and vapors and class 3 particles/dustBayonet fitting (b-lock)Filter housing is made of sturdy, impact-resistant ABS filter material with activated carbonWeight approx. 135gCan be used with BLS 4000 next half masks and 5600 full face masks
not available
From
€7.40
1 Stück
BLS Half mask respirator 4000next R with bayonet connection
BLS Half mask respirator 4000next R with bayonet connectionThe 4000next half mask is a particularly lightweight, easy-to-use respirator.respirator mask. The mask is equipped with a bayonet quick-release fastener. When changing the filter, a quarter turn is all it takes to remove the filteror to attach a new filter. An integrated locking function ensures that the filters are held securely in place during use. By using 2 filter elements, the respirator half mask offers a particularly large field of vision and optimized weight distribution. During the development of the half mask, the weight was reduced by 25% compared to conventional half masks thanks to design measures. Cleaning and maintenance of this respirator half mask is also particularly easy. The mask can be dismantled in just a few seconds without any tools. Drop-off procedure: easy removal of the mask during work interruptions without having to remove the mask completely. This leaves your hands free for other activities.Note: 2 BLS 200 series filters matching the hazard potential are required for use!Features of the BLS Half mask respirator 4000next R with bayonet connection at a glance:Particularly lightweight, easy-to-use respirator half maskParticularly large field of visionBayonet connection for 2 respirator filtersCan be completely dismantled for easy cleaning and maintenanceWith drop-off functionMask weight reduced by 25% for high wearing comfortMade of soft thermoplastic rubber (TPE)Weight approx. 102g2 BLS 200 series filters matching the hazard potential are required for use
not available
From
€12.55
1 Stück
BLS Prefilter, Respiratory protection prefilter for air purifying respirator
BLS Prefilter, Respiratory protection prefilter for air purifying respiratorThe BLS TMP3 particle filter is part of the BLS 2600 respiratory protection blower system and protects against solid and liquid, radioactive and highly toxic particles, asbestos, fibers and microorganisms such as bacteria and viruses. No protection against gases and vapors. The TMP3 pre-filter is fitted between the filter and the filter ring nut to prevent the TMP3 filter from clogging and to extend its service life. The BLS TMP3 filters have a special connection and can only be used with the BLS 2600 next respiratory protection blower. The tight fit of the filter is ensured by the pressure exerted by the filter ring nut on the seal.Features of the BLS Prefilter, Respiratory protection prefilter for air purifying respirator at a glance:Particle pre-filter for BLS respiratory protection filter TMP3The TMP3 pre-filter is fitted between the filter and the filter ring nut to prevent clogging of the TMP3 filter and extend its service life.Can only be used with the BLS TMP3 filter and the BLS 2600next blower respirator
not available
From
€29.00
50 Stück
BLS Respirators Zer031, FFP3 R D, with valve
BLS Respirators Zer031, FFP3 R D, with valveThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, placed inside between the layers of filter material, adapts perfectly to the nose and eye profile, ensuring good vision and maximum compatibility with eyewear. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. The shelf life of the masks is 10 years!Features of the BLS Respirators Zer031, FFP3 R D, with valve at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated nose piece and welded strapsWith sealing tape to effectively prevent leaks, even with most beard wearersSimple, intuitive useShelf life of the mask: 10 yearsProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€2.79
1 Stück
BLS Q530 Disinfectant wipes
BLS Q530 Disinfectant wipesReusable respiratory protection full and half masks must be cleaned and disinfected after use. This can be done quickly and easily with BLS wipes. The active ingredients in the disinfectants are specially formulated for the mask materials. Suitable for all reusable BLS full and half masks.Properties of the BLS Q530 Disinfectant wipes at a glance:Wipes for disinfecting reusable respiratory protection full and half masksIngredients matched to the mask materials
not available
From
€10.40
10 Stück
BLS Respirators 680next, FFP2 NR D, with valve
BLS FFP2 NR D, respiratory masks 680nextThe FFP2 respirator BLS 680next is a 2-fold folded respirator. It is available in 2 different sizes, offering the perfect fit. With a low breathing resistance exhalation valve that allows exhaled air to escape more easily and ensures a high level of comfort for the user, making the filtering facepiece suitable for hot, humid working environments. The internal nose clip allows the mask to be optimally adjusted in the nose area. The textile elastic straps are made of a hypoallergenic, latex-free material and offer a secure and optimal fit and prevent hair from getting caught. Designed as a disposable mask (NR = Not Reusable), the mask has a dolomite dust test. The BLS 600next filter masks can be used to protect the user from solid and/or liquid non-volatile particles up to 12* times the limit value (TLV-TWA). The addition of an innovative inner core gives the filter mask strength and high breathability combined with low breathing resistance. The mask has a shelf life of 10 years!Features of the BLS FFP2 NR D, 680next respirators at a glance:2-fold folded design for particularly low breathing resistanceDolomite dust testWith exhalation valve with low breathing resistanceTextile straps made of hypoallergenic, latex-free materialHygienic individual packagingShelf life of the mask: 10 yearsProtection against dusts/smoke/aerosols of particles of medium toxicity in concentrations
not available
From
€1.02
1 Stück
BLS Respirators O2 102, FFP2 NR D
BLS Respirators O2 102, FFP2 NR DThe BLS O2 102 disposable respirator offers respiratory protection against solid particles and aerosols. The cup shape, the four-point elasticated strap and the nose clip that can be adapted to the filter material ensure excellent adaptability to most face shapes. The special shape of the moulded respirator offers increased wearing comfort thanks to reduced breathing resistance. The external nose clip adapts perfectly to the nose profile and ensures good vision, even for spectacle wearers. The mask is designed as a disposable mask (NR = Not Reusable) and has an additional dolomite dust test. Shelf life of the mask: 10 years.Properties of BLS Respirators O2 102, FFP2 NR D at a glance:Cup shape offers increased wearing comfort due to reduced breathing resistanceDolomite dust testwithout exhalation valveFour-point elasticated strapSimple, intuitive useShelf life of the mask: 10 yearsProtection against solid particles and aerosols
not available
From
€0.32
1 Stück
BLS 401 P3 R particle filter with universal connection RD40
BLS 401 P3 R particle filter with universal connection RD40The BLS 401 particle filter with protection level P3 R is used to protect against dusts, fibers and toxic particles/aerosols. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of a pleated fabric. DIN connection RD40: The respiratory protection filter has a DIN connection RD40. This type of respiratory protection filter is also known as a screw-in filter. This means that this filter fits all respiratory protection half masks and full face masks with an RD40 connection.Features of the BLS 401 P3 R particle filter with universal connection RD40 at a glance:Particle filter with protection level P3 RFor protection against dusts, fibers and toxic particles/aerosolsDIN connection RD40Housing of the filter is made of sturdy, impact-resistant ABSWeight approx. 130gCan be used with half and full face masks with universal connection RD40
not available
From
€5.45
1 Stück
BLS 411 respiratory protection filter A2 with universal connection RD40
BLS 411 respiratory protection filter A2 with universal connection RD40The BLS 411 respiratory protection filter with protection level A2 is used to protect against organic gases and vapors with a boiling point > 65° C. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of particularly high-quality activated carbon with excellent filtration performance. Naturally, only activated carbon without toxic additives such as hexavalent chromium (Cr VI) is used. The filter is suitable for handling solvent vapors (e.g. during painting work, handling adhesives, cleaning work with solvents, etc.). DIN connection RD40: The respiratory protection filter has a DIN connection RD40. This means that this filter fits all respiratory protection half masks and full face masks with an RD40 connection.Features of the BLS 411 respiratory protection filter A2 with universal connection RD40 at a glance:Respiratory protection filter with protection level A2For protection against organic gases and vapors as well as particles/dustDIN connection RD40Filter housing is made of sturdy, impact-resistant ABS filter material with activated carbonWeight approx. 178gCan be used with half and full face masks with universal connection RD40
not available
From
€5.75
1 Stück
BLS Respirators Zer030 NV, FFP3 R D
BLS Respirators Zer030 NV, FFP3 R DThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents fabric clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, placed inside between the layers of filter material, adapts perfectly to the nose and eye profile, ensuring good vision and maximum compatibility with eyewear. The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses. The shelf life of the masks is 10 years!Features of the BLS Respirators Zer030 NV, FFP3 R D at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWithout exhalation valvelIntegrated nose wing and welded strapsSimple, intuitive useShelf life of the mask: 10 yearsProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€1.77
1 Stück
BLS Q409 Disinfectant spray
BLS Q409 Disinfectant sprayReusable half and full face masks must be cleaned and disinfected after use. This can be done quickly and easily with the spray from BLS. The active ingredients in the disinfectants are specially formulated for the mask materials. Suitable for all reusable full and half face masks.Properties of the BLS Q409 Disinfectant spray at a glance:Spray for disinfecting reusable respiratory protection full and half masksContent 150mlIngredients adapted to the mask materials
not available
From
€9.35
1 Stück
BLS Full face mask 2150 with universal connection RD40
BLS Full face mask 2150 with universal connection RD40The full-face respirator 2150 from BLS is made of thermoplastic rubber, is classified as a class 2 mask and is highly resistant to chemicals. The mask has an RD40 DIN connection for the secure attachment of a respiratory protection filter. The use of DIN filters offers the user the greatest possible freedom in filter selection. A 6-point headband offers an optimal and secure fit of the respirator with numerous adjustment options. An integrated speech membrane facilitates communication. The significantly lower weight of the BLS 2150 full face mask makes it more comfortable to wear and allows it to be worn for longer periods if required. The masks have an integrated “anti-fog” system thanks to the special air flow of warm air and cold air. This eliminates the need for a coating that wears off over time through cleaning and disinfection. Features of the BLS Full face mask 2150 with universal connection RD40 at a glance:Class 2 full-face respirator made of thermoplastic rubberDIN connection RD40 for a filterFog-free due to airflow - no additional anti-fog coating necessaryLarger field of vision compared to conventional masksWith 6-point strapping and integrated speech membraneEasy maintenanceHigh resistance to chemicalsWeight approx. 458gA suitable respiratory protection filter with RD40 connection is required for use
not available
From
€54.10
1 Stück
BLS Respirators Zer031 C, FFP3 R D, with valve
BLS Respirators Zer031 C, FFP3 R D, with valveThe new series of BLS molded masks has been designed to offer you both: Maximum protection and maximum comfort. The breathing resistance is demonstrably significantly reduced by the filter material, the special shape and the EOLO exhalation valve. It is lower than the standard value of EN 149 for FFP1 respirators. An additional sealing lip made of soft foam offers maximum protection. Possible leaks are thus effectively prevented, even for most beard wearers. The silver-colored AMOR protective layer protects the Zer0 mask from dust, liquid splashes and mechanical damage. This significantly increases the service life of the respirator. They have an upper micromesh that prevents clogging and the build-up of liquids and extends the mask's service life. The ergonomic shape with elastic straps allows an easy and secure fit to all types of faces. It offers an excellent field of vision. The nose clip, which is fitted between the layers of filter material, adapts perfectly to the nose and eye profile and ensures good vision and maximum compatibility with spectacles. The integrated activated carbon layer can retain unpleasant odors from organic and acid gases and vapors, including ozone, in concentrations below the threshold limit value (TLV). The Zer0 respirators are reusable (R = Reusable) and have an additional dolomite dust test. As a high-end mask, it offers maximum protection against: Particles and nanoparticles, aerosols, biological agents and viruses.Features of the BLS Respirators Zer031 C, FFP3 R D, with valve at a glance:Particularly low breathing resistance (< than with commercially available FFP1 masks)Dolomite dust testWith exhalation valve with low breathing resistanceIntegrated activated carbon layer to protect against gases and vapors with concentrations below the TLV limit valueIntegrated nose flap and welded strapsWith sealing tape to effectively prevent leaks, even with most beard wearersSimple, intuitive useProtection against ultra-fine dust, nanoparticles, aerosols, biological agents and viruses
not available
From
€3.76
1 Stück
BLS 222 Respiratory protection filter ABEK1 P3 R with bayonet connection
BLS 222 Respiratory protection filter ABEK1 P3 R with bayonet connectionThe BLS 222 combination filter with protection level ABEK1 P3R is used to protect against organic, inorganic, acid gases and vapors and ammonia and its derivatives in low concentrations as well as dust and particles. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of particularly high-quality activated carbon with outstanding filtration performance. Naturally, only activated carbon without toxic additives such as hexavalent chromium (Cr VI) is used. The filter has a wide range of applications and is suitable for handling acidic cleaning agents, organic and inorganic substances and ammonia and its derivatives. Bayonet connection b-lock: The respiratory protection filter has a bayonet connection. The division into 2 filters ensures optimum weight distribution of the mask. At the same time, the field of vision is significantly enlarged. Can be used with BLS 4000 next half masks and 5600 full face masks.Features of the BLS 222 Respiratory protection filter ABEK1 P3 R with bayonet connection at a glance:Respiratory protection filter with protection class ABEK1 P3For protection against organic, inorganic, acid gases and vapors and ammonia and its derivatives in low concentrations class 1 as well as dusts and particles class 3Bayonet closure (b-lock)Filter housing is made of sturdy, impact-resistant ABS filter material with activated carbonWeight approx. 151gCan be used with BLS 4000 next half masks and 5600 full face masks
not available
From
€8.35
1 Stück
BLS 212 AX Respiratory protection filter with bayonet connection
BLS 212 AX Respiratory protection filter with bayonet connectionThe BLS 212 respiratory protection filter with protection level AX is used to protect against organic gases and vapors with a boiling point < 65° C. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of particularly high-quality activated carbon with excellent filtration performance. Naturally, only activated carbon without toxic additives such as hexavalent chromium (Cr VI) is used. The filter is suitable for handling highly volatile solvent vapors (e.g. during painting work, handling acetone, etc.).Attention: AX class filters may only be used once. They are not suitable for mixtures of low boilers and other organic compounds. Bayonet connection b-lock: The respiratory protection filter has a bayonet connection. The division into 2 filters ensures optimum weight distribution of the mask. At the same time, the field of vision is significantly enlarged. Can be used with BLS 4000 next half masks and 5600 full face masks.Features of the BLS 212 AX Respiratory protection filter with bayonet connection at a glance:Respiratory protection filter with protection level AXFor protection against organic gases and vapors with a boiling point < 65° CBayonet fitting (b-lock)Filter housing is made of sturdy, impact-resistant ABS filter material with activated carbonWeight approx. 111gCan be used with BLS 4000 next half masks and 5600 full face masks
not available
From
€4.99
1 Stück
BLS Half mask respirator 4400next, set with filters protection class ABEK1 P3 R
BLS Half mask respirator 4400next, set with filters protection class ABEK1 P3 RPreconfigured sets for direct use and POS stations in retail outlets. Each set contains a BLS Series 4000 next mask and two pre-assembled filters of filter type ABEK1 P3R. Areas of application include the steel industry, the chemical/pharmaceutical industry, pest control and the carpentry trade. The mask protects against organic, inorganic + acid gases + ammonia + particles + hydrogen fluoride + nanoparticles. The BLS 4000 respirators are made of thermoplastic rubber (TPE). They are used in combination with double bayonet filters and quick connectors and protect against toxic gases, vapors and particles. The front shield is equipped with a quick hook/unhook system and sliding rubbers. This allows the mask to be lowered quickly and easily without having to remove the headpiece.Features of the BLS Half mask respirator 4400next, set with filters protection class ABEK1 P3 R at a glance:Set with one BLS Series 4000 next mask and two pre-assembled filters of filter type ABEK1 P3RFor protection against organic, inorganic + acid gases + ammonia + particles + hydrogen fluoride + nanoparticlesSize M/LBayonet closure (b-lock)Mask weight reduced by 25% for high wearing comfortWeight of the mask: approx. 102gEasy to clean
not available
From
€32.40
1 Set
BLS TMP3 Respiratory protection filter P3 R for air purifying respirator
BLS TMP3 Respiratory protection filter P3 R for air purifying respiratorThe BLS TMP3 particle filter is part of the BLS 2600 respiratory protection blower system and protects against solid and liquid, radioactive and highly toxic particles, asbestos fibers and microorganisms such as bacteria and viruses. No protection against gases and vapors. The BLS TMP3 filters have a special connection and can only be used with the BLS 2600 next respiratory protection blower. The tight fit of the filter is ensured by the pressure exerted by the filter ring nut on the seal.Features of the BLS TMP3 Respiratory protection filter P3 R for air purifying respirator at a glance:Particle filter with protection level P3 RFor protection against solid and liquid, radioactive and highly toxic particles, asbestos fibers and microorganisms such as bacteria and virusesNo protection against gases and vaporsCan only be used with the BLS 2600next blower respirator
not available
From
€66.55
6 Stück
BLS 202 Respiratory protection particle filter P3 R for bayonet connection
BLS 202 Respiratory protection particle filter P3 R for bayonet connectionThe BLS 202 particle filter with protection level P3 R is used to protect against dusts, fibers and toxic particles/aerosols. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of a pleated fabric. Bayonet connection b-lock: The respiratory protection filter has a bayonet connection. The division into 2 filters ensures optimum weight distribution of the mask. At the same time, the field of vision is significantly enlarged. Can be used with BLS 4000 next half masks and 5600 full face masks.Features of the BLS 202 Respiratory protection particle filter P3 R for bayonet connection at a glance:Particle filter with protection level P3 RFor protection against dusts, fibers and toxic particles/aerosolsBayonet fitting (b-lock)Housing of the filter is made of sturdy, impact-resistant ABSWeight approx. 67gCan be used with BLS 4000 next half masks and 5600 full face masks
not available
From
€3.97
1 Stück
BLS K-19 Protective film, for full face masks BLS 5000 series
BLS K-19 Protective film, for full face masks BLS 5000 seriesAcetate films can be used to protect the viewing window of full-face respirators from splashes of chemicals or paint mist during painting. The films are stuck onto the viewing window (similar to a display protection film on mobile phones). If the films become soiled after use, they can simply be replaced. The viewing window of the full-face respirator remains protected and extends the service life of the respirator. For all BLS full-face respirators in the 5000 series.Features of the BLS K-19 Protective film, for full face masks BLS 5000 series at a glance:Protective film for full acetate masksProvide protection against splashes of chemicals or paint mist during paintingEasy to attach to the viewing window of the full face maskSuitable for all BLS full-face respirators in the 5000 series
not available
From
€9.90
1 Stück
BLS 301 P3 R Particle pre-filter for BLS 200 series
BLS 301 P3 R Particle pre-filter for BLS 200 seriesThe BLS particle pre-filters offer the user protection against dust, particles and aerosols that are not separated by the gas filter. The BLS 301 dust pre-filters protect the actual respiratory protection filter against large quantities of particles in the atmosphere and thus extend the service life of the respiratory protection filter. The pre-filter can simply be clicked onto the filter element of the BLS 200 series.Features of the BLS 301 P3 R Particle pre-filter for BLS 200 series at a glance:Particle pre-filter P3For protection against dust, particles and aerosols class 3Weight approx. 7gCan be used with BLS Series 200 filters
not available
From
€2.58
1 Stück
BLS C-22 Frame for prescription lenses, for full face masks BLS 5000 series
BLS C-22 Frame for prescription lenses, for full face masks BLS 5000 seriesThe C-22 frame for corrective lenses from BLS can be quickly and easily integrated into the 5000 series full-face respirators. This offers spectacle wearers the optimum protection of a full-face respirator and clear vision for their work. An optician can simply insert the individual corrective lenses into the frame. The frame is inserted into the full face mask before use and guarantees a secure fit. After use, the frame can be removed from the mask in seconds without tools. This makes it easy to clean the full-face respirator and the insert frame for the corrective lenses. Suitable for all BLS full-face respirators in the 5000 series.Features of the BLS C-22 Frame for prescription lenses, for full face masks BLS 5000 series at a glance:Frame for corrective lensesOffers spectacle wearers the optimum protection of a full-face respirator and clear vision for their workEasy to insert into the full face maskSuitable for all BLS full-face respirators in the 5000 series
not available
From
€22.00
1 Stück
BLS Half mask respirator 4100next, set with filters protection class A2 P2 R
BLS Half mask respirator 4100next, set with filters protection class A2 P2 RPreconfigured sets for direct use and POS stations in retail outlets. The set contains one BLS Series 4000 next mask and two pre-assembled filters of filter type A2 P2R - designed, for example, for use by painters. For protection against organic gases (boiling point: >65°C) + particles. The BLS 4000 respirators are made of thermoplastic rubber (TPE). They are used in combination with double bayonet filters and quick connectors and protect against toxic gases, vapors and particles. The front shield is equipped with a quick hook/unhook system and sliding rubbers. This allows the mask to be lowered quickly and easily without having to remove the headpiece.Features of the BLS Half mask respirator 4100next, set with filters protection class A2 P2 R at a glance:Set with one BLS Series 4000 next mask and two pre-assembled filters of filter type A2 P2RFor protection against organic gases (boiling point: >65°C) + particlesSize M/LBayonet fitting (b-lock)Mask weight reduced by 25% for high wearing comfortWeight of the mask: approx. 102gEasy to clean
not available
From
€26.20
1 Set
BLS C-90 Container for full face masks BLS series 5000 and 3000
BLS C-90 Container for full face masks BLS series 5000 and 3000The C-90 wall container can hold a BLS full-face mask including the necessary filters. The container made of robust plastic is attached to the wall, protects the mask and filter from dust and dirt and, thanks to its fixed position, the full-face respirator is always ready to hand for use or in an emergency.Features of the BLS C-90 Container for full face masks BLS series 5000 and 3000 at a glance:Wall container for full face masks and filtersmade of robust plasticFor mounting on the wallProtects mask and filter from dust and dirt
not available
From
€59.90
1 Stück
BLS 442 Respiratory protection filter Reactor A2 P3 RD with universal connection RD40
BLS 442 Respiratory protection filter Reactor A2 P3 RD with universal connection RD40The BLS 442 combination filter with protection level Reactor A2 P3RD is used to protect against radioactive particles, aerosols, radioactive iodine and iodomethane. The filter housing is made of sturdy aluminum, the filter material consists of pleated glass fiber material with a synthetic binder and particularly high-quality activated carbon with excellent filtration performance. Naturally, only activated carbon without toxic additives such as hexavalent chromium (Cr VI) is used. Areas of application for this combination filter are DIN connection RD40: The respiratory protection filter has a DIN connection RD40. This means that this filter fits all BLS full-face respirators with an RD40 connection. These filters must not be used with half masks as they are heavier than 300g.Features of the BLS 442 Respiratory protection filter Reactor A2 P3 RD with universal connection RD40 at a glance:Combination filter with protection level Reactor A2 P3RDfor protection against radioactive particles, aerosols, radioactive iodine and iodomethaneDIN connection RD40Housing of the filter is made of sturdy, impact-resistant ABSFilter material with activated carbonWeight approx. 355gCan be used with full face masks with universal connection RD40, not suitable for half masks
not available
From
€42.40
1 Stück
BLS Full face mask 5600 R with bayonet connection
BLS Full face mask 5600 R with bayonet connectionThe full-face respirator 5600 from BLS is made of thermoplastic rubber. The mask has two connections with the “b-lock” bayonet system for the secure attachment of two respiratory filters. A 6-point head strap offers an optimal and secure fit of the respirator with numerous adjustment options. The VISOR panoramic field of vision complies with optical class 1 (in accordance with EN 166) - for distortion-free vision. The masks have an integrated “anti-fog” system thanks to the special air flow of warm air and cold air. This eliminates the need for a coating that wears off over time through cleaning and disinfection. A glazing surface coating makes the surface of the field of vision particularly scratch-resistant and offers additional protection against flying particles at a speed of up to 244.5 m/s (V50BL(P) test in accordance with standard MIL-STD-662F:1997)Features of the BLS Full face mask 5600 R with bayonet connection at a glance:Class 2 full-face respirator made of thermoplastic rubber TPE with modern 2-filter systemBayonet connections (b-lock) for 2 filtersFog-free due to airflow - no additional anti-fog coating requiredLive visor - large, distortion-free field of vision of optical class 1 (EN 166)Protection against fast-flying particles6-point strap for optimum fitSuitable for spectacle wearers (insert frame: TBL8102002)Weight approx. 570g
not available
From
€72.25
1 Stück
BLS WPP Respiratory protection pre-filter for universal connection RD40
BLS WPP Respiratory protection pre-filter for universal connection RD40The WPP pre-filters do not have a protective function for the operator, but act as a barrier against the reversal of coarse dust: They extend the life of the gas filter by preventing it from clogging. The pack contains 10 pre-filters and a polypropylene ring to hold the pre-filter in place.Note: They can only be used with the BLS 400 series gas filters (not with dust or combination filters). The area of application includes all work areas where large quantities of coarse dust are generated.Features of the BLS WPP Respiratory protection pre-filter for universal connection RD40 at a glance:WPP pre-filter without protection stageto extend the service life of gas filtersFor work areas where large quantities of coarse dust are generatedPP fastening ringCan be used with BLS 400 series gas filters with DIN connection RD40
not available
From
€4.72
10 Stück
BLS 430 Respiratory protection filter ABEK2Hg P3 R with universal connection RD40
BLS 430 Respiratory protection filter ABEK2Hg P3 R with universal connection RD40The BLS 430 combination filter with protection level ABEK2Hg P3R protects against organic, inorganic, acidic gases and vapors, ammonia and its derivatives, mercury vapour, dust and particles. The filter housing is made of sturdy, impact-resistant ABS and the filter material consists of particularly high-quality activated carbon with outstanding filtration performance. Naturally, only activated carbon without toxic additives such as hexavalent chromium (Cr VI) is used. The filter has a wide range of applications and is suitable for sampling unknown substances, for example. DIN connection RD40: The respiratory protection filter has a DIN connection RD40. This means that this filter fits all full-face respirators with an RD40 connection. These filters must not be used with half masks as they are heavier than 300g.Features of the BLS 430 Respiratory protection filter ABEK2Hg P3 R with universal connection RD40 at a glance:Combination filter with protection class ABEK2Hg P3for protection against organic, inorganic, acid gases and vapors and ammonia and its derivatives class 2 in low concentrations, mercury vapor as well as dusts and particles class 3The filter housing is made of sturdy, impact-resistant ABSFilter material with activated carbonWeight approx. 340gCan be used with full face masks with universal connection RD40, not suitable for half masks
not available
From
€19.20
1 Stück
Our partner BLS
BLS – Respiratory Protection for a Safe Future
For over 50 years, BLS has been synonymous with pioneering respiratory protection solutions that combine reliability and exceptional fit.
Whether FFP2 and FFP3 masks or half and full-face masks – BLS products are tailored to meet the needs of professional users, offering safety paired with thoughtful design.
With a clear focus on quality and sustainability, BLS manufactures in Europe, leveraging advanced technologies to minimize environmental impact. The products are designed not only to protect but also to make breathing easier – ideal for industries, trades, and healthcare. The promise of BLS: Protection that breathes.
Whether FFP2 and FFP3 masks or half and full-face masks – BLS products are tailored to meet the needs of professional users, offering safety paired with thoughtful design.
With a clear focus on quality and sustainability, BLS manufactures in Europe, leveraging advanced technologies to minimize environmental impact. The products are designed not only to protect but also to make breathing easier – ideal for industries, trades, and healthcare. The promise of BLS: Protection that breathes.